การแนะนำ
This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
ข้อมูลด้านความปลอดภัยที่สำคัญ
คำเตือน: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
- ตรวจสอบให้แน่ใจว่าโครงสร้างผนังสามารถรับน้ำหนักรวมของขาตั้งและโทรทัศน์ได้อย่างปลอดภัย
- Always use an assistant for lifting and positioning the television.
- ห้ามใช้น้ำหนักเกินพิกัดสูงสุดที่ระบุไว้สำหรับแต่ละรุ่นของขาตั้ง
- ตรวจสอบการเชื่อมต่อและตัวยึดทั้งหมดเป็นระยะ เพื่อให้แน่ใจว่ายังคงแน่นหนาดีอยู่
เนื้อหาแพ็คเกจ
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.
PSMFK7 Full Motion TV Wall Mount Components

Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.
- Full Motion Wall Plate Assembly
- ขาตั้งทีวี (2 ชิ้น)
- ชุดอุปกรณ์ติดตั้ง (สกรู พุก และแหวนรองต่างๆ)
- ระดับน้ำ
- สายรัดเคเบิล
PSMTK1 Tilting TV Wall Mount Components

Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.
- Tilting Wall Plate
- ขาตั้งทีวี (2 ชิ้น)
- ชุดอุปกรณ์ติดตั้ง (สกรู พุก และแหวนรองต่างๆ)
- ระดับน้ำ
- สายรัดเคเบิล
การติดตั้งและการตั้งค่า
1. การตรวจสอบก่อนการติดตั้ง
- ตรวจสอบความเข้ากันได้ของทีวี:
For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
- ระบุประเภทผนัง: This mount is designed for installation on single wood studs, solid concrete, or brick walls. ห้ามติดตั้งบนผนัง drywall เพียงอย่างเดียว
- Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.
2. การติดตั้งขาตั้งทีวีเข้ากับทีวี
- วางทีวีคว่ำหน้าลงบนพื้นผิวที่นุ่มและสะอาดอย่างระมัดระวัง
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.
3. การติดตั้งแผ่นยึดผนัง
- Determine the desired height for your TV. Mark the drilling locations on the wall.
- สำหรับการติดตั้งแกนไม้: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
- สำหรับการติดตั้งผนังคอนกรีต/อิฐ: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.
4. การติดตั้งทีวีเข้ากับแผ่นยึดผนัง
- With an assistant, carefully lift the TV with the attached brackets.
- เกี่ยวขายึดทีวีเข้ากับแผ่นยึดผนัง ตรวจสอบให้แน่ใจว่าทีวีติดตั้งบนขาตั้งอย่างแน่นหนา
- For PSMFK7: ยึดทีวีเข้ากับขาตั้งโดยใช้สกรูนิรภัยหรือกลไกการล็อคที่ให้มา
- For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.

Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.
วิธีการใช้งานขาตั้งทีวี
PSMFK7 Full Motion Mount Adjustments

Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.
- การปรับเอียง: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
- การปรับหมุน: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewมุมอิง
- การยืด/หด: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile ดู.
- การปรับระดับ: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.
PSMTK1 Tilting Mount Adjustments
- การปรับเอียง: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
- กลไกการล็อค: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.
การซ่อมบำรุง
- ตรวจสอบสกรูและน็อตทั้งหมดเป็นระยะ เพื่อให้แน่ใจว่าแน่นและปลอดภัยดี
- ทำความสะอาดฐานยึดด้วยผ้าแห้งเนื้อนุ่ม หลีกเลี่ยงการใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
- Ensure no cables are pinched or stressed by the mount's movement.
การแก้ไขปัญหา
- ทีวีไม่ตั้งตรง: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
- ฐานยึดดูหลวม: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
- Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
- ส่วนที่หายไป: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.
ข้อมูลจำเพาะ
| คุณสมบัติ | ฐานยึดแบบปรับเอียง PSMTK1 | PSMFK7 Full Motion Mount |
|---|---|---|
| ความเข้ากันได้ของขนาดทีวี | 23" - 60" | 26" - 55" |
| ความจุน้ำหนัก | 115 ปอนด์ (52 กก.) | 70 ปอนด์ (31.8 กก.) |
| ความเข้ากันได้ของ VESA | 75x75มม. ถึง 400x400มม. | 100x100มม. ถึง 400x400มม. |
| ประเภทการเคลื่อนไหว | การเอียง | หมุน เอียง ยืดออก |
| มุมเอียง | Adjustable downward tilt | +5° / -15° |
| มุมหมุน | ไม่มีข้อมูล | +/-90° |
| การปรับระดับ | ไม่มีข้อมูล | +/-3° |
| ส่วนต่อเติมจากผนัง | โปรต่ำfile | 3.2" ถึง 19.17" (8.1 ซม. ถึง 48.7 ซม.) |
| วัสดุ | เหล็กอัลลอยด์ | |
| สี | สีดำ | |
| ประเภทการติดตั้ง | ติดผนัง | |
ข้อมูลการรับประกัน
PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webไซต์ โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ
การสนับสนุนลูกค้า
If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.
- Webเว็บไซต์: www.perlesmith.com (ลิงก์สมมติ โปรดเปลี่ยนเป็นลิงก์จริงหากมี)
- อีเมล: support@perlesmith.com (Hypothetical email, please replace with actual if available)
- โทรศัพท์: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)