ฮามะ 00118498

Hama 00118498 Monitor Desk Mount Instruction Manual

รุ่น : 00118498

การแนะนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your Hama 00118498 Monitor Desk Mount. Designed to enhance your ergonomic workspace, this monitor arm allows for flexible positioning of your display, promoting a comfortable and productive environment. Please read these instructions carefully before beginning installation.

คำแนะนำการตั้งค่า

Follow these steps to correctly install your Hama 00118498 Monitor Desk Mount.

1. Attaching the Desk Clamp

  1. วางโต๊ะทำงานclamp assembly onto the edge of your desk. Ensure the desk surface is sturdy and can support the weight of the mount and your monitor.
  2. ขันสกรูให้แน่นamp screw firmly until the mount is securely fastened to the desk. Do not overtighten.
Close-up of the Hama monitor arm desk clamp กลไก

ภาพ: โต๊ะทำงานamp mechanism, showing how it attaches to the desk edge for secure mounting.

2. การติดตั้งจอภาพ

  1. Ensure your monitor is VESA compatible (100x100mm or 75x75mm).
  2. Carefully attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Make sure the screws are tightened securely.
  3. Slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism provided.
Hama monitor arm showing the VESA plate and adjustable joint

Image: The monitor arm's VESA plate and adjustable joint, ready for monitor attachment.

ด้านข้าง view of the Hama monitor arm with cable management and VESA mount

ภาพ: ด้านหนึ่ง view of the assembled monitor arm, highlighting the VESA mount and integrated cable management channels.

3. การจัดการสายเคเบิล

Utilize the integrated cable management system to route your monitor cables neatly along the arm. This helps maintain a tidy workspace and prevents cable clutter.

คำแนะนำการใช้งาน

The Hama 00118498 Monitor Desk Mount offers various adjustment options for optimal viewความสะดวกสบาย

  • การปรับความสูง: The integrated pneumatic spring allows for smooth and effortless vertical height adjustment. Gently push or pull the monitor to your desired height.
  • หมุน: The arm can swivel horizontally, allowing you to rotate your monitor to share your screen or change your viewมุมอิง
  • เอียง: Adjust the monitor's tilt angle (up or down) to reduce glare and find the most comfortable viewตำแหน่งการวางตำแหน่ง
  • การหมุน: Rotate your monitor from landscape to portrait orientation as needed for different tasks.

Adjustments should be smooth. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

การซ่อมบำรุง

การบำรุงรักษาอย่างสม่ำเสมอจะช่วยให้ขาตั้งจอภาพของคุณมีอายุการใช้งานยาวนานและทำงานได้อย่างมีประสิทธิภาพสูงสุด

  • การทำความสะอาด: Wipe the surface of the monitor arm with a soft, damp ผ้า. หลีกเลี่ยงการใช้น้ำยาทำความสะอาดหรือตัวทำละลายที่มีฤทธิ์กัดกร่อน
  • ตรวจสอบการเชื่อมต่อ: ตรวจสอบสกรูและจุดเชื่อมต่อทั้งหมดเป็นระยะ เพื่อให้แน่ใจว่ายังแน่นและปลอดภัยดี ขันให้แน่นอีกครั้งหากจำเป็น
  • การหล่อลื่น: The pneumatic spring is maintenance-free. Do not attempt to lubricate internal components.

การแก้ไขปัญหา

If you encounter issues with your Hama 00118498 Monitor Desk Mount, refer to the following common problems and solutions:

  • จอภาพแสดงอาการหย่อนคล้อยหรือไม่สามารถคงตำแหน่งได้: The tension of the pneumatic spring may need adjustment. Locate the tension adjustment screw (usually found on the arm joint) and turn it clockwise to increase tension for heavier monitors, or counter-clockwise for lighter monitors. Adjust gradually until the monitor holds its position.
  • จอภาพเคลื่อนย้ายยาก: If the arm is too stiff, the tension may be too high. Turn the tension adjustment screw counter-clockwise to decrease tension.
  • Arm Feels Loose on Desk: ให้แน่ใจว่าโต๊ะสะอาดamp is fully tightened. If the desk surface is too thin or fragile, consider adding a protective pad between the clamp and the desk.
  • จอภาพสั่น: Check all mounting screws on the VESA plate and the arm joints to ensure they are securely fastened.

ข้อมูลจำเพาะ

คุณสมบัติ รายละเอียด
หมายเลขรุ่น 00118498
ประเภทการติดตั้ง โต๊ะ Clamp
ประเภทการเคลื่อนไหว Rotating, Swivel, Tilt, Height Adjustable (Pneumatic Spring)
ยี่ห้อ ฮามะ
วัสดุ อลูมิเนียม
สี สีดำ
อุปกรณ์ที่รองรับ เฝ้าสังเกต
ขนาดขั้นต่ำที่เข้ากันได้ 10 นิ้ว
ขนาดที่เข้ากันได้สูงสุด 32 นิ้ว
น้ำหนักสินค้า 2.2 กิโลกรัม
ประเทศต้นกำเนิด จีน

การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Hama webเว็บไซต์นี้โดยทั่วไปคุณจะพบรายละเอียดการติดต่อฝ่ายสนับสนุน คำถามที่พบบ่อย และแหล่งข้อมูลเพิ่มเติมได้ที่นั่น

ฮามาอย่างเป็นทางการ Webเว็บไซต์: www.hama.com

© 2023 ฮามา สงวนลิขสิทธิ์ทุกประการ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.