HASWING Protruar 2.0 50745

HASWING Electric Trolling Motor User Manual

Model: Protruar 2.0 50745

การแนะนำ

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HASWING Electric Trolling Motor, Model Protruar 2.0 50745. Please read this manual thoroughly before using the motor to ensure proper function and longevity.

HASWING Electric Trolling Motor

ภาพ: เหนือview of the HASWING Electric Trolling Motor.

การติดตั้งและการตั้งค่า

การแกะกล่อง

นำชิ้นส่วนทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง ตรวจสอบให้แน่ใจว่าชิ้นส่วนทั้งหมดที่ระบุไว้ในรายการบรรจุภัณฑ์ครบถ้วนและไม่เสียหาย หากมีชิ้นส่วนใดขาดหายหรือเสียหาย โปรดติดต่อตัวแทนจำหน่ายของคุณทันที

การติดตั้งมอเตอร์

The Protruar motor is designed for transom mounting. Ensure the transom is sturdy enough to support the motor's weight and thrust. Securely attach the transom mount bracket to the boat's transom using appropriate hardware. Tighten all fasteners to prevent movement during operation.

Trolling motor mounted on a boat transom

Image: The trolling motor properly mounted on a boat's transom.

Shaft Length Adjustment

Adjust the shaft length so that the propeller is submerged at an adequate depth to prevent cavitation and ensure efficient thrust. The depth collar allows for precise adjustment.

การเชื่อมต่อแบตเตอรี่

Connect the motor to a 24V deep cycle battery system. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Use appropriate gauge wiring and secure connections to prevent power loss or electrical hazards.

คำแนะนำการใช้งาน

การควบคุมความเร็วแบบไม่มีขั้นตอน

The motor features digital technology for stepless forward and reverse speed control, accessible directly from the handle. Rotate the handle grip to increase or decrease speed smoothly.

Speed control on the motor handle

Image: Close-up of the stepless speed control on the motor handle.

Folding and Tilting Handle

The trolling handle can fold at an angle of 180 degrees for compact storage and transport. It also features an expanding handle extension of 400mm for comfortable operation. The motor offers 10 or 7 levels of tilting positions, allowing you to adjust the motor's angle relative to the water surface.

Folding and expanding handle features

Image: Illustration of the folding and expanding handle functions.

Motor tilting positions

Image: Diagram showing the motor's tilting positions.

Power Display (Battery Meter)

A power display located on top of the motor shows three levels of battery power, allowing you to monitor the status of your deep cycle battery conveniently.

Battery power display on motor head

Image: Close-up of the battery power display on the motor head.

Brushless Motor and Propeller

The motor features a durable brushless design for efficient and quiet operation. It includes an anti-impact prop-clutch ability that disengages the running propeller if it encounters an obstruction, preventing damage to the prop.

Brushless motor and propeller

ภาพ: View of the brushless motor and propeller assembly.

การซ่อมบำรุง

Regular maintenance ensures optimal performance and extends the life of your trolling motor.

  • หลังการใช้แต่ละครั้ง: Rinse the motor, especially the propeller and shaft, with fresh water if used in saltwater. Wipe down all surfaces to remove salt residue and dirt.
  • การตรวจสอบใบพัด: Regularly check the propeller for fishing line, weeds, or other debris that may be wrapped around the shaft or propeller hub. Remove any obstructions. Inspect for chips, cracks, or bends.
  • การเชื่อมต่อไฟฟ้า: Periodically inspect all electrical connections for corrosion or looseness. Clean and tighten as necessary. Apply dielectric grease to terminals to prevent corrosion.
  • เพลาและฐานยึด: Check the shaft for any signs of bending or damage. Ensure the transom mount is securely fastened and free from cracks.
  • พื้นที่จัดเก็บ: When not in use, store the motor in a dry, protected area. Disconnect the battery for long-term storage.

การแก้ไขปัญหา

This section addresses common issues you might encounter with your trolling motor.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Motor does not start or has no power.Low battery charge; Loose or corroded battery connections; Blown fuse/circuit breaker.Check battery charge and recharge if necessary; Clean and tighten all battery connections; Check and replace fuse/reset circuit breaker.
แรงขับลดลงหรือมีเสียงผิดปกติPropeller fouled with debris; Damaged propeller; Motor cavitation.Clear propeller of debris; Replace damaged propeller; Adjust motor depth to ensure propeller is fully submerged.
มอเตอร์ทำงานเป็นช่วงๆLoose wiring connections; Overheating.Inspect and secure all wiring connections; Allow motor to cool down if it has been running continuously at high power.

ข้อมูลจำเพาะ

Detailed technical specifications for the HASWING Protruar 2.0 50745 Electric Trolling Motor.

HASWING Protruar 2.0 50745 Specifications

Image: Visual representation of the motor specifications.

คุณสมบัติรายละเอียด
แบบอย่างProtruar 2.0 50745
พลังเพลา2แรงม้า
แรงขับสูงสุด85 ปอนด์
ปริมาณสูงสุดtageกระแสตรง 24 โวลต์
Power - Max960วัตต์
Amp - Max50เอ
การปรับความลึกคอลึก
Prop Type/Size3 Blade Prop / 9.3 In. Diam
Prop Speed at Full PowerMax. 1350rpm underwater
ประเภทแบตเตอรี่2 x 105 AH Deep Cycle
อัตราทดพวงมาลัย360 Degree Control
Decibel Level (db) ≤55เดซิเบล
น้ำหนัก6.9กก. / 15.2ปอนด์
ประเภทเพลาอลูมิเนียมหล่อ
ความยาวเพลา900mm / 35.4 Inch
Max Boat Length & Load6.5เมตร/21.3ฟุต

การรับประกันและการสนับสนุน

For specific warranty information and support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for warranty claims.

For technical assistance or spare parts, please contact HASWING customer service through their official channels.

© 2024 HASWING. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.