โปรเรค PR-122M

PRORECK PR-122M Dual 12-inch Car Subwoofer System

คู่มือการใช้งาน

1. บทนำ

Thank you for choosing the PRORECK PR-122M Complete Car Subwoofer System. This system is designed to provide powerful and clear bass for your vehicle's audio setup. It includes a dual 12-inch subwoofer in a loaded enclosure, a mono block amplifier, and a complete wiring installation kit. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new car audio system.

2. ข้อมูลด้านความปลอดภัย

โปรดอ่านคำแนะนำทั้งหมดอย่างละเอียดก่อนการติดตั้งและการใช้งาน การไม่ปฏิบัติตามคำแนะนำเหล่านี้อาจส่งผลให้ผลิตภัณฑ์ ยานพาหนะ หรือการบาดเจ็บส่วนบุคคลเสียหายได้

  • แนะนำการติดตั้งอย่างมืออาชีพ: หากคุณไม่แน่ใจเกี่ยวกับขั้นตอนการติดตั้งใดๆ โปรดปรึกษาช่างเทคนิคเครื่องเสียงรถยนต์ที่มีคุณสมบัติเหมาะสม
  • ถอดแบตเตอรี่: ควรถอดขั้วแบตเตอรี่ลบของรถออกทุกครั้งก่อนเริ่มงานไฟฟ้าใดๆ เพื่อป้องกันไฟฟ้าลัดวงจร
  • การเดินสายไฟที่ถูกต้อง: Ensure all wiring is correctly routed, secured, and insulated to prevent damage from pinching, abrasion, or heat. Use appropriate gauge wires as specified.
  • การระบายอากาศ : ติดตั้ง ampวางเครื่องขยายเสียงในตำแหน่งที่มีการระบายอากาศเพียงพอเพื่อป้องกันความร้อนสูงเกินไป
  • การติดตั้งที่ปลอดภัย: Securely mount the subwoofer enclosure and amplifier to prevent them from shifting during vehicle movement, which could cause injury or damage.
  • ระดับเสียง: การสัมผัสกับเสียงดังเป็นเวลานานอาจทำให้การได้ยินเสียหายได้ โปรดปรับระดับเสียงอย่างเหมาะสม

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

  • PRORECK PR-1500.1M Mono Block Ampเครื่องฟอก (1)
  • Dual 12-inch Car Subwoofer in Loaded Enclosure (1)
  • สมบูรณ์ Amplifier Installation Wire Kit (1)

The wiring kit includes:

  • High Grade Twisted Pair 100% Copper RCA Cables
  • Blue Super Flex Power Cable
  • สายดินสีดำ
  • Black Remote Cable and Remote Control
  • Black Split Tube
  • สายลำโพง
  • Gold Plated ANL Heat Resistant Fuse Holder
  • 30 Amp ANL Gold Plated Fuse
  • Accessories: Wire ties, ring terminals, butt connectors, spades, and grommet
PRORECK Wiring Installation Kit Components

Image: All components included in the PRORECK wiring installation kit.

4. การตั้งค่าและการติดตั้ง

Proper installation is critical for optimal performance and safety. Follow these steps carefully.

4.1 Subwoofer Enclosure Placement

Place the dual 12-inch subwoofer enclosure in a secure location within your vehicle, typically the trunk or cargo area. Ensure it is firmly anchored to prevent movement during driving. The enclosure features a 15% angle for optimal vehicle bass alignment.

PRORECK PR-122M Dual 12-inch Subwoofer Enclosure Front View

ภาพ: ด้านหน้า view of the PRORECK PR-122M dual 12-inch subwoofer enclosure.

PRORECK PR-122M Subwoofer Enclosure Rear View with Speaker Terminals

ภาพ: ด้านหลัง view of the PRORECK PR-122M subwoofer enclosure, showing the speaker terminals.

4.2 Ampการติดตั้ง lifier

Mount the PRORECK PR-1500.1M amplifier in a dry, well-ventilated area, away from direct sunlight or heat sources. Ensure there is sufficient space around the amplifier for proper heat dissipation. Secure it firmly to a solid surface using appropriate hardware.

โปรเรค PR-1500.1M Amplifier ด้านบน View ด้วยการควบคุม

ภาพ: ด้านบน view of the PRORECK PR-1500.1M amplifier, showing the control panel.

