1. บทนำ
This manual provides detailed instructions for the installation, operation, and maintenance of your EMTEK Sectional Lafayette Grip Tubular Entry Set, model 461212. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your door hardware.
The EMTEK Sectional Lafayette Grip Tubular Entry Set is a single cylinder handleset designed for exterior doors, featuring a Lafayette grip and a Normandy lever. It is constructed from alloy steel with a matte finish, offering both durability and aesthetic appeal.
Image 1: EMTEK Sectional Lafayette Grip Tubular Entry Set, showing the full exterior handleset with Lafayette grip and interior Normandy lever.
2. การตั้งค่าและการติดตั้ง
Proper installation is crucial for the security and functionality of your entry set. Ensure you have all components and necessary tools before starting.
2.1 การเตรียมประตู
- The entry set requires a standard 2 1/8 inch (54mm) door bore preparation.
- Standard door thickness compatibility is 1 3/4 inches to 2 1/8 inches (44mm - 54mm).
2.2 Backset Measurement
The standard latch included is for a 2 3/8 inch (60mm) backset. If your door requires a 2 3/4 inch (70mm) backset, ensure you have the correct latch specified.
2.3 Handing Determination
Correct door handing is essential for the proper function of the lever. Handing is always determined from the ข้างนอก ของประตู
- For an exterior door, the outside is the street or entrance side.
- For an in-swing door, if the hinges are on the left, it is a Left Hand (LH) door. If hinges are on the right, it is a Right Hand (RH) door.
- For an out-swing door, if the hinges are on the left, it is a Right Hand (RH) door. If hinges are on the right, it is a Left Hand (LH) door.
Image 2: Diagram illustrating how to determine door handing (Left Hand or Right Hand) for both in-swing and out-swing doors, always viewจากภายนอก
2.4 ส่วนประกอบที่รวมอยู่
ตรวจสอบว่ามีส่วนประกอบต่อไปนี้ครบถ้วนในแพ็คเกจของคุณ:
- Exterior Lafayette Grip Assembly
- Interior Normandy Lever Assembly
- deadbolt
- Latch (2 3/8" backset standard)
- Strike Plates (Full-Lip and Deadbolt)
- Mounting Screws (1 1/2" Rosette Screws, 2 1/4" Deadbolt Mounting Screws)
- Spindles (Outside Entry Spindle, Inside Passage Half Spindle)
- C Keyway Cylinder and Keys
3. คู่มือการใช้งาน
The EMTEK Sectional Lafayette Grip Tubular Entry Set operates as a single cylinder key lock system.
3.1 Locking and Unlocking from Exterior
- To lock the deadbolt: Insert the key into the exterior cylinder and turn to engage the deadbolt. Remove the key.
- To unlock the deadbolt: Insert the key into the exterior cylinder and turn to retract the deadbolt.
- To open the latch: Depress the exterior Lafayette grip thumb-press.
3.2 Locking and Unlocking from Interior
- To lock the deadbolt: Rotate the interior thumb-turn to engage the deadbolt.
- To unlock the deadbolt: Rotate the interior thumb-turn to retract the deadbolt.
- To open the latch: Depress the interior Normandy lever.
4. การดูแลรักษา
To maintain the appearance and functionality of your EMTEK entry set, follow these guidelines:
- การทำความสะอาด: Clean the hardware with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishing agents, as these can damage the matte finish.
- การหล่อลื่น: Periodically apply a small amount of graphite-based lubricant to the keyway and internal mechanisms of the deadbolt and latch to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
- การตรวจสอบ: Regularly check all screws and fasteners to ensure they are tight. Loose components can affect performance and security.
- การปกป้องพื้นผิว: The matte finish is durable, but prolonged exposure to harsh weather conditions may affect its appearance over time.
5 การแก้ไขปัญหา
If you encounter issues with your entry set, refer to the following common problems and solutions:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Key turns but deadbolt does not engage/retract. | Misalignment of deadbolt or internal mechanism issue. | Check deadbolt alignment with strike plate. Ensure all mounting screws are tight. If issue persists, contact support. |
| Lever/grip is stiff or difficult to operate. | ขาดสารหล่อลื่นหรือมีสิ่งสกปรกอุดตันในกลไก | Apply graphite lubricant to the latch mechanism. Clean any visible debris. |
| ประตูไม่สามารถปิดล็อคได้สนิท | กลอนประตูหรือแผ่นรับกลอนไม่ตรงแนว | Adjust the strike plate position on the door frame. Ensure the latch bolt extends fully. |
| Keys are difficult to insert or turn. | Keyway is dirty or needs lubrication. | Apply graphite lubricant into the keyway. Ensure the key is not bent or damaged. |
If these solutions do not resolve the issue, please contact EMTEK customer support for further assistance.
6. ข้อมูลจำเพาะ
Detailed specifications for the EMTEK Sectional Lafayette Grip Tubular Entry Set, model 461212:
- หมายเลขรุ่น: 461212
- วัสดุ: เหล็กอัลลอยด์
- เสร็จสิ้นภายนอก: Flat Black Steel (FBS) / Matte
- ชนิดล็อค : Single Cylinder Key Lock
- การวางแนวมือ: Right Handed (RH) (as per product variant)
- Standard Door Prep: 2 1/8 inches (54mm) bore
- Standard Backset: 2 3/8 inches (60mm) (2 3/4 inches optional)
- ความหนามาตรฐานของประตู: 1 3/4 inches - 2 1/8 inches (44mm - 54mm)
- Exterior Projection: 3 นิ้ว (76 มม.)
- Overall Grip Thickness: 3/4 นิ้ว (19 มม.)
- Clearance between door & grip: 1 5/8 นิ้ว (41 มม.)
- Plates Thickness: 1/2 นิ้ว (13 มม.)
- Lever Dimensions: 4 1/2 inches (114mm) length x 2 3/4 inches (70mm) projection x 2 inches (51mm) clearance
- น้ำหนักสินค้า: ประมาณ 2.5 ปอนด์ (1.13 กก.)
- ส่วนประกอบที่รวมอยู่: Deadbolt, Latch, Lock, Screws
Image 3: Detailed dimensional drawing of the EMTEK Sectional Lafayette Grip and standard interior trim, including key measurements for installation.
7. การรับประกันและการสนับสนุน
For information regarding product warranty, returns, or technical support, please contact EMTEK Products Inc. directly or refer to their official webไซต์ โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ
ผู้ผลิต: EMTEK Products Inc.