1. สูงกว่าview
This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.
2. คุณสมบัติของผลิตภัณฑ์
- การจดจำลายนิ้วมือแบบไบโอเมตริก: Securely unlock with your fingerprint. Supports up to 10 registered users.
- โครงสร้างทนทาน: Made from stainless steel and zinc alloy for enhanced security.
- ทนทานต่อสภาพอากาศ: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
- แบตเตอรี่ใช้งานได้ยาวนาน: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
- การชาร์จ USB-C: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
- การออกแบบที่หรูหรา: Designed by Guillaume Delvigne, available in multiple colors.
Image: The LEXON Nomaday Lock showcasing ดีไซน์และสีที่มีให้เลือก
3. เนื้อหาบรรจุภัณฑ์
- LEXON LL128N Fingerprint Padlock
- สายชาร์จ USB-C
- คู่มือการใช้งาน
4. การตั้งค่า
4.1 การลงทะเบียนลายนิ้วมือครั้งแรก (ผู้ดูแลระบบ)
Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.
- Press and hold your finger on the fingerprint sensor until the แสงสีฟ้า illuminates. Release your finger.
- การ ไฟเขียว will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
- ในขณะที่ ไฟเขียว is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.
After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.
Video: Demonstrates the process of setting up administrator fingerprints on the padlock.
4.2 Registering Additional Fingerprints (Users 3-10)
To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.
- กด ค้างไว้ นิ้วของผู้ดูแลระบบ on the sensor until the แสงสีฟ้า illuminates. Release the finger.
- การ ไฟเขียว will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.
Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.
4.3 Deleting All Fingerprints (Factory Reset)
To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:
- วาง นิ้วของผู้ดูแลระบบ on the sensor and hold it. The แสงสีฟ้า will illuminate, then turn สีแดง. Continue holding.
- After the red light illuminates, the ไฟเขียว will flash once. Release your finger immediately after the green light flashes.
All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.
