1. บทนำ
This manual provides detailed instructions for the installation, operation, and maintenance of your Hertz SPL Show Series Bundle, which includes one pair of ST 25A NEO Compression Tweeters and one pair of SV 165 NEO 6.5" Midrange Drivers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to maximize the performance and longevity of your audio components.
2. ข้อมูลด้านความปลอดภัย
ปฏิบัติตามข้อควรระวังเพื่อความปลอดภัยต่อไปนี้เสมอ:
- แนะนำการติดตั้งอย่างมืออาชีพ: Due to the complexity of car audio systems, professional installation is highly recommended. Incorrect installation can lead to damage to the product, vehicle, or personal injury.
- การตัดการเชื่อมต่อไฟฟ้า: Before any installation or wiring, disconnect the vehicle's battery to prevent electrical shorts and damage.
- การเดินสายไฟ: ตรวจสอบให้แน่ใจว่าสายไฟทั้งหมดถูกจัดวางและยึดอย่างถูกต้องเพื่อป้องกันการหนีบ การเสียดสี หรือการลัดวงจร ใช้สายไฟที่มีขนาดเหมาะสมสำหรับการเชื่อมต่อไฟเลี้ยงและลำโพง
- การระบายอากาศ : Ensure adequate ventilation around the speakers to prevent overheating, especially during prolonged high-power operation.
- ระดับเสียง: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Operate your audio system responsibly.
- สภาพแวดล้อม : While these components feature waterproofing and anti-UV treatment, avoid direct exposure to extreme elements where possible to extend product life.
3. เนื้อหาบรรจุภัณฑ์
ตรวจสอบว่ามีสินค้าทั้งหมดที่ระบุไว้ด้านล่างอยู่ในแพ็คเกจของคุณ:
- One Pair (2x) Hertz SPL Show Series ST 25A NEO 1" High Efficiency Compression Tweeters
- One Pair (2x) Hertz SPL Show Series SV 165 NEO 6.5" 4-Ohm SPL Midrange Speaker Drivers
- Installation Accessories (e.g., mounting hardware, wiring terminals - specific items may vary)
- คู่มือการใช้งาน (เอกสารนี้)

Image 3.1: Contents of the Hertz SPL Show Series Bundle, including two midrange drivers, two compression tweeters, a pry tool kit, and a coozy.
4. สินค้าหมดview
4.1. Hertz SPL Show Series ST 25A NEO Compression Tweeters
The ST 25A NEO tweeters are designed for high-efficiency sound reproduction, featuring a powerful Neodymium magnet and a compact size. They are built for robust performance in demanding audio environments.
- แม่เหล็กนีโอไดเมียม: Provides high performance in a compact form factor.
- FEM Optimized: Phase-plug and loading horn are optimized using Finite Element Method for acoustic precision.
- CCAR Voice Coil: Copper Clad Aluminium Ribbon voice coil offers high thermal and mechanical capability, with an easy replacement body kit.
- Aluminium Membrane: Extra-light design to maximize Sound Pressure Level (SPL).
- ความทนทาน: Features body waterproofing and anti-UV treatment for outdoor use without discoloration.

Image 4.1: A pair of Hertz SPL Show Series ST 25A NEO Compression Tweeters. These compact, black tweeters feature a horn-loaded design for high-frequency output.

ภาพที่ 4.2: มุมเอียง view of a single Hertz SPL Show Series ST 25A NEO Compression Tweeter, highlighting its robust construction and horn design.
4.2. Hertz SPL Show Series SV 165 NEO 6.5" Midrange Drivers
The SV 165 NEO midrange drivers are engineered for powerful mid-frequency reproduction, utilizing Neodymium magnets for excellent performance in a compact and lightweight design. They are also built for durability in various environments.
- ขนาดกะทัดรัดและน้ำหนักเบา: Achieved through the use of Neodymium N38 H motor units, preserving performance.
- Waterproofing & Anti-UV: Cones are treated to allow safe outdoor use without discoloration.
- การป้องกันการเกิดออกซิเดชัน: Motor units are treated with cataphoresis, and lead-wires are insulated.
- ความเข้ากันได้: Terminals and mounting holes are designed for installation on Harley-Davidson motorbikes, indicating versatile mounting options.
- วัสดุกรวย: Water-Repellent Pressed Paper.

Image 4.3: A pair of Hertz SPL Show Series SV 165 NEO 6.5-inch Midrange Drivers. These black speakers feature a central "SPL Show" logo and a durable cone.

