1. สินค้าหมดview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
รูปที่ 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. คำแนะนำด้านความปลอดภัย
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
ความปลอดภัยทั่วไป
- สวมอุปกรณ์ป้องกันส่วนบุคคล (PPE) ที่เหมาะสมเสมอ เช่น แว่นตานิรภัยและถุงมือ
- ตรวจสอบให้แน่ใจว่าปั๊มวางอยู่บนพื้นผิวที่มั่นคงและระดับเพื่อป้องกันการพลิกคว่ำ
- ให้เด็กและบุคคลที่ไม่ได้รับอนุญาตอยู่ห่างจากพื้นที่ปฏิบัติงาน
- ห้ามใช้งานปั๊มในสภาพแวดล้อมที่อาจเกิดการระเบิดได้ เช่น บริเวณที่มีของเหลวไวไฟ ก๊าซ หรือฝุ่นละออง
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
ความปลอดภัยทางไฟฟ้า
- ตรวจสอบแหล่งจ่ายไฟ voltage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. เนื้อหาบรรจุภัณฑ์
โปรดตรวจสอบว่าสิ่งของทั้งหมดที่ระบุไว้ด้านล่างครบถ้วนและไม่เสียหายเมื่อแกะกล่อง:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x สวิตช์ความดัน
- 1 x Stainless Steel Hose
- เครื่องวัดความดัน 1 ชิ้น
- 1 x Three-way Brass Fitting
- คู่มือการใช้งาน (เอกสารนี้)
4. ข้อมูลจำเพาะทางเทคนิค
| ข้อมูลจำเพาะ | ค่า |
|---|---|
| หมายเลขรุ่น | TWP47506 |
| พิมพ์ | Self-priming Automatic Jet Pump |
| กำลังไฟที่กำหนด | 750 วัตต์ (1.0 แรงม้า) |
| เล่มที่tage | 220-240โวลต์ |
| ความถี่ | 50เฮิรตซ์ |
| แม็กซ์ เฮด | 45 เมตร |
| การไหลสูงสุด | 60 ลิตร/นาที |
| ดูดสูงสุด | 9 เมตร |
| เส้นผ่านศูนย์กลางท่อ | 1 x 1 นิ้ว |
| ประเภทมอเตอร์ | Copper Wire Induction Motor (Brushless) |
| วัสดุใบพัด | สแตนเลส |
| ปั๊มซีasinวัสดุ g | เหล็กหล่อ |
| ความยาวสายเคเบิล | 0.3 เมตร |
| Tank Capacity (Cylindrical) | 24 ลิตร |
| ขนาดสินค้า (กว้าง x ยาว x สูง) | 30 x 19 x 22 ซม. |
| น้ำหนักสินค้า | 1.5 กก. |
| สี | เงิน |
5. การตั้งค่าและการติดตั้ง
5.1 การจัดวาง
- Position the pump on a firm, level, and dry surface.
- Ensure adequate ventilation around the pump to prevent overheating.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 การเชื่อมต่อท่อ
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- ท่อดูด: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- ท่อระบาย: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 การเตรียมปั๊ม
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing with clean water until it overflows.
- ใส่ปลั๊กสำหรับเติมน้ำกลับเข้าไปและขันให้แน่นสนิท
- Open any valves on the discharge side to allow air to escape during startup.
5.4 การเชื่อมต่อไฟฟ้า
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. การดำเนินการ
6.1 การสตาร์ทปั๊ม
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 การทำงานอัตโนมัติ
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 การหยุดปั๊ม
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. การบำรุงรักษา
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 การตรวจสอบตามปกติ
- ตรวจสอบสายไฟและปลั๊กว่ามีร่องรอยความเสียหายหรือไม่
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- โปรดสังเกตเสียงผิดปกติระหว่างการใช้งาน ซึ่งอาจบ่งชี้ถึงปัญหาได้
7.2 การทำความสะอาด
เช็ดด้านนอกของปั๊มด้วยโฆษณาamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 การเตรียมความพร้อมสำหรับฤดูหนาว (สำหรับสภาพอากาศหนาวเย็น)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- ตัดการเชื่อมต่อแหล่งจ่ายไฟ
- Drain all water from the pump casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- เก็บปั๊มไว้ในที่แห้งและไม่มีน้ำค้างแข็ง
8 การแก้ไขปัญหา
ก่อนติดต่อฝ่ายสนับสนุนลูกค้า โปรดดูตารางต่อไปนี้เพื่อดูปัญหาทั่วไปและวิธีแก้ไข
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| ปั๊มไม่ทำงาน | ไม่มีแหล่งจ่ายไฟ สายไฟ/ปลั๊กชำรุด ระบบป้องกันมอเตอร์โอเวอร์โหลดทำงาน |
ตรวจสอบการเชื่อมต่อสายไฟและเต้าเสียบ ตรวจสอบและเปลี่ยนใหม่หากได้รับความเสียหาย Allow motor to cool, then restart. Check for blockages. |
| ปั๊มทำงานแต่ไม่มีน้ำไหลออกมา | ปั๊มไม่ได้ลงสีรองพื้น อากาศรั่วในท่อดูด แรงดูดสูงเกินไป Foot valve clogged or stuck Water source empty |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| อัตราการไหลหรือแรงดันต่ำ | Partial blockage in pipes/impeller อากาศรั่วในท่อดูด ใบพัดที่สึกหรอ Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections ติดต่อเจ้าหน้าที่บริการที่มีคุณสมบัติเหมาะสม Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| ปั๊มทำงานและหยุดทำงานบ่อยครั้ง | Leak in discharge system Pressure tank pre-charge incorrect สวิตซ์แรงดันเสีย |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. การรับประกันและการสนับสนุน
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.