ACC Automotive Carpet Installation and Care Manual

1. บทนำ

This manual provides detailed instructions for the installation and care of your ACC Automotive Carpet. This product is specifically designed for 1977 to 1985 Oldsmobile Delta 88 4-door models. The carpet is manufactured from 8288-Cinnabar Plush Cut Pile material, custom-formed to fit the original floor pan of your vehicle.

ภาพที่ 1.1: Swatch of the 8288-Cinnabar Plush Cut Pile carpet material. This image represents the actual color of your product.

Please read all instructions thoroughly before beginning the installation process.

2. ข้อมูลด้านความปลอดภัย

WARNING: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Always wear appropriate safety gear, such as gloves and eye protection, when handling tools and performing installation tasks. Ensure your work area is well-lit and free from obstructions.

3. เนื้อหาบรรจุภัณฑ์

Your ACC Automotive Carpet package should contain the following items:

• One (1) ACC Automotive Carpet, custom-formed for 1977-1985 Oldsmobile Delta 88 (4-Door).
• Jute padding, heat-bonded to the backside of the carpet in the foot area.
• A heel pad, welded to the correct location on the carpet.

ภาพที่ 3.1: เกินview of the automotive carpet. Note: The color shown in this image is for illustrative purposes of the carpet's shape and features; your carpet will be Cinnabar.

4. คำแนะนำในการติดตั้ง

READ FULL INSTRUCTIONS BEFORE BEGINNING. Instructions may vary for multi-piece sets. The carpet is heat and pressure formed using a mold created from the original floor pan, ensuring a precise fit when installed correctly.

1. การตระเตรียม: Remove the new carpet from its packaging. Lay it flat in a clean, open area to allow it to relax and regain its original contours. This may take a few hours. Inspect the material for accuracy and any shipping damage.
2. การเปรียบเทียบ: Compare the new carpet with your old carpet (if available). The old carpet can serve as a template for console cuts or other specific vehicle features.
3. ตำแหน่งเริ่มต้น: Fold the new carpet in half from front to rear. Carefully place it into the vehicle, aligning the molded contours with seat risers or other identifiable starting points on the floor. Ensure proper alignment.
4. Forward Section Fitting: Roll the carpet forward towards the front of the vehicle. Make necessary cuts for brackets, shifters, vents, and other obstructions while maintaining proper alignment with your chosen starting points.
5. Firewall Cut: Cut the carpet in the center at the firewall to allow it to extend underneath the dashboard.
6. Continuing Installation: Continue the same procedure, working your way towards the outer edges of the vehicle floor.
7. Final Trimming: Once the carpet is properly fitted and aligned, you can perform the final trimming around the outer edges, seat belt openings, and other necessary holes. Note that holes may not be pre-cut and will require trimming during installation.

ภาพที่ 4.1: มุม view of the carpet, illustrating the molded contours designed for vehicle fitment. Color is for illustration only.

ภาพที่ 4.2: Detail of the welded heel pad, designed for durability in high-wear areas. Color is for illustration only.

Optional Adhesive: If adhesive is desired for a more permanent installation, apply only a light brush or spray adhesive หลังจาก a correct dry fit has been achieved and confirmed.

5. การบำรุงรักษาและการดูแล

To ensure the longevity and appearance of your ACC Automotive Carpet, follow these general care guidelines:

• การดูดฝุ่นเป็นประจำ: Vacuum the carpet regularly to remove dirt, dust, and debris.
• การทำความสะอาดเฉพาะจุด: For spills or stains, blot immediately with a clean cloth. Use a mild automotive carpet cleaner according to the product's instructions. Avoid saturating the carpet.
• ทำความสะอาดล้ำลึก: Periodically, a deeper cleaning can be performed using a carpet extractor or professional cleaning services. Ensure the carpet is thoroughly dried after any wet cleaning to prevent mildew.
• หลีกเลี่ยงสารเคมีที่รุนแรง: Do not use harsh chemicals, bleach, or abrasive cleaners, as these can damage the carpet fibers and color.

6 การแก้ไขปัญหา

6.1. Fitment Issues

If the carpet does not appear to fit correctly:

• Ensure the carpet has had sufficient time to relax and regain its original shape after unpacking.
• Double-check that you are aligning the carpet with the correct starting points (e.g., seat risers) as described in the installation steps.
• Remember that trimming around edges and cutting holes for various components is a standard part of the installation process. The carpet is designed to be trimmed for a custom fit.

6.2. Color Matching Concerns

The product is manufactured in 8288-Cinnabar Plush Cut Pile. If you are unsure about the color or material, it is recommended to contact ACC directly to request free samples before ordering to ensure a precise match for your vehicle's interior.

7. ข้อมูลจำเพาะผลิตภัณฑ์

8. การรับประกันและการสนับสนุน

ACC Automotive Carpet is guaranteed against manufacturing defects. For specific warranty details or technical support, please refer to the official ACC website or contact their customer service department directly. When contacting support, please have your product model number (1810-8288) and purchase information available.