ภาพที่ 4.4: มุมเอียง view of a single Hertz SPL Show Series SV 165 NEO 6.5-inch Midrange Driver, showing the cone texture and mounting points.
5. การตั้งค่าและการติดตั้ง
การติดตั้งอย่างถูกต้องเป็นสิ่งสำคัญอย่างยิ่งต่อประสิทธิภาพและความปลอดภัยสูงสุด ขอแนะนำอย่างยิ่งให้ดำเนินการติดตั้งโดยผู้เชี่ยวชาญที่มีคุณสมบัติเหมาะสม
5.1. การตรวจสอบก่อนการติดตั้ง
- ความเข้ากันได้ของยานพาหนะ: Ensure the mounting locations in your vehicle can accommodate the dimensions of the SV 165 NEO (6.5") midrange drivers and ST 25A NEO tweeters.
- ความต้องการพลังงาน: ยืนยันของคุณ amplifier can safely power these components. Refer to the specifications section for power handling.
- เครื่องมือ: Gather all necessary tools, including screwdrivers, wire strippers, crimpers, drill, and safety equipment.
5.2. การติดตั้ง
Midrange Drivers (SV 165 NEO):
- ถอดลำโพงเดิมออกอย่างระมัดระวัง หรือเตรียมพื้นที่สำหรับติดตั้งลำโพงให้พร้อม
- Ensure the mounting surface is flat and free of obstructions.
- Position the SV 165 NEO driver and mark the screw holes. Drill pilot holes if necessary, ensuring not to damage any vehicle wiring or components behind the panel.
- Secure the driver using the provided mounting screws. Do not overtighten.
Tweeters (ST 25A NEO):
- Choose a mounting location that allows for optimal sound dispersion and imaging, typically at ear level or slightly above.
- These tweeters can be flush-mounted or surface-mounted depending on the included accessories and desired aesthetic.
- Follow the specific instructions provided with the tweeter mounting hardware for precise installation.
5.3. การเดินสาย
แนวทางการเดินสายไฟทั่วไป:
- Always ensure the vehicle's battery is disconnected before making any electrical connections.
- Connect the positive (+) terminal of the speaker to the positive (+) output of the amplifier/crossover, and the negative (-) terminal to the negative (-) output.
- ควรใช้สายลำโพงคุณภาพสูงที่มีขนาดเหมาะสม เพื่อลดการสูญเสียพลังงานและรับประกันการส่งสัญญาณที่ชัดเจน
- For the ST 25A NEO tweeters, a high-pass filter is required to protect them from low frequencies. The specifications indicate "Hi-pass filtered @ 5 kHz - 12 dB Oct." This means a crossover should be set to filter out frequencies below 5 kHz with a 12 dB per octave slope. Failure to use a proper high-pass filter will damage the tweeters.
- For the SV 165 NEO midrange drivers, a band-pass filter is typically used, allowing frequencies within their operational range (e.g., 150 Hz to 5 kHz) to pass through.
- Secure all wiring to prevent movement, chafing, and potential short circuits.
Warning: Incorrect wiring can damage the speakers and/or amplifier. Consult a professional if unsure.
6. คู่มือการใช้งาน
เมื่อติดตั้งแล้ว ให้ปฏิบัติตามคำแนะนำเหล่านี้เพื่อการทำงานที่เหมาะสมที่สุด:
- การเพิ่มพลังเริ่มต้น: After installation, reconnect the vehicle battery. Turn on your audio system at a low volume level.
- การปรับแต่งระบบ: ปรับแต่งของคุณ amplifier's gain settings, crossover points, and equalization (EQ) to achieve balanced sound. Pay close attention to the crossover settings for the tweeters (high-pass at 5 kHz, 12 dB/oct) and midrange drivers.
- ช่วงเวลาพัก: Allow a break-in period of several hours of normal listening before operating the speakers at high volumes. This allows the speaker components to loosen and perform optimally.
- การควบคุมระดับเสียง: Avoid operating the system at excessively high volumes for extended periods, as this can lead to speaker damage and hearing loss. If you hear distortion, reduce the volume immediately.
7. การบำรุงรักษา
These Hertz SPL Show Series components are designed for durability and require minimal maintenance:
- การทำความสะอาด: Use a soft, dry cloth to gently wipe dust or dirt from the speaker cones and grilles. Avoid using harsh chemicals or abrasive cleaners.
