BNT Dummy Fake Security Camera (Model BNT-K8FaCam-2PW) Instruction Manual

1. บทนำ

The BNT Dummy Fake Security Camera is designed to provide a realistic visual deterrent against potential intruders. Its appearance closely mimics that of a functional surveillance camera, aiming to reduce the likelihood of criminal activity by creating the impression of active monitoring. This manual provides essential information for the proper setup, operation, and maintenance of your dummy camera.

Image 1.1: Two BNT white dummy fake security cameras, showcasinด้วยการออกแบบที่สมจริง

2. อะไรอยู่ในกล่อง

Upon opening your package, you should find the following components:

• BNT Bullet Simulation Fake Camera (White) x 2
• สกรูสำหรับติดตั้ง
• คู่มือการใช้งาน (เอกสารนี้)
• Warning Security Alert Sticker Decal x 2

Image 2.1: Package contents showing two dummy cameras, warning stickers, and screws.

3. คุณสมบัติ

• การออกแบบที่สมจริง: Mimics the appearance of a real surveillance camera.
• ไฟ LED กระพริบ: Features a built-in red LED light that illuminates at night, simulating active recording.
• เซ็นเซอร์โฟโตอิเล็กทริก: Automatically activates the red LED light in low-light conditions.
• โครงสร้างทนทาน: Made from Acrylonitrile Butadiene Styrene (ABS) for indoor and outdoor use.
• ทนต่อสภาพอากาศ: IP65 International Protection Rating ensures resistance to water.
• ติดตั้งง่าย: No wiring required, mounts easily to ceilings or walls.
• มุมปรับได้: Features 2-axis rotation for flexible positioning (360-degree rotation, 90-degree tilt).
• แหล่งพลังงาน: Operates on 2 AA batteries (not included).

Image 3.1: Close-up of the dummy camera's front, showing the dummy lens, red LED, and rotation capabilities.

4. การตั้งค่าและการติดตั้ง

4.1. การติดตั้งแบตเตอรี่

1. Locate the battery compartment on the camera. This is typically found by sliding open the back cover.
2. ใส่แบตเตอรี่ AA 2 ก้อน (ไม่ได้รวมอยู่ในชุด) ลงในช่องใส่แบตเตอรี่ โดยตรวจสอบให้แน่ใจว่าขั้วบวก/ลบถูกต้อง
3. ปิดช่องใส่แบตเตอรี่ให้แน่น

Image 4.1: Illustration of battery insertion into the dummy camera.

4.2. การติดตั้งกล้อง

The camera can be easily installed on a ceiling or wall using the provided screws. No complex wiring is necessary.

1. Choose a suitable location for installation, considering visibility and desired deterrent effect.
2. Position the mounting base against the surface and mark the screw holes.
3. Drill pilot holes if necessary, then secure the mounting base with the provided screws.
4. ติดกล้องเข้ากับฐานที่ติดตั้ง
5. Adjust the camera's angle using its 2-axis rotation feature to achieve the desired coverage.

Video: BNT Dummy Fake Security Camera Overview

วิดีโอ 4.2.1: วิดีโอนี้ให้ข้อมูลทั่วไปเกี่ยวกับview of the BNT Dummy Fake Security Camera, highlighting its features and realistic appearance.

Video: Protecting Property with Fake Cameras

Video 4.2.2: This video demonstrates how fake cameras can be used to enhance property security and deter potential threats.

5. คู่มือการใช้งาน

The BNT Dummy Fake Security Camera is designed for simple, autonomous operation:

• Once batteries are installed, the built-in photoelectric sensor will detect ambient light levels.
• During daylight hours, the red LED light will remain off.
• As darkness falls, the photoelectric sensor will automatically activate the red LED light, causing it to illuminate. This simulates the operation of a real security camera's night vision or recording indicator.
• The camera provides 24/7 visual deterrence without any manual intervention after initial setup.

Image 5.1: The dummy camera's red LED light is active at night, providing a visual deterrent.

6. การบำรุงรักษา

• การเปลี่ยนแบตเตอรี่: When the red LED light dims or stops illuminating, it is time to replace the batteries. Ensure to use high-quality AA batteries to prevent leakage and damage to the battery case.
• การปกป้องสิ่งแวดล้อม: When replacing batteries, take care to avoid exposing the internal components to rain or moisture to maintain the lifespan of the battery case.
• การกำจัด: Please dispose of used batteries properly according to local regulations to protect the environment.
• การทำความสะอาด: Periodically wipe the camera's exterior with a soft, damp ผ้าเพื่อขจัดฝุ่นและเศษซาก หลีกเลี่ยงการใช้สารเคมีที่รุนแรง

7 การแก้ไขปัญหา

7.1. LED Light Not Illuminating at Night

• ตรวจสอบแบตเตอรี่: Ensure that 2 AA batteries are correctly installed and are not depleted. Replace if necessary.
• Test Photoelectric Sensor: In a dark environment, cover the LED light with your hand. If the red LED light turns on, the product is functioning correctly. If it does not, check battery installation again.
• ปัจจัยด้านสิ่งแวดล้อม: Ensure the camera is not installed in an area with ambient light at night (e.g., streetlights, porch lights) that might prevent the photoelectric sensor from detecting sufficient darkness to activate the LED.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

BNT provides reliable 24-month after-sales service for this product. If you have any questions, concerns, or require assistance with your BNT Dummy Fake Security Camera, please contact our dedicated customer service team. We are committed to ensuring your satisfaction.