ErGear Triple Monitor Mount (Model EGTS5B) Instruction Manual

การแนะนำ

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your ErGear Triple Monitor Mount, Model EGTS5B. Please read this manual thoroughly before installation and retain it for future reference.

คุณสมบัติผลิตภัณฑ์

• ความเข้ากันได้กว้าง: Supports three monitors from 13 to 27 inches, with VESA mounting patterns of 75x75mm or 100x100mm. Each arm can hold up to 17.6 lbs (8 kg).
• Superior Stability and Durability: Constructed from premium steel, the monitor arm is tested for 20,000 lift cycles, ensuring long-lasting performance without monitor sag or wobble.
• การปรับเปลี่ยนแบบยืดหยุ่น: Features +/-90° swivel, +/-45° tilt, and 360° rotation for optimal viewing angles, reducing neck and eye strain.
• การจัดการสายเคเบิลแบบบูรณาการ: Neatly routes wires along the arms and pole for a clean workspace.
• Built-in USB 3.0 Ports: Two USB 3.0 ports on the base provide convenient charging and data transfer directly from your desktop.
• สองตัวเลือกการติดตั้ง: Supports C-clamp mounting for desks 0.39"–3.54" thick and grommet mounting for desks 0.39"–3.15" thick.

ข้อมูลจำเพาะ

การติดตั้ง

The ErGear Triple Monitor Mount offers two primary installation methods: C-clamp and grommet mounting. Choose the method best suited for your desk.

1. Desk Compatibility Check

Ensure your monitors are compatible with VESA 75x75mm or 100x100mm patterns and weigh no more than 17.6 lbs each. Verify your desk thickness for the chosen mounting option:

• ซี-ซีแอลamp: 0.39"–3.54" (10-90mm) thick
• ห่วงตาไก่: 0.39"–3.15" (10-80mm) thick

Figure 1: Product compatibility overview, including monitor size, VESA, weight, and desk thickness requirements.

Figure 2: Guide to checking VESA hole patterns on your monitor and removing existing stands.

2. Choose Mounting Option

Figure 3: Visual representation of C-clamp and Grommet mounting options with corresponding desk thickness requirements.

3. Assemble the Mount

Follow the detailed instructions provided in the package for assembling the main pole and arms. Ensure all screws are tightened securely.

4. Attach Monitors

Carefully attach your monitors to the VESA plates on each arm. Ensure the VESA screws are tightened to secure the monitors.

การใช้งานและการปรับแต่ง

The ErGear Triple Monitor Mount allows for extensive adjustments to achieve an ergonomic setup. Always adjust the tension of the gas spring arms and tilt head after mounting your monitors.

1. การปรับความตึงของสปริงแก๊ส

If your monitor is falling down or rising up unexpectedly, the gas spring tension needs adjustment. Locate the screw on the top of the center joint of the monitor arm.

• ถึง increase tension (raise monitor), turn the bolt counter-clockwise.
• ถึง decrease tension (lower monitor), turn the bolt clockwise.

Hold the upper arm horizontally during adjustment to ensure proper calibration. The arm should maintain its position once correctly adjusted.

รูปที่ 4: รายละเอียด view of the gas spring tension adjustment point on the monitor arm.

2. Securing the Tilt Head

If the monitor tilt head is dropping down, tighten the bolt on the tilt mechanism to secure the desired angle. Turn the bolt clockwise to increase tension.

3. Full Motion Adjustments

The arms allow for +/-90° swivel, +/-45° tilt, and 360° rotation. Adjust your monitors to your preferred ergonomic position. The central monitor is fixed in height on the pole, while the side arms offer independent height adjustment along the pole and gas spring movement.

รูปที่ 5: เกินview of the full range of motion for the monitor arms.

รูปที่ 6: อดีตamples of multiple screen configurations for enhanced productivity.

Cable Management and USB Ports

The mount features integrated cable management channels to keep your workspace tidy. Route all monitor and power cables through these channels for a clean setup.

Figure 7: Integrated USB 3.0 ports on the mount base for convenient device charging and data transfer.

รูปที่ 8: อดีตample of effective cable management using the integrated channels.

การซ่อมบำรุง

To ensure the longevity and optimal performance of your ErGear Triple Monitor Mount, follow these maintenance guidelines:

• การทำความสะอาดปกติ: เช็ดทำความสะอาดฐานยึดด้วยผ้าเนื้อนุ่มและแห้งamp ผ้าสำหรับเช็ดฝุ่นและเศษสิ่งสกปรก หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
• ตรวจสอบการเชื่อมต่อ: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary to prevent instability.
• Gas Spring Check: If monitors begin to sag or rise unexpectedly, re-adjust the gas spring tension as described in the "Operating and Adjustments" section.

การแก้ไขปัญหา

If you encounter issues with your ErGear Triple Monitor Mount, refer to the following common troubleshooting steps:

• Monitor Sags or Drops: Adjust the gas spring tension by turning the bolt counter-clockwise to increase tension. Ensure the monitor weight is within the specified limit (17.6 lbs per arm).
• Monitor Rises Too High: Adjust the gas spring tension by turning the bolt clockwise to decrease tension.
• Monitor Tilts Downward: Tighten the tilt mechanism bolt on the VESA plate to secure the desired tilt angle.
• ภูเขารู้สึกไม่มั่นคง: Verify that the C-clamp or grommet mount is securely fastened to the desk and all connections on the pole and arms are tightened. Ensure your desk is stable and can support the combined weight of the mount and monitors.
• พอร์ต USB ไม่ทำงาน: Check that the USB cable from the mount is properly connected to your computer or a power source.

การรับประกันและการสนับสนุน

For warranty information, technical support, or replacement parts, please contact ErGear customer service through their official webหรือร้านค้าที่ซื้อสินค้า โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ

ErGear Official Webเว็บไซต์: Visit the ErGear Store