Hot Steam SGB-700

HOT-STEAM SGB-700 Gravity Feed Water Bottle Steam Iron Instruction Manual

Model: SGB-700

การแนะนำ

This manual provides essential information for the safe and efficient operation of your HOT-STEAM SGB-700 Gravity Feed Water Bottle Steam Iron. Please read all instructions carefully before use and retain this manual for future reference.

The HOT-STEAM SGB-700 is a top-quality electric iron designed for dependable operation, featuring an electric micro-switch and temperature control. It comes complete with a water bottle, 6-foot silicone hose, Teflon shoe, extra plunger assembly, spring, iron rest, and resin. This system eliminates the need for a separate LowBoy or boiler.

ข้อมูลด้านความปลอดภัย

  • ควรดึงปลั๊กเตารีดออกทุกครั้งเมื่อเติมน้ำ ทำความสะอาด หรือเมื่อไม่ได้ใช้งาน
  • ห้ามใช้งานเตารีดในขณะที่สายไฟหรือปลั๊กชำรุด หรือหากเตารีดตกหรือชำรุดเสียหาย
  • เก็บเตารีดและสายไฟให้พ้นจากมือเด็ก
  • ใช้เตารีดตามวัตถุประสงค์เท่านั้น
  • ห้ามพ่นไอน้ำใส่คนหรือสัตว์โดยเด็ดขาด
  • Ensure the iron is placed on a stable, heat-resistant surface when resting.
  • The urethane handle protects the operator's hand from heat, but caution should always be exercised.
  • The iron is equipped with a thermal fuse for complete protection from overheating.
  • U/L Approved Components ensure safety standards are met.

สิ่งที่รวมอยู่

Your HOT-STEAM SGB-700 Gravity Feed Steam Iron package includes the following components:

  • HOT-STEAM SGB-700 Electric Iron
  • 1-Gallon Water Bottle
  • 6-Foot Silicone Hose
  • Teflon Shoe (Laminate Sole Plate)
  • Extra Plunger Assembly
  • Anti-Kink Spring
  • ที่วางเตารีดซิลิโคน
  • In-line Demineralizer Cartridge
  • Hose-and-Cord Clips
  • Instruction/Parts Manual

วีดีโอ: Unboxing the Silver Star ES-90A. This video demonstrates the components included with a similar gravity feed steam iron, providing a visual guide to what you should find in your HOT-STEAM SGB-700 package.

คำแนะนำการตั้งค่า

Follow these steps to set up your HOT-STEAM SGB-700 Gravity Feed Steam Iron for first use:

  1. เตรียมขวดน้ำให้พร้อม: Remove the cap from the 1-gallon water bottle.
  2. Install Demineralizer: Push the short black hose onto the demineralizer cartridge inlet. Ensure it is fully seated.
  3. เติมน้ำใส่ขวด: Fill the water bottle with ordinary tap water.
  4. Hang Water Bottle: Hang the filled water bottle at least 36 inches (91 cm) above your ironing surface. This height is crucial for proper gravity feed.
  5. Connect Demineralizer to Bottle: Push the black hose from the demineralizer onto the water bottle's outlet valve.
  6. Connect Hose to Iron: Slide the anti-kink spring over one end of the 6-foot silicone water hose. Then, slide the water hose onto the solenoid inlet of the iron. Ensure it is fully seated and push the anti-kink spring around the solenoid inlet to prevent kinking.
  7. Secure Hoses and Cords: Use the provided hose-and-cord clips to keep the water hose and power cord organized and prevent clutter on your workspace.
  8. Install Sole Plate (Optional): If desired, slip the laminate sole plate (Teflon shoe) onto the iron. This is recommended for many delicate materials.
  9. Open Water Valve: Turn the valve on the water bottle counterclockwise to open it and allow water to flow to the iron.

วีดีโอ: Setting Up the Silver Star ES-90A. This video provides a visual demonstration of the setup process for a similar gravity feed steam iron, including connecting the water hose, demineralizer, and hanging the water bottle.