- การตรวจสอบ: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed. Inspect mounting hardware for security.
- การปกป้องสิ่งแวดล้อม: While treated for UV and water resistance, protecting the speakers from prolonged direct sunlight and extreme moisture will extend their lifespan and maintain aesthetic appearance.
8 การแก้ไขปัญหา
If you experience issues with your Hertz SPL Show Series components, refer to the following common problems and solutions:
8.1. ไม่มีเสียงออกจากลำโพง
- ตรวจสอบการเชื่อมต่อ: ตรวจสอบให้แน่ใจว่าสายลำโพงทั้งหมดเชื่อมต่อกับลำโพงและตัวอุปกรณ์อย่างแน่นหนาแล้ว amplifier/head unit. Verify correct polarity (+ to + and - to -).
- Ampสถานะผู้ขยาย: ตรวจสอบว่า ampเครื่องขยายเสียงเปิดอยู่และไม่ได้อยู่ในโหมดป้องกัน
- หน่วยต้นทาง: Confirm the head unit or source is powered on and playing audio.
- ฟิวส์: Check fuses in the amplifier and vehicle's fuse box.
8.2. เสียงผิดเพี้ยนหรือไม่ชัดเจน
- ระดับเสียง: ลดระดับเสียงลง การบิดเบือนของเสียงมักเกิดขึ้นเมื่อ... ampเครื่องขยายเสียงหรือลำโพงถูกโอเวอร์ไดรฟ์
- การตั้งค่าเกน: ปรับแต่ง amplifier's gain settings. Too high a gain can cause clipping and distortion.
- การตั้งค่าครอสโอเวอร์: Verify that the crossover frequencies are correctly set for both tweeters and midrange drivers as per specifications. Incorrect crossover settings can lead to distortion or damage.
- การเดินสายไฟ: Check for loose or shorted speaker wires.
- ความเสียหายของลำโพง: Inspect speaker cones and surrounds for any visible damage.
8.3. One Speaker Not Working
- Individual Connections: Check the wiring for the specific non-working speaker.
- ยอดคงเหลือ/เฟดเดอร์: Ensure the balance and fader settings on your head unit are centered.
- Amplifier Channel: หากใช้ระบบหลายช่องสัญญาณ amplifier, test the output of the specific channel connected to the non-working speaker.
If problems persist after troubleshooting, contact Hertz customer support or a qualified car audio technician.
9. ข้อมูลจำเพาะ
9.1. Hertz SPL Show Series ST 25A NEO Compression Tweeters (Pair)
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ขนาด | 44 มิลลิเมตร (1.8 นิ้ว) |
| การจัดการพลังงาน - สูงสุด | 100 W (Hi-pass filtered @ 5 kHz - 12 dB Oct.) |
| อิมพีแดนซ์ | 4 โอห์ม |
| การตอบสนองความถี่ | 3 kHz ÷ 20 kHz |
| ความไวต่อความรู้สึก | 107 เดซิเบล SPL |
| วอยซ์คอยล์ Ø | 25 มม. (1 นิ้ว) |
| วัสดุแม่เหล็ก | นีโอไดเมียม |
| วัสดุรูปกรวย | อลูมิเนียม |
| วัสดุคอยล์เสียง | CCAR (Copper Clad Aluminium Ribbon) |
| คุณสมบัติพิเศษ | FEM optimized phase-plug and loading horn, Body waterproofing and anti-UV treatment |
9.2. Hertz SPL Show Series SV 165 NEO 6.5" Midrange Speaker Drivers (Pair)
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ขนาด | 165 มิลลิเมตร (6.5 นิ้ว) |
| อิมพีแดนซ์ | 4 โอห์ม |
| วัสดุแม่เหล็ก | Neodymium N38 H |
| วัสดุรูปกรวย | กระดาษอัดกันน้ำ |
| คุณสมบัติพิเศษ | Cones waterproofing and anti-UV treatment, Motor units treated with cataphoresis, Insulated lead-wires, Compatible for Harley-Davidson motorbikes installation |
9.3. ข้อมูลจำเพาะทั่วไปของผลิตภัณฑ์
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| น้ำหนักสินค้า | 3 ปอนด์ |
| ขนาดแพ็คเกจ | 19 x 15 x 9 นิ้ว |
| หมายเลขรุ่น | เฮิร์ตซ์BDL210910-06 |
| ASIN | B09G79LN28 |
| ผู้ผลิต | เฮิรตซ์ |
| วันที่พร้อมใช้งานครั้งแรก | วันที่ 14 กันยายน 2021 |
10. การรับประกันและการสนับสนุน
ข้อมูลการรับประกัน:
This Hertz SPL Show Series Bundle is covered by a การรับประกันจากผู้ผลิต 1 ปีการรับประกันนี้โดยทั่วไปครอบคลุมถึงข้อบกพร่องในวัสดุและฝีมือการผลิตภายใต้การใช้งานปกติ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในการเรียกร้องการรับประกัน
การสนับสนุนลูกค้า:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hertz customer support directly. Refer to the official Hertz webเว็บไซต์หรือเอกสารการซื้อของคุณสำหรับรายละเอียดการติดต่อ
แหล่งข้อมูลออนไลน์:
Additional information, FAQs, and product registration may be available on the official Hertz Brand Store หรือองค์กรของพวกเขา webเว็บไซต์.