โซเอลเลอร์ 508-0006

Zoeller 508-0006 12 V Submersible Battery Back-Up Sump Pump System User Manual

รุ่น: 508-0006

บทนำและข้อมูลด้านความปลอดภัย

This manual provides essential instructions for the safe installation, operation, and maintenance of your Zoeller 508-0006 12 V Submersible Battery Back-Up Sump Pump System. Please read this manual thoroughly before attempting to install or operate the pump. Failure to follow these instructions may result in property damage, serious injury, or death.

คำเตือนด้านความปลอดภัยทั่วไป

  • Always disconnect power before servicing the pump or battery.
  • ห้ามใช้งานปั๊มหากสายไฟหรือปลั๊กชำรุด
  • ตรวจสอบให้แน่ใจว่าการเชื่อมต่อไฟฟ้าทั้งหมดดำเนินการโดยช่างไฟฟ้าที่มีคุณสมบัติเหมาะสมและเป็นไปตามกฎหมายท้องถิ่น
  • This pump is designed for clear water only. Do not use for sewage, flammable liquids, or chemicals.
  • ในระหว่างการใช้งาน ควรระวังอย่าให้มือและเท้าอยู่ใกล้ช่องทางเข้าและช่องทางออกของปั๊ม
  • ควรสวมใส่อุปกรณ์ป้องกันส่วนบุคคล (PPE) ที่เหมาะสมระหว่างการติดตั้งและบำรุงรักษา
  • The battery used with this system contains sulfuric acid. Handle with care and follow battery manufacturer's safety guidelines.

สินค้าเกินview และคุณสมบัติ

The Zoeller 508-0006 is a reliable 12-volt DC submersible battery back-up sump pump system designed to activate automatically when your primary AC sump pump fails or during a power outage. It provides an essential layer of flood protection for your basement or crawl space.

Zoeller 508-0006 Battery Back-Up Sump Pump System

Figure 1: Zoeller 508-0006 Battery Back-Up Sump Pump System. This image shows the complete system including the pump, control box, and battery case.

คุณสมบัติหลัก:

  • Integrated Control Box: Features a 10 amp battery recharging system with overcharge protection.
  • ไฟ LED แสดงสถานะ: Clearly display battery power status and float switch activation.
  • เสียงเตือน: Alert you to high water levels, reverse polarity, and low battery conditions.
  • สวิตช์ลูกลอยแนวตั้ง: Solid and buoyant polypropylene design for reliable activation.
  • Durable Battery Case: Constructed from non-corrodible polyethylene.
  • อุปกรณ์เสริมที่รวมอยู่: DC pump discharge check valve, AC pump check valve, tee, and adapter for easy integration.
  • สายไฟ: 6-foot power cord for convenient connection.

การติดตั้งและการตั้งค่า

Proper installation is crucial for the reliable operation of your battery back-up sump pump system. This system is designed to work as a backup to a primary sump pump.

1. Sump Pit Requirements

The sump pit must have a minimum diameter of 18 inches and a minimum depth of 22 inches to accommodate both the primary sump pump and the Zoeller 508-0006 system, including the battery case.

Sump Pit Diagram for Zoeller 508-0006 Installation

Figure 2: Illustrative diagram of a sump pit showing recommended dimensions for primary and backup pump placement.

2. การติดตั้งแบตเตอรี่

  1. Place the battery case (non-corrodible polyethylene) in a suitable location near the sump pit, ensuring it is easily accessible for maintenance.
  2. Insert a 12V deep cycle marine battery (not included) into the battery case. The maximum battery dimensions are 13" L x 7-1/2" W x 9-1/2" H.
  3. Connect the battery cables from the control box to the battery terminals. Ensure correct polarity: red to positive (+), black to negative (-). The system has reverse polarity protection and an alarm.
Battery Connection Diagram for Zoeller 508-0006

Figure 3: Diagram showing proper battery connection to the control box, highlighting positive and negative terminals.

3. Pump and Plumbing Installation

  1. Position the Zoeller 508-0006 pump in the sump pit, ensuring it is below the primary pump's activation level but above the pit floor to prevent debris intake.
  2. Connect the pump's discharge to the included tee fitting. This tee allows both the primary pump and the backup pump to discharge through a common pipe.
  3. Install the included DC pump discharge check valve above the backup pump and the AC pump check valve above the primary pump to prevent backflow.
  4. Secure all plumbing connections to prevent leaks.
Zoeller 508-0006 Plumbing Diagram

Figure 4: Detailed plumbing diagram illustrating the connection of the backup pump, primary pump, check valves, and tee fitting to the discharge line.

4. การเชื่อมต่อไฟฟ้า

Plug the 6-foot power cord from the control box into a standard 120V AC outlet. The control box will begin charging the battery and monitoring the system.

คำแนะนำการใช้งาน

The Zoeller 508-0006 system operates automatically once properly installed and powered.

การทำงานอัตโนมัติ

  • The system continuously monitors the battery charge and the water level in the sump pit.
  • If the water level rises above the primary pump's activation point and reaches the backup pump's float switch, the 12V DC pump will automatically activate and begin pumping water out of the pit.
  • The pump will continue to operate until the water level drops below the float switch's deactivation point.