โปรเรค PR-1500.1M Amplifier ด้าน View with Power and Speaker Terminals

ภาพ: ด้านข้าง view of the PRORECK PR-1500.1M amplifier, showing the power and speaker terminals.

4.3 การเชื่อมต่อสายไฟ

Refer to the diagram below for detailed connection points on the PRORECK PR-1500.1M amplifier. Use the provided wiring kit for all connections.

โปรเรค PR-1500.1M Amplifier ไดอะแกรมการเชื่อมต่อ

Image: Detailed diagram of the PRORECK PR-1500.1M amplifier's input, output, and control connections.

  1. Power Connections (GND, REM, +12V):
    • GND (กราวด์): Connect the black ground wire from the wiring kit to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid, low-resistance connection.
    • REM (การเปิดใช้งานจากระยะไกล): Connect the black remote cable from the wiring kit to the remote turn-on output of your head unit. This wire turns the amplifier on and off with your car's stereo.
    • +12V (ไฟเลี้ยง): Connect the blue super flex power cable from the wiring kit to the positive terminal of your car battery. Install the 30 Amp ANL fuse holder and fuse as close to the battery as possible (within 18 inches) for protection.
  2. Speaker Output (4 ohm): Connect the speaker wire from the subwoofer enclosure to the speaker output terminals on the amplifier. Ensure correct polarity (+ to + and - to -). The subwoofer system is designed for a 4-ohm mono-block connection.
  3. อินพุตสาย RCA: Connect the RCA cables from your head unit's RCA pre-outs to the RCA Line Input on the ampชีวิต.
  4. อินพุตระดับสูง: If your head unit does not have RCA pre-outs, you can use the High Level Input by connecting it directly to your head unit's speaker outputs.
  5. Full-Range RCA Output: This output can be used to daisy-chain the audio signal to another ampชีวิต.
  6. Dashboard Bass Remote Control Interface: Connect the remote control cable to this port.
  7. FUSE (30A): การ amplifier has a built-in 30A fuse for protection.

5. คู่มือการใช้งาน

เมื่อติดตั้งเสร็จแล้ว ให้ปรับแต่ง ampการตั้งค่าเครื่องขยายเสียงเพื่อประสิทธิภาพเสียงที่ดีที่สุด

5.1 Amplifier ควบคุม

The PRORECK PR-1500.1M amplifier features several controls to fine-tune your bass output:

  • การควบคุมการรับอินพุต: ปรับค่านี้ให้ตรงกับระดับเสียงเอาต์พุตtage of your head unit. Start with the gain at minimum and slowly increase it until you achieve clear, undistorted bass. Avoid setting it too high, as this can cause distortion.
  • Bass EQ (5-12dB Narrow Bass Equalizer): Use this control to boost the bass frequencies. Adjust carefully to avoid over-emphasizing bass, which can lead to distortion.
  • Fully Adjustable Low Pass Crossover (LPF): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust the LPF (e.g., 50Hz-250Hz) to blend the subwoofer's output seamlessly with your main speakers.
  • Fully Adjustable Subsonic Filter: This filter removes extremely low frequencies that are inaudible and can cause the subwoofer to waste power and potentially damage itself. Set it slightly below your LPF setting, typically between 15Hz-50Hz.
  • Mute & Delay Turn On Circuitry: This feature prevents turn-on thumps or pops.
  • Power & Diagnostic LED Indicators: ไฟ LED เหล่านี้บ่งชี้ amplifier's status. A green light typically indicates power, while a red light may indicate a protection mode or fault.

5.2 รีโมทควบคุมเสียงเบสบนแผงควบคุม

The included dashboard remote allows you to conveniently adjust the bass level from your driver's seat without needing to access the amplifier โดยตรง

6. การบำรุงรักษา

To ensure the longevity and performance of your PRORECK subwoofer system, follow these simple maintenance guidelines:

  • การทำความสะอาด: เช็ดทำความสะอาดเป็นระยะ ampเช็ดทำความสะอาดตู้ลำโพงและซับวูฟเฟอร์ด้วยผ้าแห้งเนื้อนุ่ม หลีกเลี่ยงการใช้สารเคมีรุนแรงหรือน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
  • ตรวจสอบการเชื่อมต่อ: ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดอย่างสม่ำเสมอเพื่อให้แน่ใจว่าแน่นหนาและปราศจากสนิม การเชื่อมต่อที่หลวมอาจทำให้ประสิทธิภาพการทำงานลดลงหรือเกิดความเสียหายได้
  • การระบายอากาศ : ให้แน่ใจว่า amplifier's ventilation fins remain clear of obstructions to prevent overheating.
  • หลีกเลี่ยงความชื้น: Keep the system dry and away from excessive moisture.

