PELONIS PSH10C2ABB

คู่มือผู้ใช้เครื่องทำความร้อนไฟฟ้าแบบพัดลมเซรามิก PELONIS PSH10C2ABB 1500W

Model: PSH10C2ABB (DUDULAILE-311-2643)

ด้านหน้า view of the PELONIS PSH10C2ABB 1500W Ceramic Electric Fan Heater

ภาพ: ด้านหน้า view of the PELONIS PSH10C2ABB ceramic heater, showcasing its compact black design with a mesh grille.

1. คำแนะนำด้านความปลอดภัยที่สำคัญ

โปรดอ่านคำแนะนำทั้งหมดอย่างละเอียดก่อนใช้งานเครื่องทำความร้อนนี้ การไม่ปฏิบัติตามคำแนะนำเหล่านี้อาจทำให้เกิดไฟไหม้ ไฟฟ้าช็อต หรือได้รับบาดเจ็บได้

  • ห้ามใช้เครื่องทำความร้อนนี้กลางแจ้ง ออกแบบมาสำหรับใช้ภายในอาคารเท่านั้น
  • เสียบปลั๊กเครื่องทำความร้อนเข้ากับเต้ารับ/ปลั๊กไฟที่ผนังโดยตรงเสมอ อย่าใช้กับสายไฟต่อพ่วงหรือก๊อกน้ำที่เคลื่อนย้ายได้ (เต้ารับ/ปลั๊กไฟพ่วง)
  • เครื่องทำความร้อนนี้จะร้อนเมื่อใช้งาน เพื่อหลีกเลี่ยงการถูกไฟไหม้ อย่าให้ผิวหนังที่เปลือยเปล่าสัมผัสพื้นผิวที่ร้อน
  • วางวัสดุที่ติดไฟได้ เช่น เฟอร์นิเจอร์ หมอน เครื่องนอน กระดาษ เสื้อผ้า และผ้าม่านให้ห่างจากด้านหน้าเครื่องทำความร้อนอย่างน้อย 3 ฟุต (0.9 ม.) และวางให้ห่างจากด้านข้างและด้านหลัง
  • จำเป็นต้องใช้ความระมัดระวังเป็นพิเศษเมื่อเด็กหรือผู้ป่วยใช้เครื่องทำความร้อน รวมถึงทุกครั้งที่ปล่อยให้เครื่องทำความร้อนทำงานและไม่มีใครดูแล
  • ควรถอดปลั๊กเครื่องทำความร้อนทุกครั้งเมื่อไม่ได้ใช้งาน
  • ห้ามใช้งานเครื่องทำความร้อนใดๆ หากสายไฟหรือปลั๊กชำรุด หรือเครื่องทำความร้อนทำงานผิดปกติ ตกหล่น หรือได้รับความเสียหายในลักษณะใดๆ ก็ตาม นำเครื่องทำความร้อนกลับไปยังสถานบริการที่ได้รับอนุญาตเพื่อตรวจสอบ ปรับระบบไฟฟ้าหรือกลไก หรือซ่อมแซม
  • ห้ามใส่หรือให้สิ่งแปลกปลอมเข้าไปในช่องระบายอากาศหรือช่องระบายอากาศ เนื่องจากอาจทำให้เกิดไฟฟ้าช็อต ไฟไหม้ หรือทำให้เครื่องทำความร้อนเสียหายได้
  • เพื่อป้องกันไฟไหม้ที่อาจเกิดขึ้น ห้ามปิดกั้นช่องรับหรือระบายอากาศในลักษณะใดๆ ห้ามใช้บนพื้นผิวที่อ่อนนุ่ม เช่น เตียง เพราะช่องเปิดอาจถูกปิดกั้น
  • This heater has an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the heater, wait 10 minutes for it to cool down, then plug it back in.
  • This heater is equipped with a tip-over safety switch. If the heater is accidentally tipped over, it will automatically shut off. Place the heater on a firm, level surface to resume operation.

