การแนะนำ
The Aerocool Duo 12 Pro Pack provides an advanced cooling solution for your computer system, featuring three 120mm Addressable RGB (ARGB) fans, an H66F RGB fan hub, and a remote control. This system is designed to enhance both the aesthetic and thermal performance of your PC with vibrant lighting and efficient airflow.
This manual provides detailed instructions for the installation, operation, and maintenance of your Aerocool Duo 12 Pro Pack to ensure optimal performance and longevity.
เนื้อหาแพ็คเกจ
ก่อนดำเนินการติดตั้ง โปรดตรวจสอบให้แน่ใจว่ามีส่วนประกอบทั้งหมดอยู่ในบรรจุภัณฑ์ของคุณ:
- 3 x Aerocool Duo 12 ARGB 120mm Fans
- 1 x H66F RGB Fan Hub
- 1 x รีโมทคอนโทรล
- สกรูยึด
- Cables for connection (6-pin fan connectors, 5V ARGB connector)

Image: The Aerocool Duo 12 Pro Pack showing three ARGB fans and the included remote control.
การติดตั้งและการตั้งค่า
Follow these steps to properly install your Aerocool Duo 12 Pro Pack fans and hub into your computer system.
1. เตรียมความพร้อมระบบของคุณ
- ตรวจสอบให้แน่ใจว่าคอมพิวเตอร์ของคุณปิดอยู่และถอดปลั๊กออกจากเต้าเสียบที่ผนัง
- Open your computer case to access the internal components.
2. Install the Fans
- Identify suitable 120mm fan mounting locations within your PC case (e.g., front, top, rear).
- Position each fan in the desired location, ensuring correct airflow direction (typically, the side with the frame supports is the exhaust side).
- Secure each fan using the provided mounting screws. The anti-vibration pads on the fan corners help reduce noise.

Image: A single Aerocool Duo 12 ARGB fan, highlighting its curved blades and anti-vibration pads.
3. Connect to the H66F RGB Fan Hub
- Locate a suitable mounting spot for the H66F RGB Fan Hub inside your case, away from moving parts and heat sources.
- Connect each 6-pin fan cable from the Aerocool Duo 12 fans to the corresponding 6-pin ports on the H66F RGB Fan Hub. The hub supports up to six 6-pin ARGB fans.
- Connect the 5V ARGB connector from the H66F hub to a compatible 5V ARGB header on your motherboard (if you wish to synchronize lighting with your motherboard's software).
- Connect the SATA power connector from the H66F hub to an available SATA power cable from your power supply unit (PSU). This provides power to the hub and connected fans/LEDs.

Image: The Aerocool Duo 12 Pro fans, H66F RGB fan hub, and remote control arranged on a desk, illustrating the components of the system.
คำแนะนำการใช้งาน
Once installed, you can control the fan speed and lighting effects using the included remote control or compatible motherboard software.
การใช้รีโมทคอนโทรล
The remote control allows for easy adjustment of lighting modes, colors, and fan speeds without needing to open your PC case or use software.
- ปุ่มเปิด/ปิด: Turns the LED lighting on or off.
- ปุ่ม PWM: Cycles through fan speed modes (e.g., Silent, Standard, Performance).
- ปุ่มโหมด: Changes the ARGB lighting effect mode.
- ปุ่มสี: Selects static colors or color cycling effects.
- ปุ่มปรับความเร็ว +/- ปรับความเร็วของเอฟเฟกต์แสงแบบไดนามิก
- BRIGHTNESS +/- Buttons: Adjusts the brightness of the LED lighting.
- ปุ่มอัตโนมัติ: Initiates an automatic cycle through all available lighting effects.
Motherboard Synchronization
If the H66F hub is connected to a 5V ARGB header on a compatible motherboard, you can control the lighting effects through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). This allows for synchronized lighting across your entire system.
การซ่อมบำรุง
Regular maintenance ensures optimal performance and extends the lifespan of your Aerocool Duo 12 Pro fans.
- การทำความสะอาด: Periodically clean the fan blades and frames to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the system is powered off and unplugged before cleaning.
- แผ่นรองกันสั่น: The integrated anti-vibration pads are designed for durability. Inspect them occasionally for wear and tear, though replacement is rarely needed.
- การจัดการสายเคเบิล: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components, which can cause noise or damage.
การแก้ไขปัญหา
If you encounter issues with your Aerocool Duo 12 Pro Pack, refer to the following common problems and solutions:
พัดลมไม่หมุน
- การเชื่อมต่อไฟฟ้า: Verify that the H66F RGB Fan Hub's SATA power connector is securely connected to your PSU.
- การเชื่อมต่อพัดลม: Ensure all 6-pin fan cables are firmly connected to the H66F hub.
- ฟังก์ชันการทำงานของฮับ: Check if the hub itself is receiving power (some hubs have an indicator LED).
ไฟ RGB ไม่ทำงานหรือไม่ถูกต้อง
- การเชื่อมต่อ ARGB: Confirm the 5V ARGB connector from the H66F hub is correctly plugged into a compatible 5V ARGB header on your motherboard (not a 12V RGB header, which can cause damage).
- รีโมทคอนโทรล: Ensure the remote control has a working battery and is pointed towards the hub or a clear line of sight. Try pressing the power button on the remote.
- ซอฟต์แวร์เมนบอร์ด: If using motherboard software, ensure it is up-to-date and correctly configured to control the ARGB header.
- ปุ่มควบคุม LED: If your system has an external LED control button connected to the hub, try using it to cycle through effects.
เสียงดังเกินไป
- การติดตั้ง: Ensure fans are securely mounted and not vibrating against the case. The anti-vibration pads should minimize this.
- สิ่งกีดขวาง: ตรวจสอบดูว่ามีสายไฟหรือสิ่งของใดกีดขวางใบพัดลมหรือไม่
- การสะสมของฝุ่น: Clean the fans as described in the Maintenance section.
- ความเร็วพัดลม: Adjust fan speed using the remote control or motherboard software to a lower setting if noise is a concern.
ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | แอร์โรคูล |
| แบบอย่าง | DUO12PRO |
| ขนาดพัดลม | 120มม. |
| ประเภทตัวเชื่อมต่อกระแสไฟ | ขั้วต่อ 6 พิน (สำหรับพัดลมเชื่อมต่อกับฮับ) |
| ตัวเชื่อมต่อพลังงานฮับ | ซาต้า |
| ขั้วต่อ ARGB | 5V ARGB (3-pin) |
| เล่มที่tage | 5 Volts (LEDs), 12 Volts (Fan Motor) |
| วิธีการทำความเย็น | อากาศ |
| อุปกรณ์ที่รองรับ | คอมพิวเตอร์ตั้งโต๊ะ |
| ระดับเสียง | 19.7 เดซิเบล (dB) |
| ความเร็วการหมุนสูงสุด | 2000 รอบต่อนาที |
| วัสดุ | โพลีคาร์บอเนต |
| น้ำหนักสินค้า | 420 Grams (Total Pack) |
| LEDs per Fan | 18 (Double RGB LED Ring) |
การรับประกันและการสนับสนุน
Aerocool products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to the following information.
- ระยะเวลารับประกัน: The EU spare part availability duration is 2 years. Please check your local retailer or Aerocool's official website for specific warranty terms in your region.
- การสนับสนุนด้านเทคนิค: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Aerocool customer support through their official webเว็บไซต์.
- หลักฐานการซื้อ: เก็บหลักฐานการซื้อของคุณไว้เพื่อใช้ยืนยันการรับประกัน