HOT-STEAM SGB-700 Gravity Feed Steam Iron with water bottle and accessories

ภาพ: The HOT-STEAM SGB-700 Gravity Feed Steam Iron setup, showing the iron, water bottle, and connecting hose. This illustrates the general arrangement of the components during use.

คำแนะนำการใช้งาน

  1. เปิดเครื่อง: Plug the iron into a 120V electrical outlet. The heat indicator light will illuminate, indicating the iron is heating up.
  2. ตั้งค่าอุณหภูมิ: Use the temperature control dial to select the appropriate heat setting for your fabric type (e.g., synthetics, silk, wool, cotton, linen). Refer to the fabric care label for guidance.
  3. รอเครื่องทำความร้อน: Allow the iron to reach the desired temperature. The indicator light may turn off once the set temperature is achieved.
  4. Steam Operation: Press the steam button on the handle to release steam. The electric micro-switch ensures dependable steam delivery.
  5. การรีดผ้า: Glide the iron smoothly over the fabric. For best results, use consistent pressure and motion.
  6. หมดแรง: When finished, turn the temperature dial to the "OFF" position and unplug the iron from the outlet.

การซ่อมบำรุง

  • การทำความสะอาดแผ่นความร้อน: ปล่อยให้เตารีดเย็นลงจนหมด เช็ดแผ่นความร้อนด้วยผ้าamp cloth. Do not use abrasive cleaners or scouring pads, as this can damage the non-stick surface.
  • Demineralizer Cartridge: The in-line demineralizer cartridge helps prevent mineral buildup. Replace the cartridge periodically as recommended by the manufacturer or when you notice a decrease in steam performance or mineral residue.
  • ขวดน้ำ: Periodically clean the water bottle with mild soap and water. Rinse thoroughly.
  • พื้นที่จัดเก็บ: Store the iron in a safe, dry place once it has cooled down. Ensure the water bottle is empty if storing for an extended period.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เตารีดไม่ร้อนไม่ได้เสียบปลั๊ก; มีปัญหาที่เต้ารับไฟฟ้า; ปุ่มปรับอุณหภูมิถูกตั้งค่าเป็น OFFEnsure iron is securely plugged in. Check power outlet. Turn temperature dial to desired setting.
ไม่มีไอน้ำหรือไอน้ำออกน้อยWater bottle empty; water valve closed; demineralizer clogged; hose kinked; iron not hot enough.Refill water bottle. Open water valve (counterclockwise). Replace demineralizer cartridge. Straighten hose. Allow iron to fully heat.
น้ำรั่วจากเหล็กTemperature too low for steam; water bottle overfilled; hose connections loose.Ensure iron is at steam-ready temperature. Do not overfill water bottle. Check all hose connections for tightness.
Iron leaves residue on fabricSoleplate is dirty; incorrect temperature setting for fabric.Clean the soleplate. Adjust temperature setting according to fabric type. Consider using the Teflon shoe.

ข้อมูลจำเพาะ

  • แบบอย่าง: เอสจีบี-700
  • ยี่ห้อ: ไอน้ำร้อน
  • พลัง: 1000 วัตต์
  • เล่มที่tage: 120โวลต์
  • น้ำหนัก: 4.6 ปอนด์
  • คุณสมบัติพิเศษ: แผ่นความร้อนไม่ติด
  • วัสดุฐาน: เรซิน
  • รับมือ: Urethane for heat protection
  • ความปลอดภัย: Thermal Fuse, U/L Approved Components
  • ความจุขวดน้ำ: 1 แกลลอน

การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the contact details provided in the separate warranty card included with your product. You may also visit the official Hot Steam webเว็บไซต์เพื่อความช่วยเหลือเพิ่มเติมและการลงทะเบียนผลิตภัณฑ์

© 2026 Hot Steam. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.