2. สินค้าหมดview

The PELONIS PSH10C2ABB is a compact and portable 1500W ceramic electric fan heater designed for efficient indoor heating. It features multiple heat settings and a fan-only mode for year-round use.

คุณสมบัติหลัก:

  • 3 การตั้งค่าความร้อน: 700W, 900W, and 1500W for customizable warmth.
  • โหมดพัดลมอย่างเดียว: Allows for air circulation without heat, suitable for all seasons.
  • เทอร์โมสตัทปรับได้: รักษาระดับอุณหภูมิห้องตามที่คุณต้องการ
  • การออกแบบกะทัดรัดและพกพาสะดวก: Easy to move between rooms with a cool-touch handle.
  • องค์ประกอบความร้อนเซรามิก: Provides rapid and energy-efficient heating.
  • คุณสมบัติด้านความปลอดภัย: Overheat protection and tip-over switch for enhanced safety.
Top control panel of the PELONIS PSH10C2ABB heater

ภาพ: ด้านบน view of the heater's control panel, showing the thermostat dial (Min to Max) and the mode selector dial (Off, Fan, Heat 1, Heat 2, Heat 3) with a power indicator light.

3. การตั้งค่า

เนื้อหาแพ็คเกจ:

  • PELONIS PSH10C2ABB Ceramic Electric Fan Heater
  • คู่มือการใช้งาน

การจัดวาง:

  1. Unpack the heater from its packaging and remove all packing materials.
  2. Place the heater on a firm, level, and stable surface. Ensure it is at least 3 feet (0.9 meters) away from walls, furniture, and other combustible materials.
  3. Ensure the power cord is not pinched or placed under the heater.
  4. เสียบปลั๊กเครื่องทำความร้อนเข้ากับเต้ารับไฟฟ้า 127 โวลต์ AC ความถี่ 60 เฮิรตซ์โดยตรง ห้ามใช้สายพ่วงหรือปลั๊กไฟ
PELONIS PSH10C2ABB heater placed on a white shelf in a room

Image: The PELONIS ceramic heater positioned on a shelf, demonstrating proper placement in a living space.

4. คู่มือการใช้งาน

The heater features two control dials on the top panel: one for thermostat control and one for mode selection.

Mode Selection Dial:

This dial controls the power and operating mode of the heater. Rotate the dial to select your desired setting:

  • ปิด: ปิดเครื่องทำความร้อน
  • FAN (indicated by fan icon): Activates the fan without heat, providing air circulation.
  • HEAT 1 (700W): การตั้งค่าความร้อนต่ำ
  • HEAT 2 (900W): การตั้งค่าความร้อนระดับกลาง
  • HEAT 3 (1500W): High heat setting for maximum warmth.

ปุ่มควบคุมเทอร์โมสตัท:

This dial allows you to set your desired room temperature. It works in conjunction with the heat settings.

  1. Turn the Mode Selection Dial to one of the HEAT settings (1, 2, or 3).
  2. Rotate the Thermostat Control Dial clockwise towards "MAX" for higher temperatures, or counter-clockwise towards "MIN" for lower temperatures.
  3. Once the room reaches your desired temperature, slowly turn the Thermostat Control Dial counter-clockwise until the heater turns off. The heater will now cycle on and off to maintain this temperature.

ไฟแสดงสถานะเพาเวอร์: A red light on the control panel illuminates when the heater is powered on and operating.

5. การบำรุงรักษา

การทำความสะอาดอย่างสม่ำเสมอและการจัดเก็บอย่างถูกวิธีจะช่วยให้เครื่องทำความร้อนของคุณมีอายุการใช้งานยาวนานและทำงานได้อย่างมีประสิทธิภาพ

การทำความสะอาด:

  1. ควรถอดปลั๊กเครื่องทำความร้อนออกและปล่อยให้เย็นลงสนิทก่อนทำความสะอาด
  2. ใช้แบบนุ่มๆamp ใช้ผ้าเช็ดทำความสะอาดพื้นผิวภายนอกของเครื่องทำความร้อน ห้ามใช้น้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
  3. ใช้เครื่องดูดฝุ่นที่มีหัวแปรงเพื่อดูดฝุ่นและขุยฝุ่นออกจากช่องรับอากาศและช่องระบายอากาศอย่างเบามือ
  4. ห้ามจุ่มเครื่องทำน้ำอุ่นลงในน้ำ หรือปล่อยให้น้ำหยดเข้าไปในตัวเครื่องทำน้ำอุ่นเด็ดขาด

พื้นที่จัดเก็บ:

When not in use, store the heater in its original packaging or a clean, dry place. Wrap the power cord loosely to prevent damage.

