Daytech Panic Button Alarm System User Manual

1. บทนำ

The Daytech Panic Button Alarm System is designed to provide immediate alert capabilities for various security needs, including home care, business security, and emergency situations. This system features a loud 120dB siren with a flashing strobe light, activated by wireless panic buttons or remote controls. It is suitable for indoor and outdoor use, offering reliable performance with a built-in battery for power outagการป้องกันอี

2. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่ามีส่วนประกอบทั้งหมดอยู่ในแพ็คเกจของคุณ:

• 1 x Strobe Siren Alarm Receiver
• 5 x Remote Panic Buttons
• 2 x Call Buttons (Square type)
• Power Adapter for Siren
• ฮาร์ดแวร์สำหรับติดตั้ง (สกรู, พุก)
• คู่มือการใช้งาน (เอกสารนี้)

ภาพ: เหนือview of the Daytech Panic Button Alarm System components, showing the siren, a square call button, and a remote control.

3. คุณสมบัติหลัก

• Wireless Outdoor/Indoor Siren: Produces a 120dB sound and flashing strobe light upon activation.
• ระยะขยาย: Call buttons and receiver operate up to 330 feet in open areas, 130 feet with obstacles. Remote controls have an operating range of 65 feet to the receiver.
• พลัง Outagการป้องกันอี: Features a built-in battery providing approximately 10 hours of standby time, ensuring continuous operation during power interruptions.
• Waterproof Panic Button: The panic buttons are waterproof, allowing installation in areas like washing rooms or near bedsides.
• Cancel/OFF Function: Allows users to deactivate the alarm using a dedicated cancel button on the call unit or the OFF button on the remote.
• ตั้งค่าได้ง่าย: Units are pre-paired from the factory for immediate use.
• ระบบที่ขยายได้: One siren can be paired with up to 8 transmitters (including call buttons and remote controls).

4. คำแนะนำในการตั้งค่า

4.1 การเพิ่มพลังเริ่มต้น

1. แกะส่วนประกอบทั้งหมดออกจากกล่อง
2. Plug the siren alarm receiver into a standard electrical outlet. The unit will emit a short sound to indicate it is powered on.
3. The system is pre-paired for immediate use. Test the system by pressing a panic button or remote to ensure the siren activates.

Image: The Daytech siren alarm plugged into a wall outlet, indicating power connection.

4.2 Pairing Additional Transmitters (Call Buttons/Remotes)

The siren can be paired with up to 8 transmitters. Follow these steps to pair new devices:

1. Locate the "Set Button" on the back of the siren receiver.
2. Press and hold the "Set Button" until the siren emits a short beep, indicating it is in pairing mode.
3. Within 10 seconds, press the "CALL" button on the new call button or the "ON" button on the new remote control.
4. The siren will emit another beep to confirm successful pairing.
5. Repeat for any additional transmitters.
6. To exit pairing mode, wait 10 seconds without pressing any transmitter, or press the "Set Button" again.

Image: Close-up of the back of the siren unit, highlighting the "Set Button" for pairing.

4.3 Mounting the Call Buttons

The call buttons can be fixed to a wall or placed on a flat surface.

• For wall mounting, use the provided screws and anchors. Ensure the button is easily accessible in an emergency.
• The waterproof design allows installation in bathrooms or other areas where moisture may be present.

Image: A panic button being tested with water spray, demonstrating its waterproof feature.

5. คู่มือการใช้งาน

5.1 การเปิดใช้งานสัญญาณเตือนภัย

• Using a Call Button: Press the large "CALL" button on the square call unit. This will send a signal to the siren, activating the alarm sound and flashing lights.
• Using a Remote Control: Press the "ON" button on the remote control. This will activate the siren.

Image: A hand pressing the call button, illustrating alarm activation.

5.2 Deactivating the Alarm

• Using a Call Button: Press the small "CANCEL" button on the square call unit. This will silence the siren.
• Using a Remote Control: Press the "OFF" button on the remote control. This will deactivate the siren.

Image: A hand pressing the "OFF" key on a remote control to cancel the alarm.

5.3 พลังงาน Outage Functionality

The siren receiver includes a built-in battery that provides approximately 10 hours of standby power. In the event of a power outage, the system will automatically switch to battery power, ensuring continued operation.

Image: Illustration showing the siren alarm operating on its built-in battery during a power outage, with a 10-hour standby time.

6. การบำรุงรักษา

6.1 Battery Renewal for Call Units

The call units (panic buttons) are powered by a 1*23A 12V battery. When the battery is low, the unit's performance may degrade.

1. Carefully open the call unit casing using a small flat-head screwdriver or similar tool.
2. Remove the old 1*23A 12V battery.
3. Insert a new 1*23A 12V battery, ensuring correct polarity.
4. ปิด casinก. อย่างปลอดภัย

Image: Diagram illustrating the internal components of the call button and the 1*23A 12V battery.

6.2 การทำความสะอาด

Wipe the surfaces of the siren and transmitters with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7 การแก้ไขปัญหา

8. ข้อมูลจำเพาะ

• ยี่ห้อ: เดย์เทค
• หมายเลขรุ่น: Model 1 (JH003 8-2)
• แหล่งพลังงาน: Battery Powered (Siren has built-in battery for backup)
• วิธีการควบคุม: ระยะไกล
• ระดับเสียง: 120 เดซิเบล
• Maximum Range (Call Button to Siren): 330 Feet (open areas), 130 Feet (with obstacles)
• Maximum Range (Remote to Siren): 65 ฟุต
• ประเภทการติดตั้ง: Door Mount (for siren), Wall Mount/Surface (for call buttons)
• ยูพีซี: 762102193270

Image: Detailed diagram showing the dimensions and key features of the siren, call button, and remote control.

9. การรับประกันและการสนับสนุน

Daytech products are covered by a manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the contact information provided with your purchase or visit the official Daytech webเว็บไซต์.

ผู้ผลิต: Daytech co.,Ltd.