Winsome Windsor 2Pc Set RTA Chair, Natural - Instruction Manual

1. สินค้าหมดview

The Winsome Windsor 2Pc Set RTA Chair in Natural finish offers a classic Windsor design, suitable for various home decors. These chairs are designed for dining use and feature a comfortable, contoured seat and sturdy construction.

• เสร็จ: เป็นธรรมชาติ
• วัสดุ: ไม้เนื้อแข็ง
• คุณสมบัติ: Wide, contoured seats; Double cross-bar leg support
• ขนาด : กว้าง 17.72 นิ้ว x ลึก 20.65 นิ้ว x สูง 36.99 นิ้ว
• ความจุน้ำหนัก: 220 ปอนด์

This set includes two (2) Ready-To-Assemble (RTA) chairs. Assembly is required before use.

2. การติดตั้งและการประกอบ

Carefully unpack all components and verify that all parts are present before beginning assembly. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching.

2.1. ส่วนประกอบที่รวมอยู่

• Chair Seat with Backrest (2 units)
• Front Leg Assembly (2 units)
• Rear Leg Assembly (2 units)
• Cross-bar Supports (quantity as per design, typically 4 per chair)
• Hardware Pack (screws, dowels, caps)

Note: The exact number of cross-bar supports may vary slightly based on design. Refer to the included diagram for precise component identification.

2.2. เครื่องมือที่จำเป็น (ไม่รวมอยู่ด้วย)

• Phillips Head Screwdriver or Power Drill with Phillips Bit
• Rubber Mallet (recommended for secure leg insertion)
• Wood Glue (recommended for enhanced stability and longevity)

2.3. ขั้นตอนการประกอบ

1. Identify Leg Assemblies: The chair seat is designed with a slight slant. Ensure the ขายาวขึ้น of the leg assemblies are positioned towards the ด้านหน้า of the chair seat. Incorrect orientation can lead to discomfort and instability.
2. Attach Leg Assemblies to Seat: Carefully align the dowels of the leg assemblies with the pre-drilled holes on the underside of the chair seat.
3. Insert Legs: Using a rubber mallet, gently but firmly tap each leg into its corresponding hole. Tap each leg a little at a time to ensure even insertion. Avoid using a metal hammer directly, as this can damage the wood.
4. Apply Wood Glue (Recommended): For increased stability and to prevent future wobbling, apply a small amount of wood glue into the seat holes and onto the dowels of the legs before insertion. Wipe away any excess glue immediately.
5. ยึดด้วยสกรู: Once the legs are fully seated, insert the provided screws into the pre-drilled holes to secure the leg assemblies to the seat. Tighten firmly but do not overtighten.
6. Attach Cross-bar Supports: Connect the cross-bar supports between the legs. Ensure they are properly aligned and secured with the provided hardware. It is advisable to keep these screws slightly loose until all cross-bars are in place, then tighten them all.
7. การตรวจสอบขั้นสุดท้าย: After assembly, gently rock the chair to check for stability. If any wobbling occurs, re-check all connections and consider applying wood glue if not already done.

Important: The single screw in each dowel may not be sufficient for long-term stability without the addition of wood glue.

3. การดำเนินงานและการใช้งาน

These chairs are designed for indoor use, primarily in dining room settings. The maximum recommended weight capacity for each chair is 220 ปอนด์ (ประมาณ 100 กก.). Exceeding this limit may compromise the chair's structural integrity and user safety.

Always ensure the chair is placed on a flat, stable surface before use. Avoid standing on the chair or using it as a step stool.

4. การบำรุงรักษา

Regular maintenance helps preserve the appearance and longevity of your Winsome Windsor chairs.

• การทำความสะอาด: เช็ดทำความสะอาดด้วยโฆษณาamp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the natural wood finish.
• การตรวจสอบตามระยะเวลา: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as necessary to maintain stability.
• การดูแลไม้: To maintain the wood's natural luster, occasional application of a wood-safe polish or conditioner is recommended.
• สภาพแวดล้อม : Avoid placing chairs in direct sunlight or near heat sources, which can cause wood to dry out, crack, or warp. Maintain a stable humidity level in the room.

5 การแก้ไขปัญหา

This section addresses common issues you might encounter with your Winsome Windsor chairs.

5.1. เก้าอี้โยกเยก

• Check Leg Orientation: Ensure the longer legs are positioned at the front of the chair.
• ขันสกรูทั้งหมดให้แน่น: Verify that all screws securing the legs and cross-bar supports are fully tightened. Do not overtighten.
• Re-seat Legs: If wobbling persists, disassemble the legs from the seat. Reapply wood glue to the dowels and holes, then re-insert the legs using a rubber mallet, ensuring they are fully seated and even.
• การปรับระดับ: Ensure the floor surface is level. If the floor is uneven, consider using furniture pads or glides to stabilize the chair.

5.2. Parts Missing or Damaged

If you find any parts missing or damaged upon unpacking, please contact Winsome customer support immediately for assistance. Do not attempt to assemble the chair with missing or damaged components.

6. ข้อมูลจำเพาะ

7. การรับประกันและการสนับสนุน

Specific warranty details for the Winsome Windsor 2Pc Set RTA Chair are not provided in this manual. For information regarding product warranty, returns, or technical support, please contact Winsome customer service directly or visit their official webเว็บไซต์.

ผู้ผลิต: Winsome Trading Inc

ติดต่อ: Refer to the Winsome official website or your purchase documentation for customer service contact information.