Gebildet DC 24V 19mm Waterproof Red LED Flash Alarm Buzzer Instruction Manual

1. บทนำ

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Gebildet DC 24V 19mm Waterproof Red LED Flash Alarm Buzzer. This indicator light with an integrated buzzer is designed for various applications, including electrical control panels and DIY projects, to provide visual and audible alerts regarding equipment status.

2. ข้อมูลด้านความปลอดภัย

Please read and understand all safety instructions before installing or operating this device. Failure to do so may result in injury or damage to the product.

• ตรวจสอบให้แน่ใจว่าแหล่งจ่ายไฟตรงกับปริมาตรที่กำหนดtage (DC 24V) of the device.
• Disconnect power before installation or maintenance to prevent electrical shock.
• Do not exceed the rated current (20~25mA).
• Install in an environment within the specified operating temperature range (-30℃ to +85℃).
• Ensure proper wiring connections to avoid short circuits or malfunction.
• This product is waterproof (IP65), but ensure the mounting area is sealed correctly to maintain its rating.

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

• 2 x 19mm Waterproof Flash Buzzer units

4. คุณสมบัติ

• Integrated Alert System: Combines a red LED flash alarm with an intermittent buzzer for clear visual and audible indications.
• โครงสร้างทนทาน: Made from SUS304 stainless steel, ensuring longevity and resistance to corrosion.
• การออกแบบกันน้ำ: IP65 waterproof rating allows for use in outdoor and demanding environments.
• High Visibility & Audibility: Red LED provides a bright visual alert, while the buzzer produces 90-110dB sound.
• อายุการใช้งานยาวนาน: LED life rated at 100,000 hours.
• ติดตั้งง่าย: Features screw terminal wiring for secure connections.
• การประยุกต์ใช้ที่กว้าง: Suitable for ships, machine tools, electrical control panels (HVAC, electrical panels), and DIY projects.

5. ข้อมูลจำเพาะ

6. การตั้งค่าและการติดตั้ง

ปฏิบัติตามขั้นตอนเหล่านี้เพื่อการติดตั้งที่ถูกต้อง:

1. เตรียมรูสำหรับติดตั้ง: Drill a mounting hole with a diameter of 19mm to 19.5mm in your control panel or desired surface.
2. Insert Buzzer: Insert the buzzer unit into the prepared hole from the front of the panel.
3. Secure with Nut: Thread the securing nut onto the back of the buzzer and tighten it to a torque of 5~15Nm. Ensure it is snug but do not overtighten.
4. การเดินสายไฟ: Connect the DC 24V power supply to the screw terminals on the back of the buzzer. Ensure correct polarity (positive to positive, negative to negative) as indicated on the unit or in the wiring diagram (if provided separately). The LED and buzzer are designed to operate together when power is applied.

รูปที่ 6.1 : ด้านหน้า view of two Gebildet 19mm LED Flash Alarm Buzzers, showing the stainless steel housing and the LED indicator area.

รูปที่ 6.2: ด้านหลัง view of two Gebildet 19mm LED Flash Alarm Buzzers, highlighting the blue plastic housing and screw terminals for wiring connections.

Figure 6.3: Dimensional diagram of the 19mm LED Flash Alarm Buzzer, indicating key measurements for installation, including the 19mm mounting hole diameter.

7. คู่มือการใช้งาน

The Gebildet DC 24V 19mm Waterproof Red LED Flash Alarm Buzzer operates automatically when power is supplied to its terminals. When activated, the integrated red LED will flash, and the buzzer will emit an intermittent sound.

• การเปิดใช้งาน: Connect the device to a stable DC 24V power source. The LED will begin flashing and the buzzer will sound intermittently.
• การปิดใช้งาน: Disconnect the power source to turn off the LED and buzzer.
• วัตถุประสงค์: This device is intended to serve as an indicator for operational status, warnings, or alarms in electrical circuits and machinery.

8. การบำรุงรักษา

The Gebildet LED Flash Alarm Buzzer is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.

• การทำความสะอาด: Periodically wipe the stainless steel surface with a soft, damp cloth to remove dust or grime. Avoid abrasive cleaners.
• การตรวจสอบ: Routinely inspect wiring connections to ensure they remain secure. Check for any signs of corrosion or damage to the housing.
• สภาพแวดล้อม : While IP65 rated, prolonged exposure to extreme conditions outside the specified operating temperature range may affect performance.

9 การแก้ไขปัญหา

If you encounter issues with your LED Flash Alarm Buzzer, refer to the following common problems and solutions:

10. การรับประกันและการสนับสนุน

This product is manufactured by Gebildet. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Standard return policies typically allow for returns within 30 days of purchase for refund or replacement.

For further assistance, please refer to the contact information provided by your point of purchase or visit the official Gebildet webเว็บไซต์.