1. บทนำ
This manual provides essential information for the safe assembly, operation, and maintenance of your Fms 1700MM Piper PA-18 Super CUB remote control airplane. Please read this manual thoroughly before operating the aircraft to ensure proper function and safety.
The Fms 1700mm PA-18 Super Cub is a Plug and Play (PNP) model, meaning it comes pre-installed with ESC, motor, and servos. A transmitter, receiver, battery, and charger are NOT included and must be purchased separately.
2. ข้อมูลด้านความปลอดภัย
Operating a remote control aircraft requires caution and adherence to safety guidelines. Failure to do so may result in injury or property damage.
- Always operate your RC plane in open areas, away from people, buildings, and other obstacles.
- Ensure all batteries are fully charged and properly installed before each flight.
- Perform pre-flight checks on all control surfaces and radio connections.
- ห้ามบินใกล้สนามบินหรือเขตห้ามบินเด็ดขาด
- หลีกเลี่ยงการบินในช่วงที่มีลมแรงหรือสภาพอากาศเลวร้าย
- ควรเก็บมือและเสื้อผ้าที่หลวมให้ห่างจากใบพัดขณะที่เครื่องยนต์กำลังทำงาน
- Adult supervision is recommended for operators under 14 years of age.
3. เนื้อหาบรรจุภัณฑ์
The Fms 1700MM Piper PA-18 Super CUB PNP package includes:
- Pre-assembled fuselage with motor, ESC, and servos installed.
- Main wing halves with integrated servo connectors.
- Horizontal and vertical stabilizers.
- Landing gear with 6.25-inch oversized balloon tires.
- Propeller and spinner.
- Wing struts.
- Small parts bag (screws, plastic retainers, pushrods).
- คู่มือการใช้งาน
Note: Transmitter, receiver, flight battery, and charger are not included.
4. การติดตั้งและการประกอบ
Follow these steps for quick and glue-free assembly:
4.1 การติดตั้งล้อลงจอด
With the fuselage inverted, insert the landing gear into the designated slots. Secure the landing gear using the included screws and plastic retainers. Attach the springs to the landing gear assembly for proper suspension.
4.2 Wing Assembly
Insert the wing spar into the pass-through on the fuselage. Carefully slide both wing halves onto the wing spar, ensuring the integrated servo connectors align and seat properly. Secure the wing halves and wing struts using the included screws and wing bolts.
4.3 Horizontal Stabilizer Installation
Insert the horizontal stabilizer spat into the pass-through on the fuselage. Insert both halves of the horizontal stabilizer onto the spat. Use the included bolts to secure the horizontal stabilizer.
4.4 Control Surface Connections
With the elevator servo centered, connect the pushrod to the control horn on the elevator. Repeat for other control surfaces (ailerons, rudder) as necessary. The ball-link pushrods ensure increased precision.
4.5 การติดตั้งใบพัด
Install the propeller and spinner in the order shown in the diagram (refer to the physical manual for detailed diagram). Ensure it is securely fastened.
4.6 การติดตั้งแบตเตอรี่
The aircraft features an oversized battery compartment. Insert your recommended 14.8V 2200-2600mAh 35C LiPo battery (not included) into the compartment and secure it with the provided strap (if any) to prevent shifting during flight.
5. คู่มือการใช้งาน
5.1 การตรวจสอบก่อนบิน
- Verify all control surfaces move freely and correctly in response to transmitter inputs.
- Check battery charge level on both the aircraft and transmitter.
- ตรวจสอบให้แน่ใจว่าใบพัดติดตั้งแน่นหนาและไม่มีความเสียหาย
- Confirm the Reflex V2 system is correctly configured for your desired flight mode.
5.2 ขึ้นเครื่อง
The 1700mm PA-18 Super Cub is known for its Short Takeoff and Landing (STOL) capability, achieving takeoff heights of less than 3 meters/10 feet. Position the aircraft into the wind, gradually increase throttle, and apply slight elevator input as speed builds to lift off.
5.3 เที่ยวบิน
The aircraft offers excellent flight characteristics. Use gentle control inputs for smooth flight. For advanced maneuvers, ensure you are in the appropriate Reflex V2 mode.