6 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เครื่องทำความร้อนไม่เปิด
  • ไม่ได้เสียบปลั๊ก
  • ปลั๊กไฟไม่ทำงาน
  • เปิดใช้งานการป้องกันความร้อนสูงเกินไป
  • สวิตช์ป้องกันการพลิกคว่ำเปิดใช้งานแล้ว
  • Mode dial set to OFF.
  • ตรวจสอบให้แน่ใจว่าสายไฟเสียบเข้ากับเต้ารับไฟฟ้ากระแสสลับ 127 โวลต์อย่างแน่นหนา
  • ตรวจสอบเซอร์กิตเบรกเกอร์หรือลองใช้เต้ารับอื่น
  • ถอดปลั๊กเครื่องทำความร้อน รอให้เย็นลง 10 นาที แล้วเสียบปลั๊กกลับเข้าไปอีกครั้ง
  • วางเครื่องทำความร้อนบนพื้นผิวที่เรียบสม่ำเสมอ
  • Rotate the mode dial to a heat setting or FAN.
Heater produces no heat in a heat setting.
  • ตัวควบคุมอุณหภูมิตั้งไว้ต่ำเกินไป
  • Room temperature is higher than the thermostat setting.
  • Increase the thermostat setting by rotating the dial towards "MAX".
  • ปรับอุณหภูมิให้สูงขึ้น
เครื่องทำความร้อนเปิดและปิดบ่อยครั้ง
  • Thermostat setting is close to room temperature.
  • อากาศเข้า/ออกอุดตัน
  • This is normal operation as the heater maintains the set temperature.
  • Ensure grilles are clear of obstructions. Clean if necessary.

7. ข้อมูลจำเพาะ

  • แบบอย่าง: PSH10C2ABB (DUDULAILE-311-2643)
  • ยี่ห้อ: เปโลนิส
  • กำลังขับ: 700วัตต์ / 900วัตต์ / 1500วัตต์
  • เล่มที่tage: 127 โวลต์
  • จำนวนความเร็ว: 3 (Heat settings) + Fan-only
  • ขนาด : Approximately 26 x 22 x 13 cm (Package dimensions, actual unit is similar)
  • น้ำหนัก: ประมาณ 500 กรัม
  • คุณสมบัติพิเศษ: Compact, space-saving, energy-saving, lightweight, portable, overheat protection, tip-over switch.
  • สี: สีดำ
Dimensions of the PELONIS PSH10C2ABB heater

Image: Diagram showing the approximate dimensions of the PELONIS heater: 23cm height, 10cm depth, 20cm width.

8. การรับประกันและการสนับสนุน

For warranty information and customer support, please refer to the warranty card included with your product or visit the official PELONIS webไซต์ โปรดเก็บใบเสร็จรับเงินของคุณไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ

If you experience any issues not covered in the troubleshooting section, please contact PELONIS customer service for assistance.

แหล่งข้อมูลออนไลน์:

  • Official PELONIS Webเว็บไซต์: www.เพลอนิส.คอม (หมายเหตุ: นี่เป็นเพียงตัวอย่างชั่วคราว URL, please refer to your product documentation for the correct webเว็บไซต์.)

© 2023 PELONIS สงวนลิขสิทธิ์ทุกประการ

คู่มือนี้มีวัตถุประสงค์เพื่อให้ข้อมูลเท่านั้น ข้อมูลจำเพาะของผลิตภัณฑ์อาจมีการเปลี่ยนแปลงโดยไม่ต้องแจ้งให้ทราบล่วงหน้า

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.