DIGITEN DHTC-1011 Digital Waterproof Temperature and Humidity Sensor Probe User Manual

สินค้าเกินview

This document provides instructions for the DIGITEN Digital Waterproof Temperature and Humidity Sensor Probe, designed exclusively for use with the DIGITEN DHTC-1011 Temperature and Humidity Controller.

The sensor probe measures both temperature and humidity, providing essential data to your DHTC-1011 controller for accurate environmental monitoring and control. Its waterproof design allows for use in various environments where moisture is present.

Image: The DIGITEN DHTC-1011 Digital Waterproof Temperature and Humidity Sensor Probe, showing the main sensor unit with its protective casing and connected wires.

ความเข้ากันได้

สำคัญ: This sensor probe is specifically designed and compatible เท่านั้น with the DIGITEN DHTC-1011 Temperature and Humidity Controller. It is not intended for use with other models or brands of controllers.

การติดตั้งและการตั้งค่า

แกะกล่องเซ็นเซอร์: Carefully remove the sensor probe from its packaging. Inspect for any visible damage.
Locate the Sensor Port: Identify the dedicated sensor input port on your DIGITEN DHTC-1011 Temperature and Humidity Controller. This port is typically labeled for the temperature and humidity sensor.
เชื่อมต่อเซ็นเซอร์: Insert the 3.5mm jack connector of the sensor probe firmly into the corresponding port on the DHTC-1011 controller. Ensure a secure connection.

3.5mm jack connector of the DIGITEN sensor probe

Image: Close-up of the 3.5mm jack connector on the sensor probe cable, ready for connection to the controller.

จัดวางหัววัด: Place the waterproof sensor probe in the environment where temperature and humidity measurements are required. Ensure the probe is not obstructed and has adequate airflow for accurate readings.
เปิดเครื่อง: Once connected and positioned, power on your DHTC-1011 controller. The controller should automatically detect the sensor and begin displaying readings.

คำแนะนำการใช้งาน

After successful installation, the sensor probe continuously transmits temperature and humidity data to your DIGITEN DHTC-1011 controller. Refer to your DHTC-1011 controller's user manual for specific instructions on:

Viewing current temperature and humidity readings.
Setting desired temperature and humidity control ranges.
Calibrating the sensor (if supported by the controller).
Understanding alarm functions related to sensor readings.

The sensor itself does not have user-adjustable settings; all controls are managed through the connected DHTC-1011 controller.

การซ่อมบำรุง

การทำความสะอาด: Periodically clean the sensor probe with a soft, damp cloth to remove dust or debris that may accumulate on its surface. Avoid using harsh chemicals or abrasive materials.
การตรวจสอบสายเคเบิล: Regularly inspect the sensor cable for any signs of damage, kinks, or exposed wires. Damaged cables can lead to inaccurate readings or sensor malfunction. If damage is found, replace the sensor probe.
ความสมบูรณ์ของน้ำ: While the probe is waterproof, ensure the connection point to the controller remains dry unless the controller itself is rated for wet environments.
พื้นที่จัดเก็บ: If storing the sensor, ensure it is clean and dry, and store it in a safe place to prevent physical damage to the probe or cable.

การแก้ไขปัญหา

ปัญหา	สาเหตุที่เป็นไปได้	สารละลาย
No readings or incorrect readings on controller.	Loose or improper connection. Damaged sensor cable or probe. Sensor not compatible with controller. ตัวควบคุมทำงานผิดปกติ	Ensure the 3.5mm jack is fully inserted into the DHTC-1011 controller. Inspect the cable for kinks, cuts, or exposed wires. If damaged, replace the sensor probe. Confirm you are using the sensor with a DIGITEN DHTC-1011 controller. Test the controller with a known working sensor, if available.
Humidity reading does not change or is stuck.	เซ็นเซอร์ทำงานผิดปกติ Environmental conditions are stable.	Move the sensor to an environment with known humidity changes to verify functionality. หากปัญหายังคงอยู่ เซ็นเซอร์อาจชำรุดและจำเป็นต้องเปลี่ยนใหม่
Temperature reading is inaccurate (e.g., consistently high or low).	ตำแหน่งเซ็นเซอร์ เซ็นเซอร์ทำงานผิดปกติ Controller calibration needed.	Ensure the sensor is not exposed to direct heat sources, cold drafts, or direct sunlight. Compare readings with a reliable thermometer in the same location. Refer to your DHTC-1011 controller manual for calibration procedures, if applicable. If the discrepancy is significant and persistent, the sensor may be faulty.

ข้อมูลจำเพาะ

ความเข้ากันได้: Exclusively for DIGITEN DHTC-1011 Temperature and Humidity Controller
ช่วงการควบคุมอุณหภูมิ: -40°C ถึง 120°C / -40°F ถึง 248°F
ช่วงการควบคุมความชื้น: ความชื้นสัมพัทธ์ 1-100%
ความแม่นยำของอุณหภูมิ: ± 0.3 ° C / ± 0.3 ° F
ความแม่นยำของความชื้น: ±2%ความชื้นสัมพัทธ์
Sensor Lead Length: 2 เมตร (6 ฟุต)
กันน้ำ: ใช่
ประเภทการติดตั้ง: Tabletop (referring to the controller, the probe itself is typically placed)
ความต้องการแบตเตอรี่: No batteries required (powered by controller)

ข้อมูลการรับประกัน

DIGITEN provides a one-year warranty term for any quality problems with this product. Please retain your proof of purchase for warranty claims. For further details or to initiate a warranty claim, please contact DIGITEN customer support.

การสนับสนุนลูกค้า

If you encounter any issues or have questions regarding the DIGITEN Digital Waterproof Temperature and Humidity Sensor Probe, please contact DIGITEN customer support through the retailer's platform or visit the official DIGITEN webเว็บไซต์เพื่อขอความช่วยเหลือ

For more information about DIGITEN products, visit the DIGITEN Store on Amazon.

DIGITEN DHTC-1011 Sensor Probe