Wiltec Aluminum Motorcycle Rear Wheel Stand

1. สินค้าหมดview

The Wiltec Aluminum Motorcycle Rear Wheel Stand, Model 61119, is an essential tool designed to provide stable and secure support for your motorcycle's rear wheel. This stand facilitates various tasks including parking, routine maintenance, and repairs. Its lightweight aluminum construction ensures ease of handling while offering robust support for motorcycles up to 317 kg. The design allows for effortless lifting and movement of the motorcycle, making tasks like chain lubrication, tire inspection, rim cleaning, and tire changes significantly simpler.

Figure 1: Fully assembled Wiltec Aluminum Motorcycle Rear Wheel Stand.

2. ข้อมูลด้านความปลอดภัย

Please read and understand all safety instructions before using the Wiltec Motorcycle Rear Wheel Stand. Failure to follow these instructions may result in injury or damage to the product or motorcycle.

• Always ensure the stand is placed on a firm, level, and stable surface.
• รับน้ำหนักได้ไม่เกิน 317 กก.
• Verify that the motorcycle's swingarm width is within the compatible range of 255 mm to 360 mm before use.
• Ensure the motorcycle is stable and balanced before attempting to lift it.
• Never leave a motorcycle unattended on the stand, especially in areas where it could be bumped or disturbed.
• ขณะยกหรือลดระดับสิ่งของ ควรระวังอย่าให้มือและเท้าอยู่ใกล้ชิ้นส่วนที่กำลังเคลื่อนไหว
• Wear appropriate personal protective equipment, such as gloves, when handling the stand and motorcycle.

3. เนื้อหาบรรจุภัณฑ์

Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact Wiltec customer support immediately.

• Main aluminum frame
• Two support arms with adjustable hooks/pads
• Two smooth-rolling wheels (pre-installed or requiring attachment)
• Assembly hardware (bolts, nuts, washers, if required)
• คู่มือการใช้งาน

4. คำแนะนำในการประกอบ

Follow these steps to assemble your Wiltec Motorcycle Rear Wheel Stand. Assembly is generally straightforward, but ensure all fasteners are securely tightened.

1. แกะส่วนประกอบ: วางชิ้นส่วนทั้งหมดลงบนพื้นผิวที่สะอาดและเรียบ
2. ติดตั้งแขนค้ำยัน: If not pre-assembled, attach the two support arms to the main frame. Ensure the square plates that secure the 'horns' (hooks/pads) are correctly aligned and the screws are tightened firmly.
3. ติดตั้งล้อ: If the wheels are not pre-installed, attach them to the designated points on the main frame using the provided hardware. Ensure they spin freely.
4. ปรับแขนรองรับ: The support arms are adjustable to accommodate different swingarm widths. Loosen the securing bolts, slide the arms to the desired width (255 mm to 360 mm), and re-tighten the bolts securely.

Figure 2: Detail of the adjustable support arm mechanism.

รูปที่ 3: ด้านข้าง view of the assembled stand, highlighting the frame structure and wheels.

5. คู่มือการใช้งาน

Follow these steps to safely lift and support your motorcycle using the Wiltec Rear Wheel Stand.

1. เตรียมรถจักรยานยนต์: Ensure the motorcycle is in neutral gear and on its side stand or front stand for initial stability.
2. วางตำแหน่งขาตั้ง: Place the rear wheel stand behind the motorcycle's rear wheel. Adjust the width of the support arms to match your motorcycle's swingarm width (between 255 mm and 360 mm).
3. Engage the Swingarm: Carefully slide the stand forward until the hooks/pads on the support arms securely engage with the motorcycle's swingarm bobbins or designated lifting points. Ensure both sides are properly seated.
4. ยกมอเตอร์ไซค์ขึ้น: While holding the motorcycle stable with one hand (or having assistance), firmly press down on the stand's handle at the rear. The stand's leverage will lift the rear wheel off the ground.
5. ตรวจสอบความเสถียร: Once lifted, gently rock the motorcycle to ensure it is stable and securely supported by the stand.
6. ลดระดับมอเตอร์ไซค์: To lower, firmly hold the motorcycle, lift the stand's handle, and carefully guide the rear wheel back to the ground. Remove the stand once the motorcycle is stable.

The smooth-rolling wheels allow for easy repositioning of the motorcycle once it is lifted, facilitating tasks in your workshop or garage.

6. การบำรุงรักษา

Regular maintenance ensures the longevity and safe operation of your Wiltec Motorcycle Rear Wheel Stand.

• การทำความสะอาด: เช็ดขาตั้งด้วยโฆษณาamp cloth after use to remove dirt, grease, and debris. Avoid harsh chemicals that could damage the aluminum finish.
• ตรวจสอบตัวยึด: Periodically check all bolts, nuts, and screws for tightness. Re-tighten any loose fasteners to prevent instability.
• การตรวจสอบล้อ: Ensure the wheels roll smoothly and are free from obstructions. Clean any accumulated dirt or hair from the wheel axles.
• พื้นที่จัดเก็บ: Store the stand in a dry, clean place when not in use to prevent corrosion and damage.

7 การแก้ไขปัญหา

If you encounter issues while using your motorcycle stand, refer to the following common problems and solutions:

• Difficulty Lifting Motorcycle:
  • Ensure the stand's support arms are adjusted to the correct width for your motorcycle's swingarm.
  • Verify that the hooks/pads are properly seated on the swingarm bobbins or lifting points.
  • Confirm the stand is on a level surface, allowing for proper leverage.
• ขาตั้งดูไม่มั่นคง:
  • Check that all assembly bolts are securely tightened.
  • ตรวจสอบให้แน่ใจว่าพื้นผิวดินแน่นและระดับ
  • Confirm the motorcycle's weight does not exceed the stand's 317 kg capacity.
• ล้อไม่หมุนอย่างราบรื่น:
  • Inspect wheels for debris or damage. Clean as necessary.
  • Ensure wheel axles are properly secured.

8. ข้อมูลจำเพาะทางเทคนิค

Figure 4: Dimensional diagram of the motorcycle stand.

9. การรับประกันและการสนับสนุนลูกค้า

Wiltec products are manufactured to high-quality standards. In the unlikely event of a defect or malfunction, please contact Wiltec customer support for assistance. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official Wiltec webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา