Caso Design HW.500

Caso Design HW.500 Touch Turbo Hot Water Dispenser

คู่มือการใช้งาน

Model: HW.500 | Brand: Caso Design

การแนะนำ

The Caso Design HW.500 Touch Turbo Hot Water Dispenser is engineered for efficiency and convenience, providing hot water to your desired temperature in seconds. This manual provides essential information for the safe and effective use of your appliance.

คุณสมบัติหลัก:

  • Heats water to a boil (212°F) in approximately 8 seconds.
  • Equipped with a powerful 1800-watt heating element.
  • Intuitive sensor-touch control panel for ease of use.
  • Offers 6 adjustable temperatures for various beverages.
  • Features 4 adjustable cup sizes to accommodate different needs.
Caso Design HW.500 Hot Water Dispenser, angled view

รูปที่ 1: มุม view of the Caso Design HW.500 Hot Water Dispenser.

การตั้งค่า

  1. การแกะกล่อง: Carefully remove all packaging materials and inspect the dispenser for any damage. Retain packaging for future transport if needed.
  2. การจัดวาง: วางเครื่องใช้ไฟฟ้าบนพื้นผิวที่มั่นคง เรียบ และทนความร้อน ห่างจากแสงแดดโดยตรงและแหล่งความร้อน ตรวจสอบให้แน่ใจว่ามีการระบายอากาศที่เพียงพอรอบๆ เครื่อง
  3. การทำความสะอาดเบื้องต้น: Before first use, clean the water tank and drip tray with warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the unit with a damp ผ้า.
  4. การติดตั้งถังเก็บน้ำ: Fill the removable water tank with fresh, cold tap water up to the MAX line. Ensure the water filter is correctly inserted into the tank. Place the filled water tank securely onto the base of the dispenser.
  5. การเชื่อมต่อไฟฟ้า: เสียบสายไฟเข้ากับเต้ารับไฟฟ้าที่มีสายดิน หน้าจอจะสว่างขึ้น แสดงว่าเครื่องพร้อมใช้งานแล้ว
  6. วงจรการใช้ครั้งแรก: It is recommended to run at least two full cycles of hot water (at the highest temperature setting) without consuming the water to flush out any manufacturing residues.
Caso Design HW.500 Hot Water Dispenser with water tank visible

รูปที่ 2: ด้านข้าง view showing the transparent water tank with water level markings.

คำแนะนำการใช้งาน

  1. เปิดเครื่อง: Ensure the dispenser is plugged in and the water tank is filled. The digital display will show the current status.
  2. เลือกอุณหภูมิ: Use the temperature selection buttons on the sensor-touch control panel to choose your desired water temperature. Available temperatures typically range from 100°F to 212°F (boiling).
  3. Select Cup Size (if applicable): If your model supports adjustable cup sizes, use the corresponding buttons to select the volume of water to dispense.
  4. จ่ายน้ำ: Place a cup or container on the drip tray. Press the dispense button. The unit will rapidly heat and dispense the selected amount of water at the chosen temperature.
  5. หยุดการจ่ายยา: To stop dispensing water before the selected volume is reached, press the dispense button again.
  6. ล็อคความปลอดภัย: Some models include a safety lock feature. Refer to the display icons for activation and deactivation to prevent accidental dispensing.
Close-up of the Caso Design HW.500 control panel with digital display and touch buttons

รูปที่ 3: รายละเอียด view of the sensor-touch control panel for temperature and dispense settings.

การซ่อมบำรุง

การทำความสะอาด

  • ภายนอก: เช็ดภายนอกด้วยผ้านุ่มๆamp ผ้า ห้ามใช้น้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือจุ่มตัวเครื่องลงในน้ำ
  • ถาดรองน้ำหยด: Regularly empty and clean the drip tray. It is removable for easy cleaning.
  • ถังเก็บน้ำ: Clean the water tank periodically with warm, soapy water. Rinse thoroughly to remove all soap residue.
Removable drip tray of the Caso Design HW.500 Hot Water Dispenser

Figure 4: The removable drip tray for easy cleaning and maintenance.

ขจัดคราบตะกรัน

Mineral deposits (limescale) can build up over time, affecting performance. Descale your dispenser regularly, especially in areas with hard water.

  • Use a commercial descaling solution suitable for hot water dispensers, following the manufacturer's instructions.
  • อีกทางเลือกหนึ่งคือ สามารถใช้น้ำส้มสายชูขาวผสมกับน้ำ (อัตราส่วน 1:1) ได้
  • Run the descaling solution through the unit, then rinse by running several cycles of fresh water.

การเปลี่ยนตัวกรอง

The water filter should be replaced according to the manufacturer's recommendations or if you notice a decrease in water quality or flow rate. Refer to the filter packaging for specific instructions.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีน้ำดื่มให้บริการถังน้ำว่างหรือไม่ได้ติดตั้งอย่างถูกต้องFill water tank or ensure it is correctly installed.
น้ำไม่ร้อนพอIncorrect temperature setting. Limescale buildup.Adjust temperature setting. Descale the unit.
น้ำไหลช้า.Limescale buildup. Clogged filter.Descale the unit. Replace the water filter.
เครื่องไม่เปิดติดไม่ได้เสียบปลั๊ก ไฟดับtage.Check power connection. Verify power supply.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ยี่ห้อแคโซ ดีไซน์
หมายเลขรุ่นHW.500
ขนาดสินค้า (ลึก x กว้าง x สูง)10.7" x 6.6" x 12.05"
ความจุApproximately 4.6 Pounds (equivalent to 2.1 Liters)
สีสีดำ
วัสดุพลาสติก
วัดtage1800 วัตต์
เล่มที่tage120 โวลต์
อินพุตอินเทอร์เฟซมนุษย์หน้าจอสัมผัส
ประเภทตัวกรองสามารถนำกลับมาใช้ใหม่ได้
ส่วนประกอบที่รวมอยู่Hot water dispenser, 1 water filter, manual, warranty
Dimensions of the Caso Design HW.500 Hot Water Dispenser

Figure 5: Product dimensions for placement and space planning.

การรับประกันและการสนับสนุน

This Caso Design HW.500 Hot Water Dispenser comes with a การรับประกันแบบ จำกัด 12 เดือน นับจากวันที่ซื้อ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในการเคลมประกัน

For technical support, service, or to inquire about replacement parts, please contact Caso Design customer service. You can find contact information and additional resources on the official Caso Design webเว็บไซต์หรือผ่านผู้ค้าปลีกของคุณ

เยี่ยมชม Caso Design Store สำหรับข้อมูลเพิ่มเติม

© 2026 Caso Design สงวนลิขสิทธิ์ทุกประการ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.