NiteRider Lumina Micro 900

NiteRider Lumina Micro 900 Front Bike Light Instruction Manual

สินค้าเกินview

The NiteRider Lumina Micro 900 is a compact and lightweight front bike light designed for various cycling conditions, including mountain, road, commuting, and urban environments. It features a powerful 900-lumen output, USB rechargeability, and water resistance, ensuring visibility and safety during your rides.

Key features include a Lock Mode to prevent accidental activation, Intellicharge technology for faster charging, and a durable DuPont fiberglass reinforced nylon housing. The light offers five distinct modes to adapt to different lighting needs and optimize battery life.

NiteRider Lumina Micro 900 bike light, a compact and lightweight front cycling light.

Image: NiteRider Lumina Micro 900 compact front bike light.

สิ่งที่รวมอยู่

  • หัวไฟ LED
  • แบตเตอรี่ลิเธียมไออนภายใน
  • แฮนด์บาร์ Clamp Mount (fits up to 35mm)
  • สายชาร์จ USB

การติดตั้งและการตั้งค่า

The NiteRider Lumina Micro 900 comes with a handlebar clamp mount for easy installation. This mount is designed to fit standard and oversized 35mm handlebars.

  1. ติดตั้งตัวยึดแฮนด์จักรยาน: ยึด CL แฮนด์จับให้แน่นamp mount to your bicycle's handlebar. Ensure it is tightened sufficiently to prevent movement during rides.
  2. Slide in the Light Head: Slide the LED light head onto the handlebar mount until it clicks securely into place. The quick-release tab allows for convenient removal and installation.
  3. ปรับมุม: Adjust the angle of the light to ensure optimal illumination of your path without blinding oncoming traffic.
NiteRider bike light mounted on handlebars.

Image: NiteRider light securely mounted on bicycle handlebars.

คำแนะนำการใช้งาน

Lock Mode Operation

The Lumina Micro 900 features a Lock Mode to prevent accidental power-on during transport or storage, conserving battery life. The light is set to Lock Mode at the factory.

To Unlock the Light:

  1. กดปุ่มเปิด/ปิดค้างไว้ประมาณ 7-10 วินาที
  2. The LED indicator in the switch will change from red to blue, indicating the light is unlocked.
  3. Press and release the power button again to turn the light on.

To Lock the Light:

  1. With the light on, press and hold the power button for approximately 7-10 seconds.
  2. The light will cycle through flash modes and then turn off, with the LED indicator turning red, signifying it is now in Lock Mode.

Video: Instructions on how to unlock the NiteRider Lumina light when the button is lighting up red.

Video: Demonstrates how to unlock Lumina Series lights that are factory-locked for safety.

Light Modes and Run Times

The Lumina Micro 900 offers five distinct lighting modes:

  • Low Steady: 200 lumens @ 11:00 hours
  • ปานกลาง: 450 lumens @ 4:30 hours
  • สูง: 900 lumens @ 2:00 hours
  • Safety Flash: @ 11:00 hours
  • โหมดเดิน: 30 lumens @ 60:00 hours

ชาร์จไฟ

The Lumina Micro 900 is USB rechargeable. The Intellicharge™ feature reduces charging time, allowing you to spend more time riding.

  • Connect the provided USB charging cable to the light and a power source (e.g., computer, USB wall adapter) outputting over 500 mA.
  • The typical charge time is 2 hours and 30 minutes.
NiteRider Lumina Micro 900 showing USB charging port and charge time.

Image: NiteRider Lumina Micro 900 highlighting USB charging and charge time.

ตัวระบุระดับแบตเตอรี่

The power button doubles as a battery level indicator:

  • แสงสีฟ้า: Indicates a good battery level remaining.
  • ไฟแดง: Indicates the battery level is below 20% remaining.

การซ่อมบำรุง

  • การทำความสะอาด: เช็ดไฟอ่อนๆงamp ผ้าเพื่อขจัดสิ่งสกปรกและเศษขยะ หลีกเลี่ยงการใช้สารเคมีที่รุนแรงหรือวัสดุที่มีฤทธิ์กัดกร่อน
  • พื้นที่จัดเก็บ: Store the light in a cool, dry place when not in use. If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge every few months to maintain battery health.
  • ความต้านทานน้ำ: The light is water resistant (IP64 rated). While it can withstand splashes and light rain, avoid submerging it in water. Ensure the USB port cover is securely closed to maintain water resistance.

การแก้ไขปัญหา

  • ไฟไม่เปิด: If the light does not turn on, it may be in Lock Mode. Refer to the "Lock Mode Operation" section to unlock the device. Ensure the battery is charged.
  • ระยะเวลาการทำงานสั้น: Ensure the light is fully charged before use. Battery performance can decrease over time and in cold temperatures.
  • ปัญหาการชาร์จ: Verify the USB cable is properly connected and the power source is functioning. If the light still doesn't charge, try a different USB cable or power source.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ชื่อรุ่นNiteRider Lumina Micro 900 LED Front Bike Headlight
เอาท์พุตแสงสูงสุด900 ลูเมน
จำนวนการตั้งค่า5 (Low Steady, Medium, High, Safety Flash, Walk Mode)
แหล่งพลังงานBattery Powered (Internal Li-Ion)
เวลาในการชาร์จ2:30 hours (with >500 mA power source)
ระดับความต้านทานต่อน้ำIP64 (ทนน้ำ)
น้ำหนักสินค้า130 grams (light head + handlebar mount)
วัสดุDuPont fiberglass reinforced nylon housing
ประเภทการติดตั้งHandlebar Mount (up to 35mm)
Diagram showing the dimensions of the NiteRider Lumina Micro Series light.

Image: Lumina Micro Series light dimensions.

การรับประกันและการสนับสนุน

NiteRider offers comprehensive warranty coverage for the Lumina Micro 900:

  • การรับประกันตลอดอายุการใช้งานแบบจำกัด: Covers defects in mechanical components (housings, covers, mounts, fasteners) and LEDs.
  • รับประกัน 2 ปี: Covers printed circuit boards, switches, and AC adapters.
  • รับประกัน 1 ปี: Covers rechargeable battery cells.

For further support or warranty claims, please visit the official NiteRider webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา

คุณสามารถค้นหาข้อมูลและสินค้าเพิ่มเติมได้ที่ NiteRider Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.