คู่มือการใช้งานคันโยกหักเหล็กขนาด 18 นิ้ว MAXPOWER

สินค้าเกินview

The MAXPOWER 18-Inch Breaker Bar is a robust hand tool designed for applying significant torque to loosen stubborn fasteners. It features a dual-drive flexible head, allowing for versatile use with both 1/2-inch and 3/8-inch sockets.

Image: The MAXPOWER 18-Inch Breaker Bar, showcasing its chrome-plated finish and flexible head.

คุณสมบัติหลัก

• Dual 1/2-inch and 3/8-inch drive heads for versatile use.
• 360-degree rotating Cr-Mo drive head for access at any angle.
• 3/8-inch drive head delivers up to 202 N.m (149 lb.ft) of torque.
• 1/2-inch drive head delivers up to 512 N.m (378 lb.ft) of torque.
• Constructed from forged and hardened chrome vanadium steel for durability.
• Smoothly contoured, round profile handle for a comfortable and secure grip.
• Spring-loaded ball bearing mechanism to securely retain sockets.
• Effective for breaking loose rusted or stuck nuts and bolts.

Image: An illustration highlighting the 18-inch length of the breaker bar and the dual 1/2-inch and 3/8-inch drive sizes on the flexible head.

ภาพ: รายละเอียด views of the breaker bar's flexible head, showing the spring-loaded ball mechanism that holds sockets in place.

Image: A visual representation of the breaker bar's head rotating 360 degrees, illustrating its flexibility.

Image: A hand demonstrating the comfortable grip on the breaker bar's handle.

การตั้งค่า

1. เลือกช่องเสียบที่ถูกต้อง: Choose a socket that matches the size of the fastener you intend to loosen. Ensure it is either a 1/2-inch or 3/8-inch drive socket, compatible with the breaker bar's dual head.
2. ติดตั้งซ็อกเก็ต: Align the square drive of the socket with the appropriate drive size (1/2-inch or 3/8-inch) on the breaker bar's flexible head. Push the socket firmly onto the drive until the spring-loaded ball bearing engages, securing the socket in place.
3. ปรับมุมหัว: The 360-degree flexible head allows you to pivot the socket to the desired angle for optimal access to the fastener. Adjust the head to ensure a straight and secure connection with the fastener.

Video: This video demonstrates the features of the MAXPOWER Breaker Bar, including its dual-drive capability, flexible head, and comfortable grip, as well as its application in loosening fasteners.

คำแนะนำการใช้งาน

1. วางตำแหน่งเครื่องมือ: Place the attached socket onto the fastener, ensuring it is fully seated and not at an angle that could strip the fastener or socket.
2. ใช้ประโยชน์จากจุดแข็ง: Grip the breaker bar firmly with both hands. For maximum leverage, position your hands towards the end of the handle.
3. Loosen Fastener: ทาให้สม่ำเสมอ เพิ่มasing pressure in the counter-clockwise direction (for standard right-hand threads) to loosen the fastener. The long handle of the breaker bar provides significant mechanical advantage, reducing the force required.
4. ข้อควรระวังเพื่อความปลอดภัย: Avoid using additional "cheater bars" or pipes over the handle, especially with the 1/2-inch drive head, as this can exceed the tool's design limits and cause damage or injury. The breaker bar is designed to provide sufficient torque on its own.

Image: A person using the MAXPOWER Breaker Bar to loosen a lug nut on a car wheel, demonstrating the application of leverage.

การซ่อมบำรุง

To ensure the longevity and optimal performance of your MAXPOWER Breaker Bar, follow these maintenance guidelines:

• การทำความสะอาด: After each use, wipe down the breaker bar with a clean, dry cloth to remove dirt, grease, and debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
• การหล่อลื่น: Periodically apply a light coat of machine oil or rust preventative to the chrome-plated surfaces and the flexible head mechanism to prevent corrosion and ensure smooth operation.
• พื้นที่จัดเก็บ: Store the breaker bar in a dry environment, away from excessive moisture or corrosive chemicals. A tool chest or wall-mounted rack is ideal for protection.
• การตรวจสอบ: Regularly inspect the breaker bar for any signs of wear, damage, or deformation. Pay close attention to the drive heads and the flexible joint. Discontinue use if any damage is observed.

การแก้ไขปัญหา

Socket Falls Off:

If the socket does not stay securely on the drive head, check the spring-loaded ball bearing. Ensure it is clean and moves freely. If the ball bearing is worn or damaged, it may not provide sufficient retention. While this is a rare occurrence with quality tools, if it persists, contact customer support.

Fastener Remains Stuck:

For extremely rusted or seized fasteners, ensure you are applying steady, increasing force. Avoid sudden jerking motions. If the fastener still won't budge, consider applying penetrating oil and allowing it to soak for some time before attempting again. In some cases, heat may be required, but this should only be done by experienced individuals with appropriate safety measures.

Chrome Plating Peeling/Flaking:

While the chrome plating is designed for durability and corrosion resistance, excessive force or impact can sometimes cause it to chip or flake. This is typically cosmetic and does not affect the structural integrity of the tool unless the underlying metal is also damaged. Ensure proper use and avoid dropping the tool.

ข้อมูลจำเพาะ

Note: While some product data may list Aluminum, the primary construction material for this high-torque tool is Forged and hardened Chrome Vanadium Steel, as indicated by its performance capabilities.

การรับประกันและการสนับสนุน

For warranty information, product support, or to inquire about replacement parts, please refer to the official MAXPOWER webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ

Official MAXPOWER Webเว็บไซต์: Visit MAXPOWER Store on Amazon