7 การแก้ไขปัญหา

If you experience issues with your PRORECK subwoofer system, refer to the following common problems and solutions:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีไฟฟ้า / Ampไฟแสดงสถานะไม่เปิด
  • ฟิวส์ขาด (แบตเตอรี่หรือ ampเครื่องฟอก)
  • การเชื่อมต่อไฟฟ้าหรือกราวด์หลวม
  • ไม่มีสัญญาณเปิดเครื่องระยะไกล
  • ตรวจสอบและเปลี่ยนฟิวส์
  • ตรวจสอบว่าการเชื่อมต่อไฟฟ้า กราวด์ และระยะไกลทั้งหมดมีความปลอดภัย
  • ตรวจสอบให้แน่ใจว่าชุดควบคุมหลักส่งสัญญาณเปิด/ปิดระยะไกลมาให้แล้ว
ไม่มีเสียงออก
  • การเชื่อมต่อ RCA หรือลำโพงหลวม
  • Ampเครื่องขยายเสียงอยู่ในโหมดป้องกัน
  • ตั้งค่าเกนต่ำเกินไป
  • การตั้งค่าชุดอุปกรณ์หลัก
  • ตรวจสอบการเชื่อมต่อสาย RCA และสายลำโพงทั้งหมด
  • Check for short circuits in speaker wiring.
  • Increase gain slowly.
  • Verify head unit's subwoofer output is enabled and volume is up.
เสียงผิดเพี้ยน
  • ตั้งค่าเกนสูงเกินไป
  • Bass EQ set too high
  • การตั้งค่าครอสโอเวอร์ไม่ถูกต้อง
  • สายลำโพงเสียหาย
  • ลด ampกำไร lifier
  • Lower Bass EQ setting.
  • Adjust LPF and Subsonic filter settings.
  • Inspect speaker wires for damage.
Ampเครื่องขยายเสียงร้อนเกินไป
  • การระบายอากาศไม่เพียงพอ
  • โหลดอิมพีแดนซ์ที่ไม่เหมาะสม
  • ตั้งค่าเกนสูงเกินไป
  • ให้แน่ใจว่ามีการไหลเวียนของอากาศเพียงพอรอบๆ ampชีวิต.
  • ตรวจสอบให้แน่ใจว่าค่าความต้านทานของลำโพงตรงกัน amplifier specifications (4 ohms).
  • ลดการตั้งค่าเกน

8. ข้อมูลจำเพาะ

Detailed specifications for the PRORECK PR-122M Subwoofer System:

  • ประเภทสินค้า : Complete Car Subwoofer System
  • แบบอย่าง: พีอาร์-122เอ็ม
  • ขนาดซับวูฟเฟอร์: จอคู่ 12 นิ้ว
  • พลังสูงสุด: 1500 วัตต์
  • RMS Power (Ampตัวฟอก): 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N
  • Dynamic Power (Ampตัวฟอก): 400 วัตต์ @ 2 โอห์ม
  • การตอบสนองความถี่: 15เฮิรตซ์ - 20กิโลเฮิรตซ์
  • Amplifier คลาส: Class A/B Mono-Block
  • วัสดุของกล่องหุ้ม: High quality aviation grade tweed carpet with embroidery
  • Enclosure Angle: 15% (for vehicle bass alignment)
  • วอยซ์คอยล์: High power 1.5" aluminum 4-layer voice coils
  • เทคโนโลยีการเชื่อมต่อ: อาร์ซีเอ
  • โหมดเอาต์พุตเสียง: โมโน
  • Amplifier Dimensions (L x W x H): 11 x 9.1 x 1.9 นิ้ว
  • ขนาดของซับวูฟเฟอร์ (ยาว x กว้าง x สูง): 28.7 x 14.2 x 15.7 นิ้ว

9. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official PRORECK webไซต์ เก็บหลักฐานการซื้อของคุณไว้เพื่อใช้ในกรณีเรียกร้องการรับประกัน

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.