Control Box Indicators and Alarms

The control box provides visual and audible feedback on the system's status:

  • LED Light (Battery Power): Indicates the current charge level of the battery. Refer to the control box label for specific light patterns and their meanings (e.g., green for charged, yellow for charging, red for low).
  • LED Light (Float Activated): Illuminates when the float switch is engaged and the pump is running.
  • สัญญาณเตือนระดับน้ำสูง: An audible alarm will sound if the water level in the sump pit reaches a critical high point, indicating potential system failure or overwhelming water inflow.
  • สัญญาณเตือนแบตเตอรี่ต่ำ: An audible alarm will sound if the battery charge drops to a critical level, indicating the need for inspection or replacement.
  • สัญญาณเตือนการกลับขั้ว: An audible alarm will sound if the battery is connected incorrectly (positive to negative, negative to positive). Correct the connections immediately.

การซ่อมบำรุง

Regular maintenance ensures the longevity and reliability of your Zoeller 508-0006 system.

การตรวจสอบรายเดือน:

  1. การดำเนินการทดสอบ: Manually lift the float switch to activate the pump. Ensure the pump runs smoothly, discharges water, and the float activated LED illuminates.
  2. การตรวจสอบแบตเตอรี่: Check the battery terminals for corrosion. Clean if necessary. Verify the battery fluid levels (if applicable for your battery type) and top off with distilled water if needed.
  3. Sump Pit Cleanliness: Inspect the sump pit for debris, dirt, or sediment that could obstruct the pump or float switch. Remove any obstructions.
  4. ตรวจสอบวาล์ว: Ensure both the DC and AC pump check valves are functioning correctly and not leaking.

การตรวจสอบประจำปี:

  • การเปลี่ยนแบตเตอรี่: Batteries typically last 3-5 years. Consider replacing your deep cycle marine battery every 3-5 years, or sooner if performance degrades.
  • การตรวจสอบระบบ: Visually inspect all components for wear, damage, or loose connections.

การแก้ไขปัญหา

This section provides solutions to common issues you might encounter with your Zoeller 508-0006 system.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Pump does not run when float is activated.
  • แบตเตอรี่เหลือน้อยหรือหมด
  • การเชื่อมต่อแบตเตอรี่หลวม
  • Reverse polarity connection (alarm sounding).
  • สวิตช์ลูกลอยอุดตันหรือชำรุด
  • มอเตอร์ปั๊มล้มเหลว
  • Check battery charge via LED indicator. Recharge or replace battery.
  • ขันขั้วแบตเตอรี่ให้แน่น
  • Correct battery cable connections (red to +, black to -).
  • Clear any obstructions around the float switch. Test float switch for proper movement.
  • Contact Zoeller support for pump inspection/replacement.
Low Battery Alarm sounds.
  • แบตเตอรี่ต้องการการชาร์จ
  • Battery is old or faulty.
  • Control box not receiving AC power.
  • Allow time for the control box to recharge the battery.
  • Test battery with a multimeter; replace if necessary.
  • Check AC power outlet and control box power cord connection.
High Water Alarm sounds.
  • Backup pump not activating.
  • Backup pump unable to keep up with inflow.
  • Primary pump failure.
  • Refer to "Pump does not run" troubleshooting.
  • Check for blockages in discharge line. Ensure pump is not air-locked.
  • Inspect primary sump pump for operation.
ปั๊มทำงานต่อเนื่อง
  • Float switch stuck in the "up" position.
  • Check valve failure (allowing water to flow back).
  • Clear any obstructions around the float switch.
  • Inspect and replace faulty check valves.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่น508-0006
เล่มที่tageกระแสตรง 12 โวลต์
Material (Pump/Float)โพลิโพรพิลีน (PP)
Material (Battery Case)Non-corrodible Polyethylene
น้ำหนักสินค้า17 Pounds (pump only, without battery)
ความยาวสายไฟ6 ฟุต
Maximum Battery Dimensions (L x W x H)13" x 7-1/2" x 9-1/2"
Minimum Sump Pit Diameter18 นิ้ว
Minimum Sump Pit Depth22 นิ้ว
GPM @ 5 feet head39 GPM
GPM @ 10 feet head30 GPM
GPM @ 15 feet head20 GPM
GPM @ 20 feet head6 GPM
GPM @ 22 feet headปิด

การรับประกันและการสนับสนุน

The Zoeller 508-0006 12 V Submersible Battery Back-Up Sump Pump System is covered under Zoeller's 3-year warranty. This warranty covers defects in materials and workmanship under normal use and service.

For warranty claims, technical assistance, or to purchase replacement parts, please contact Zoeller customer support. Keep your proof of purchase for warranty validation.

ข้อมูลติดต่อบริษัท Zoeller:
Please refer to the official Zoeller webตรวจสอบข้อมูลติดต่อล่าสุดได้จากเว็บไซต์หรือบรรจุภัณฑ์ของผลิตภัณฑ์

© 2023 Zoeller Company. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.