5.4 ลงจอด
Approach the landing area into the wind. Reduce throttle and maintain a controlled descent. Apply slight elevator input just before touchdown for a smooth landing. The CNC metal landing gear and oversized tires are designed for perfect landings on various terrains.
6. Reflex V2 Flight Controller System
The Reflex V2 is a user-upgradeable flight controller compatible with most FMS aircraft. It can be reprogrammed easily with different model files via a simple software interface. It offers three flight modes:
- Stabilized Mode: Designed for beginners. Reflex will rapidly level the aircraft from any attitude when this mode is activated. It combines accelerometer and gyro data to determine how to level the aircraft when the control sticks are released, providing peace of mind. The aircraft will maintain level flight with 50-60% throttle and climb under full throttle.
- Optimized Mode: Utilizing advanced solid-state gyros, the Reflex system maintains aircraft attitude by counteracting inflight upsets, such as gusts or crosswinds. With Reflex, even small aircraft will fly with confidence, similar to much larger models.
- โหมดปิด: This turns off all gyro functionality. The aircraft is flown completely manually.
These modes are controlled with a two or three-position switch on your transmitter. When assigned to a two-position switch, the Reflex system changes between stabilized and optimized modes.
7. การบำรุงรักษา
- Regularly inspect all components for damage, especially after hard landings.
- Check propeller for cracks or chips and replace if damaged.
- Ensure all screws and connections are tight.
- Keep the aircraft clean and free from dirt and debris.
- Store the aircraft in a cool, dry place away from direct sunlight.
8 การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| เครื่องบินไม่ตอบสนองต่อการควบคุม | Low battery on transmitter or aircraft; receiver not bound; loose connections. | Charge batteries; re-bind receiver; check all wiring. |
| Aircraft flies erratically. | Incorrect control surface trim; damaged control surface; Reflex V2 settings. | Adjust trim; inspect and repair damage; check Reflex V2 mode. |
| มอเตอร์ไม่หมุน | ESC not armed; motor or ESC failure; loose connections. | Ensure throttle is at zero and arm ESC; check connections; replace faulty components. |
9. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ปีกกว้าง | 1700มม. / 66.9นิ้ว |
| ความยาวรวม | 1136มม. / 44.7นิ้ว |
| น้ำหนักการบิน | ~2100กรัม |
| ขนาดมอเตอร์ | 3541-KV750 Outrunner |
| เอสซีเอส | 45A Predator |
| เซอร์โว | 17กx6 |
| ช่องวิทยุ | 6 Channel (minimum) |
| แบตเตอรี่ที่แนะนำ | 14.8V 2200-2600mAh 35C |
| ระยะเวลาบินโดยประมาณ | 4-6 นาที |
| ระดับประสบการณ์ | ระดับกลาง |
| เวลาประกอบ | ประมาณ 40 นาที |
| แฟลป | ใช่ |
| หดกลับ | เลขที่ |
| CG (From leading edge) | 80-85มม. |
| ขนาดของ Prop | 12*7.5, 2 ใบมีด |
| โหลดปีก | 50g/dm² / 0.11oz/in² |
| บริเวณปีก | 42dm² / 651sq.in |
10. คุณสมบัติเพิ่มเติม
- Pre-installed navigation and landing lights for enhanced visibility and realism.
- Robust two-bladed Nylon propellers.
11. วิดีโอผลิตภัณฑ์อย่างเป็นทางการ
FMS 1700mm(67") Piper PA-18 Super Cub - Features
Video Description: This video showcases the key features and design elements of the FMS 1700mm Piper PA-18 Super Cub RC plane, highlighting its construction and capabilities.
1700mm Piper PA-18 Super Cub
Video Description: A comprehensive video demonstrating the FMS 1700mm Piper PA-18 Super Cub in action, including flight maneuvers and showcasinก. ประสิทธิภาพการทำงานของมัน
12. การรับประกันและการสนับสนุน
For warranty claims or technical support, please contact Fms customer service. Keep your purchase receipt as proof of purchase.
Fms guarantees their models. If you encounter any issues, please reach out to the seller or Fms directly for assistance.
หากต้องการข้อมูลเพิ่มเติม โปรดเยี่ยมชม ร้าน FMS บน Amazon.
