การแนะนำ
This manual provides essential information for the proper installation, use, and maintenance of Traxxas 8347 4mm Flanged Nylon Locking Serrated Nuts. These nuts are designed for secure fastening in various Traxxas RC vehicle applications, including the 4-Tec 2.0 AWD, VXL AWD Chassis, TRX-4, and TRX-6 models. Please read these instructions thoroughly before use to ensure optimal performance and longevity of your components.
สินค้าเกินview
The Traxxas 8347 nuts are 4mm flanged nylon locking serrated nuts. They are black in color and feature a serrated flange for enhanced grip and a nylon insert for locking capabilities, preventing loosening due to vibrations. This package includes ten (10) nuts.

Figure 1: Ten Traxxas 8347 4mm Flanged Nylon Locking Serrated Nuts. Each nut features a black exterior, a flanged base, and an internal nylon locking ring.
การติดตั้งและการตั้งค่า
Proper installation is crucial for the performance and safety of your RC vehicle. Ensure you have the correct tools before beginning.
เครื่องมือที่จำเป็น:
- 4mm nut driver or wrench
- Appropriate RC vehicle manual (for specific component removal/installation)
ขั้นตอนการติดตั้ง:
- ระบุจุดยึด: Locate the component requiring a 4mm flanged nylon locking nut. Common applications include wheel axles, suspension links, and other areas subject to vibration.
- Prepare Component: Ensure the threaded shaft or bolt is clean and free of debris or damaged threads.
- น็อตยึดตำแหน่ง: Place the Traxxas 8347 nut onto the threaded shaft. Ensure the flanged side faces the component you are securing. The serrations on the flange are designed to grip the surface.
- ขันน็อตให้แน่น: Using a 4mm nut driver or wrench, carefully thread the nut onto the shaft. Tighten until the nylon locking insert engages and resistance is felt. Continue tightening until the nut is snug and the component is securely fastened, but avoid overtightening. Overtightening can strip threads or damage the nylon insert, reducing its locking effectiveness.
- ตรวจสอบความปลอดภัย: After tightening, gently attempt to move the secured component to confirm it is firmly in place and the nut is not loose.
บันทึก: The nylon locking feature provides resistance against loosening. Repeated removal and reinstallation of the nut may reduce the effectiveness of the nylon insert. If a nut feels loose after reinstallation, it is recommended to replace it.
การซ่อมบำรุง
Regular inspection and maintenance will prolong the life of your Traxxas 8347 nuts and ensure the reliability of your RC vehicle.
- Pre-Run Inspection: Before each use of your RC vehicle, visually inspect all nuts for tightness. Hand-tighten any nuts that feel loose.
- การตรวจสอบหลังการใช้งาน: After each use, check for any nuts that may have loosened due to vibrations or impacts during operation.
- การทดแทน: If a nut consistently loosens, or if the nylon insert appears damaged or worn, replace the nut with a new Traxxas 8347 nut. The black finish may chip with repeated removal and installation; this is cosmetic and does not affect performance unless the nut itself is damaged.
- การทำความสะอาด: Keep nuts free from dirt, mud, and other debris. A soft brush can be used for cleaning.
การแก้ไขปัญหา
Nut Loosens Repeatedly:
- สาเหตุ: Worn nylon locking insert, stripped threads on the nut or shaft, or insufficient tightening.
- สารละลาย: Replace the nut. Inspect the threaded shaft for damage; replace if necessary. Ensure proper tightening during installation.
Difficulty Threading Nut:
- สาเหตุ: Cross-threading, damaged threads on the nut or shaft, or incorrect nut size.
- สารละลาย: Ensure the nut is aligned correctly before threading. Do not force the nut. If resistance is met immediately, unthread and re-attempt. Inspect threads for damage. Verify that you are using a 4mm nut on a compatible 4mm threaded shaft.
ข้อมูลจำเพาะ
| หมายเลขชิ้นส่วน | 8347 |
| วัสดุ | ไนลอน |
| ประเภทตัวยึด | Flange, Serrated, Locking |
| ขนาดเกลียว | M4 (4 มม.) |
| เสร็จสิ้นภายนอก | สีดำ |
| ปริมาณ | 10 nuts per package |
| รุ่นที่รองรับ | Traxxas 4-Tec 2.0 AWD, VXL AWD Chassis, TRX-4, TRX-6, and other models requiring 4mm flanged nylon locking nuts. |
การรับประกันและการสนับสนุน
For specific warranty information regarding Traxxas products, please refer to the official Traxxas website or contact Traxxas customer support directly. General product support and technical assistance can also be found on the official Traxxas webเว็บไซต์.
อย่างเป็นทางการจาก Traxxas Webเว็บไซต์: traxxas.com







