Ultimarc I-PAC 4 Arcade Game Controller Interface Instruction Manual

การแนะนำ

The Ultimarc I-PAC 4 is an advanced interface designed for connecting arcade controllers, such as pushbuttons and joysticks, to your computer. It is specifically engineered to support up to four players simultaneously, making it ideal for multi-player MAME cabinet setups. This manual provides essential information for the proper setup, operation, and maintenance of your I-PAC 4 device.

คู่มือการติดตั้ง

Follow these steps to correctly set up your I-PAC 4 interface:

1. แกะอุปกรณ์ออกจากกล่อง: Carefully remove the I-PAC 4 board and the included USB cable from its packaging.
2. Connect Arcade Controls: The I-PAC 4 features 64 inputs, each with its own dedicated microprocessor pin, ensuring no interaction or delays. Connect your joysticks and pushbuttons to the clearly labeled screw terminals on the board. The inputs are marked for 4 joysticks (Up, Down, Left, Right), 8 buttons per player (SW1-SW8), plus dedicated inputs for Coin (1-4) and Start (1-4). Ensure all connections are secure.
3. การเชื่อมต่อกราวด์: All inputs require a common ground connection. The board provides multiple ground terminals (GND).
4. เชื่อมต่อกับคอมพิวเตอร์: Use the provided USB 2.0 cable to connect the I-PAC 4 to an available USB port on your computer. The I-PAC 4 emulates a USB keyboard and overcomes the typical USB simultaneously-pressed-switch limit.
5. Install Configuration Tool: For advanced configuration and mapping, download the official I-PAC configuration tool from the Ultimarc website or the provided support link: https://www.arcaderenovations.com/ipac4/. This tool allows you to customize key assignments, set up shift functions, and more.
6. ตรวจสอบการติดตั้ง: The I-PAC features a self-test LED which provides an instant visible check of your installation and can indicate connection problems. Observe this LED during setup.

Figure 1: The Ultimarc I-PAC 4 board and its accompanying USB cable. The board is green with clearly labeled screw terminals for connecting arcade controls. The USB cable connects the interface to a computer.

คำแนะนำการใช้งาน

The I-PAC 4 is designed for intuitive operation once configured. Here are key operational features:

• ปลั๊กแอนด์เพลย์: After initial configuration, the I-PAC 4 operates as a standard USB keyboard or game controller, depending on its settings. It retains its programming even after power-off.
• รองรับโหมดผู้เล่นหลายคน: The device supports up to four players, with dedicated inputs for each player's joystick and eight buttons. This allows for simultaneous input without ghosting or delays, crucial for fighting games and other multi-button titles.
• Shift Functionality: The I-PAC 4 includes a unique shift function. Any input can be assigned as a shift key to access an alternate set of keycodes. The shift button itself can also have its own function, eliminating the need for a dedicated control panel button solely for shifting.
• Flexible Input Configuration: Beyond keyboard emulation, pins can be configured as mouse buttons or game controller buttons, offering versatility for various arcade setups and applications. It also supports power and volume control functions.

การบำรุงรักษาและการดูแล

To ensure the longevity and proper functioning of your I-PAC 4, observe the following guidelines:

• จัดการด้วยความระมัดระวัง: The I-PAC 4 is a sensitive electronic component. Avoid dropping the device or subjecting it to excessive force.
• การป้องกันการเชื่อมต่อ: Be careful when connecting and removing wires from the screw terminals. Do not overtighten screws. Ensure the USB port is not subjected to stress; avoid pulling on the USB cord.
• สภาพแวดล้อม : Store and operate the device in a dry environment, away from extreme temperatures and humidity.
• การทำความสะอาด: If necessary, gently clean the board with a dry, soft cloth. Do not use liquid cleaners or solvents.

Note: Boards damaged by customer misuse, such as missing screws, bent wire connectors, or a broken USB port, are typically not eligible for a refund or warranty claim.

การแก้ไขปัญหา

If you encounter issues with your I-PAC 4, consider the following common solutions:

• Input Not Responding:
  • Check wiring: Ensure all wires are securely connected to the correct screw terminals on the I-PAC 4 board and to your arcade controls.
  • Verify ground connection: Confirm that the ground wire for the non-responsive input is properly connected to a GND terminal.
  • Use the self-test LED: The self-test LED on the I-PAC 4 can help identify problematic connections. If the LED indicates an issue, re-check the corresponding wiring.
• Incorrect Key Mapping:
  • Re-run the configuration tool: Use the I-PAC configuration tool to verify and re-assign key mappings. Ensure the correct profile ถูกโหลดแล้ว
  • Check for software conflicts: Other software or drivers on your computer might be interfering with the I-PAC's input.
• คอมพิวเตอร์ไม่รู้จักอุปกรณ์:
  • Try a different USB port: Connect the I-PAC 4 to another USB port on your computer.
  • Check USB cable: Ensure the USB cable is not damaged and is fully inserted into both the I-PAC 4 and the computer.
  • Restart computer: A simple restart can often resolve recognition issues.
• Simultaneous Press Limit: The I-PAC is designed to break through the USB simultaneously-pressed-switch limit. If you experience issues with multiple inputs not registering, ensure your configuration is correct and that you are using the official I-PAC drivers/firmware.

Most problems are caused by configuration or wiring issues. If you continue to experience difficulties, please contact customer support.

ข้อมูลจำเพาะ

Note: This board does not include trackball or spinner connections.

ข้อมูลการรับประกัน

Specific warranty terms and conditions for the Ultimarc I-PAC 4 are typically provided at the time of purchase or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims. Damage resulting from misuse, improper installation, or unauthorized modifications may void the warranty.

การสนับสนุนลูกค้า

For further assistance, technical support, or inquiries regarding your Ultimarc I-PAC 4, please contact the manufacturer or authorized reseller:

• Online Support & Documentation: Visit the official support page for the I-PAC 4, which includes configuration tools and detailed documentation: https://www.arcaderenovations.com/ipac4/
• การสนับสนุนทางอีเมล์: For direct assistance, you can email sales@arcaderenovations.com.

เมื่อติดต่อฝ่ายสนับสนุน โปรดระบุหมายเลขรุ่นผลิตภัณฑ์ของคุณ (8541667255) และคำอธิบายโดยละเอียดของปัญหาที่คุณพบ