Wave Armored Trooper Votoms Snapping Turtle ST Ver. 1/35 Scale Model Kit

1. บทนำ

ขอบคุณสำหรับการซื้อasing the Wave Armored Trooper Votoms Snapping Turtle ST Ver. 1/35 Scale Model Kit. This manual provides essential information for the assembly, operation, and maintenance of your model kit. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

2. สินค้าหมดview

The Snapping Turtle ST Version is a 1/35 scale plastic model kit from the Armored Trooper Votoms series. This kit features a snap-fit design, eliminating the need for adhesives during assembly. It incorporates polycaps at each joint, allowing for a fully movable and poseable finished model. The ST version emphasizes ease of assembly while accurately reproducing the distinctive appearance of the Blue AT.

รูปที่ 2.1 : ด้านหน้า view of the assembled Snapping Turtle ST model kit.

3. ข้อมูลด้านความปลอดภัย

• This product is a plastic model kit intended for users aged 15 and above.
• Small parts are included. Keep out of reach of small children to prevent choking hazards.
• Assembly may involve sharp tools. Exercise caution to avoid injury.
• Always work in a well-ventilated area if using paints or glues (though not included, these may be used by the builder).

4. เนื้อหาบรรจุภัณฑ์

The following items are included in your Wave Armored Trooper Votoms Snapping Turtle ST Ver. 1/35 Scale Model Kit:

• Plastic assembly kit parts (color-coded)
• Marking stickers
• คู่มือการใช้งาน (เอกสารนี้)

Items NOT included (required for assembly and finishing):

• Plastic model nippers/cutters
• มีดงานอดิเรก
• Files or sanding sticks
• Plastic model cement (adhesives are not required for snap-fit assembly but may be used for added durability)
• Paints and brushes (for painting the model)

5. การติดตั้งและการประกอบ

Follow the detailed diagrams and instructions provided in the included assembly guide. The kit is designed for snap-fit assembly, meaning parts can be connected without glue. However, for a more secure fit, plastic model cement can be used on non-articulated parts.

1. การตระเตรียม: Carefully remove all parts from the runners using nippers. Trim any excess plastic (nubs) with a hobby knife or file เพื่อผิวที่สะอาดหมดจด
2. การประกอบตัวถัง: Begin by assembling the torso, head, and backpack components. Pay attention to the orientation of each piece.
3. การประกอบแขน: Assemble the shoulder, bicep, forearm, and hand parts. Insert polycaps into the designated joint areas to ensure articulation.
4. การประกอบขา: Assemble the thigh, knee, lower leg, and foot parts. Ensure polycaps are correctly placed for full range of motion.
5. การประกอบอาวุธ: Assemble the included weapon. The weapon can be held by the model's hand or attached to specific hardpoints.
6. การประกอบขั้นสุดท้าย: Connect all assembled sections (arms, legs, head, weapon) to the main body.
7. สติ๊กเกอร์/สติ๊กเกอร์ติดรถ: Apply the included marking stickers according to the guide for added detail.

Figure 5.1: Snapping Turtle ST with weapon attached to arm.

Figure 5.2: Detail of the model's primary weapon.

Figure 5.3: Detail of the leg mechanism, featuring the 'Swampy Crag' gimmick.

6. การใช้งาน (การจัดท่าทางและการแสดงผล)

The Snapping Turtle ST model features fully articulated joints thanks to its polycap construction. This allows for a wide range of dynamic poses. Carefully manipulate the joints to achieve desired stances. Avoid excessive force to prevent damage to the plastic parts or polycaps.

• การเคลื่อนไหวร่วมกัน: Gently bend and rotate joints to pose the model.
• Weapon Posing: The weapon can be held in the model's hand or attached to designated hardpoints on the arm.
• ความเสถียร: Ensure the model is balanced when posing to prevent it from falling.

7. การบำรุงรักษา

เพื่อให้โมเดลของคุณมีอายุการใช้งานยาวนานและคงสภาพสวยงาม โปรดปฏิบัติตามคำแนะนำในการบำรุงรักษาเหล่านี้:

• การทำความสะอาด: Dust the model regularly with a soft brush or compressed air to prevent dust buildup. Avoid using harsh chemicals or abrasive materials.
• พื้นที่จัดเก็บ: เก็บโมเดลไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงและอุณหภูมิที่สูงหรือต่ำเกินไป ซึ่งอาจทำให้พลาสติกเสื่อมสภาพหรือเปลี่ยนสีได้
• การจัดการ: Handle the model by its sturdy parts, avoiding delicate antennas or small protrusions.

8 การแก้ไขปัญหา

While this model kit is designed for ease of assembly, you may encounter minor issues. Here are some common troubleshooting tips:

• ชิ้นส่วนไม่พอดี: Ensure parts are correctly oriented. If a part is too tight, gently sand down the peg or hole slightly. Do not force parts together.
• ข้อต่อหลวม: If a joint feels too loose, a thin layer of clear nail polish or hobby cement applied to the polycap or peg and allowed to dry can increase friction.
• ชิ้นส่วนที่ชำรุด: Small breaks can often be repaired with plastic model cement. For larger breaks, consider using epoxy glue or contacting the manufacturer for replacement parts if available.

9. ข้อมูลจำเพาะ

10. การรับประกันและการสนับสนุน

Specific warranty information for this product is not provided in the general product details. For any inquiries regarding missing parts, defects, or technical support, please contact the manufacturer, Wave, directly through their official customer service channels. Please retain your proof of purchase.