Torin BIG RED AT825010-9B Floor Jack Rubber Pad Instruction Manual

1. บทนำ

The Torin BIG RED AT825010-9B Floor Jack Rubber Pad is designed to provide a protective barrier between your floor jack and your vehicle's frame rails. This durable rubber pad helps prevent damage, scratches, and deformation to the vehicle's pinch welds and undercarriage components during lifting operations. Its universal slotted design ensures compatibility with most standard floor jacks, making it an essential accessory for safe vehicle maintenance.

Figure 1: Torin BIG RED AT825010-9B Floor Jack Rubber Pad, showing its robust construction and slotted design.

2. ข้อมูลด้านความปลอดภัย

คำเตือน: การไม่ปฏิบัติตามคำแนะนำด้านความปลอดภัยเหล่านี้อาจส่งผลให้ทรัพย์สินเสียหาย ได้รับบาดเจ็บสาหัส หรือเสียชีวิตได้

ข้อควรระวังเพื่อความปลอดภัยทั่วไป:

• Always read and understand the instruction manual for your floor jack before use.
• Ensure the vehicle is on a flat, stable, and level surface before attempting to lift.
• ห้ามทำงานใต้รถที่รองรับด้วยแม่แรงเพียงอย่างเดียว ควรใช้ขาตั้งแม่แรงที่เหมาะสมเพื่อรองรับรถหลังจากยกขึ้นแล้วเสมอ
• Verify that the jack pad is correctly seated on the floor jack's saddle and aligned with the vehicle's designated lifting point (pinch weld or frame rail).
• Do not exceed the weight capacity of your floor jack or the jack pad.
• ขณะยกหรือลดระดับสิ่งของ ควรระวังอย่าให้มือและเท้าอยู่ใกล้ชิ้นส่วนที่กำลังเคลื่อนไหว
• Inspect the jack pad for wear, cracks, or damage before each use. Replace if any damage is observed.
• สวมอุปกรณ์ป้องกันส่วนบุคคลที่เหมาะสม รวมถึงแว่นตานิรภัยและถุงมือ
• ให้เด็กและผู้ยืนดูอยู่ห่างจากพื้นที่ทำงาน

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบให้แน่ใจว่ามีสินค้าครบถ้วนก่อนเปิดบรรจุภัณฑ์:

• Torin BIG RED AT825010-9B Floor Jack Rubber Pad (Quantity: 1 or 2, depending on purchase option)

4. การตั้งค่า

The Torin BIG RED AT825010-9B Floor Jack Rubber Pad requires minimal setup. Follow these steps to prepare for use:

1. Inspect the Jack Pad: Before first use, and prior to each subsequent use, thoroughly inspect the rubber pad for any signs of wear, cuts, cracks, or deformation. Ensure the material is intact and free from damage that could compromise its integrity.
2. Clean the Jack Pad: Wipe the jack pad clean of any dirt, grease, or debris to ensure a secure grip on both the floor jack and the vehicle.
3. ตรวจสอบความเข้ากันได้: Confirm that the dimensions of the jack pad are compatible with your floor jack's saddle. The universal slotted design is intended to fit most standard floor jack saddles.

รูปที่ 2: มิติ view of the jack pad, illustrating its size and slotted design for compatibility assessment.

5. คู่มือการใช้งาน

Using the Torin BIG RED AT825010-9B Floor Jack Rubber Pad correctly is crucial for protecting your vehicle.

1. จัดวางตำแหน่งรถ: Park the vehicle on a firm, level surface. Engage the parking brake and, if applicable, place the transmission in 'Park' (automatic) or 'Reverse' (manual). Block the wheels that will remain on the ground.
2. Place the Jack Pad: Carefully place the Torin BIG RED AT825010-9B rubber pad onto the saddle of your floor jack. Ensure it is centered and stable.
3. Locate Lifting Point: Identify the vehicle's manufacturer-recommended lifting point, typically a pinch weld or a reinforced frame rail. Refer to your vehicle's owner's manual for precise locations.
4. ตำแหน่งแม่แรง: Roll the floor jack with the rubber pad underneath the designated lifting point. Align the slot in the rubber pad with the vehicle's pinch weld or ensure the pad is squarely under the frame rail.
5. ยกตัวรถขึ้น: Slowly and steadily raise the floor jack, ensuring the jack pad maintains proper contact with both the jack saddle and the vehicle's lifting point. Observe for any slippage or misalignment.
6. ติดตั้งขาตั้งยกรถ: Once the vehicle is at the desired height, immediately place appropriately rated jack stands under the vehicle's designated support points. Lower the vehicle slowly until it rests securely on the jack stands.
7. ถอดแจ็คออก: Once the vehicle is safely supported by jack stands, lower the floor jack completely and remove it from under the vehicle.

Figure 3: The jack pad correctly positioned on a floor jack, engaging with a vehicle's pinch weld for safe lifting.

6. การบำรุงรักษา

Proper maintenance will extend the life of your Torin BIG RED AT825010-9B Floor Jack Rubber Pad:

• การทำความสะอาด: After each use, wipe the rubber pad clean with a damp cloth to remove any dirt, oil, or debris. Avoid using harsh chemicals or solvents that could degrade the rubber material.
• การตรวจสอบ: Regularly inspect the pad for any signs of wear, cuts, cracks, or hardening of the rubber. Pay close attention to the slotted areas and edges.
• พื้นที่จัดเก็บ: Store the jack pad in a clean, dry place away from direct sunlight, extreme temperatures, and corrosive substances.
• การทดแทน: If the jack pad shows any signs of significant wear, damage, or loss of elasticity, replace it immediately to ensure continued safety and effectiveness.

7 การแก้ไขปัญหา

This section addresses common issues you might encounter with the jack pad.

8. ข้อมูลจำเพาะ

9. ข้อมูลการรับประกัน

ผลิตภัณฑ์นี้มาพร้อมกับ Limited 1-year manufacturer warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official documentation provided with your purchase or contact the manufacturer directly.

10. การสนับสนุนลูกค้า

For technical assistance, questions about product usage, or warranty claims, please contact Torin customer support. Contact information can typically be found on the product packaging or the manufacturer's official webเว็บไซต์.

Manufacturer Contact Information: ISSAQUAH, WA, 98027 US