Wilo TWU4-0409-C-EM

Wilo SUB TWU 4 Submersible Pump Instruction Manual

Model: TWU4-0409-C-EM

1. บทนำ

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Wilo SUB TWU 4 submersible pump, model TWU4-0409-C-EM. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. ข้อมูลด้านความปลอดภัย

คำเตือนความปลอดภัยทั่วไป:

  • Always disconnect the power supply before performing any work on the pump or its electrical components.
  • การติดตั้งและการบำรุงรักษาควรดำเนินการโดยบุคลากรที่มีคุณสมบัติเหมาะสมเท่านั้น โดยเป็นไปตามข้อบังคับและมาตรฐานท้องถิ่น
  • Ensure the pump is correctly grounded to prevent electrical shock.
  • Do not operate the pump dry. Running without water will cause severe damage.
  • ปกป้องปั๊มจากอุณหภูมิเยือกแข็ง
  • Use only genuine Wilo spare parts for repairs.

3. การตั้งค่าและการติดตั้ง

3.1 การแกะกล่อง

Carefully remove the pump from its packaging. Inspect the pump for any visible damage that may have occurred during transit. Report any damage to your supplier immediately.

Wilo SUB TWU 4 Submersible Pump

Figure 1: Wilo SUB TWU 4 Submersible Pump. This image shows the pump unit, highlighting its compact design suitable for well installation.

3.2 Pump Selection Guide (TWU Series)

The following table provides a guide for selecting the appropriate TWU series pump based on required head (H) and flow rate (Q). This helps ensure optimal performance for your specific application.

Table 1: Wilo TWU Pump Selection Guide
H/Q<2.5 m³/h2.5 ถึง 3 m³ / h3 ถึง 3.5 m³ / h3.5 ถึง 4 m³ / h4 ถึง 4.5 m³ / h4.5 ถึง 5 m³ / h5 ถึง 5.5 m³ / h
110 เมตรTWU 4-0418-C
100 เมตรTWU 4-0418-CTWU 4-0418-C
90 เมตรTWU 4-0418-CTWU 4-0418-CTWU 4-0418-C
80 เมตรTWU 4-0414-CTWU 4-0418-CTWU 4-0418-CTWU 4-0418-C
70 เมตรTWU 4-0414-CTWU 4-0414-CTWU 4-0414-CTWU 4-0418-CTWU 4-0418-C
60 เมตรTWU 4-0414-CTWU 4-0414-CTWU 4-0414-CTWU 4-0414-CTWU 4-0418-C
50 เมตรTWU 4-0409-CTWU 4-0414-CTWU 4-0414-CTWU 4-0414-CTWU 4-0414-CTWU 4-0418-CTWU 4-0418-C
40 เมตรTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0414-CTWU 4-0414-CTWU 4-0418-C
30 เมตรTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0414-CTWU 4-0414-C
20 เมตรTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0409-CTWU 4-0409-C

Note: H represents the total head in meters, and Q represents the flow rate in cubic meters per hour. The colors in the table correspond to different pump models (e.g., light blue for TWU 4-0418-C, orange for TWU 4-0414-C, grey for TWU 4-0409-C).

3.3 การเชื่อมต่อไฟฟ้า

Connect the pump to a suitable power supply according to the pump's specifications and local electrical codes. Ensure the voltage and frequency match the pump's requirements. A residual current device (RCD) with a tripping current of no more than 30 mA is recommended for additional safety.

3.4 การต่อท่อ

Connect the discharge pipe to the pump outlet. Ensure all connections are watertight and free from leaks. Use appropriate sealing materials. The pipe diameter should be sufficient to minimize pressure loss.

4. คู่มือการใช้งาน

4.1 การเริ่มต้นใช้งานครั้งแรก

Before starting the pump, ensure it is fully submerged in water. Connect the power supply. The pump should start automatically if equipped with a float switch, or manually if controlled by an external switch. Monitor the pump for unusual noises or vibrations during the first few minutes of operation.

4.2 การทำงานต่อเนื่อง

The Wilo SUB TWU 4 is designed for continuous operation within its specified performance range. Avoid operating the pump outside these limits to prevent premature wear or damage. Regularly check the water level to ensure the pump remains submerged.

4.3 การปิดระบบ

To shut down the pump, disconnect the power supply. If the pump is to be out of service for an extended period, follow the maintenance and storage guidelines.

5. การบำรุงรักษา

Regular maintenance ensures the longevity and reliable operation of your pump.

5.1 การตรวจสอบตามปกติ

  • Inspect the power cable for any signs of damage or wear.
  • Check the pump's intake for blockages from debris.
  • Ensure all pipe connections remain secure and leak-free.

5.2 การทำความสะอาด

If the pump's performance decreases, it may be due to blockages. Disconnect power, remove the pump, and clean the intake screen and impeller area. Use clean water and a soft brush. Do not use harsh chemicals.

5.3 ฤดูหนาว

If the pump is installed in an area subject to freezing temperatures and will not be used, it must be removed from the water and stored in a frost-free environment. Drain all water from the pump and pipes to prevent damage from ice expansion.

6 การแก้ไขปัญหา

ก่อนที่จะติดต่อฝ่ายสนับสนุนลูกค้า โปรดอ่านview ปัญหาทั่วไปต่อไปนี้และวิธีแก้ไขที่เป็นไปได้:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ปั๊มไม่ทำงานNo power supply; tripped circuit breaker; faulty float switch; motor fault.Check power connection; reset breaker; inspect float switch; contact service.
Pump runs but no water deliveryAir in system; clogged intake/impeller; low water level; discharge pipe blockage.Bleed air; clean intake/impeller; ensure pump is submerged; check discharge pipe.
อัตราการไหลลดลงPartial blockage; worn impeller; excessive head loss in piping.Clean pump; inspect impeller; check pipe sizing and condition.
เสียงรบกวนหรือการสั่นสะเทือนมากเกินไปเศษสิ่งสกปรกในปั๊ม; ตลับลูกปืนสึกหรอ; การติดตั้งไม่ถูกต้องClean pump; contact service for bearing replacement; verify stable installation.

7. ข้อมูลจำเพาะ

Key technical specifications for the Wilo SUB TWU 4 submersible pump, model TWU4-0409-C-EM:

  • ยี่ห้อ: วิโล
  • หมายเลขรุ่น: TWU4-0409-C-EM (also referred to as 'sub twu 4')
  • สไตล์: ดำน้ำได้
  • พลัง: 0.75 กิโลวัตต์
  • GTIN: 04044966515679
  • ขนาดแพ็คเกจ: 22.8 x 18.8 x 13 ซม.
  • น้ำหนักสินค้า: 1.21 กก.
  • ผู้ผลิต: วิโล
  • วันที่พร้อมใช้งานครั้งแรก: 16 พฤษภาคม 2017

Note: For detailed performance curves and specific electrical data, refer to the official Wilo product documentation or contact Wilo technical support.

8. การรับประกันและการสนับสนุน

For warranty information, please refer to the warranty card included with your product or visit the official Wilo website. Technical support and spare parts can be obtained through authorized Wilo dealers or directly from Wilo customer service. Please have your model number (TWU4-0409-C-EM) and purchase date available when contacting support.

© 2026 Wilo. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.