Good Earth Lighting BO1065-WHG-06LF6-E

Ecolight 6-inch LED Motion Utility Light

Model: BO1065-WHG-06LF6-E | Brand: Good Earth Lighting

การแนะนำ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolight Battery-Operated 6-inch LED Dual Lens Motion Utility Light. Please read this manual thoroughly before using the product to ensure proper function and safety.

ข้อมูลด้านความปลอดภัย

  • ตรวจสอบให้แน่ใจว่าใส่แบตเตอรี่ในขั้วที่ถูกต้อง
  • อย่าใช้แบตเตอรี่เก่าและใหม่ผสมกัน หรือแบตเตอรี่ประเภทต่างๆ
  • ถอดแบตเตอรี่ออกหากจะไม่ใช้ไฟเป็นเวลานาน
  • This product is designed for dry locations only. Avoid exposure to water or high humidity.
  • เก็บให้พ้นจากมือเด็ก

เนื้อหาแพ็คเกจ

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนการติดตั้ง:

  • 1 x Ecolight 6-inch LED Motion Utility Light
  • 3 x AA แบตเตอรี่ (รวมอยู่ด้วย)
  • 4 x Small Damage-Free Picture Hanging Command Strips by 3M
Ecolight 6-inch LED Motion Utility Light packaging showing contents
Figure 1: Product packaging illustrating the included components.

การติดตั้งและการตั้งค่า

The Ecolight Motion Utility Light is designed for easy, flexible, and damage-free mounting using the included 3M Command Strips. No wiring is required.

ขั้นตอนที่ 1: เตรียมแสงสว่าง

  1. ถอดฝาครอบด้านหลังของไฟออก
  2. Locate and remove the clear plastic tab from the battery compartment. This activates the included AA batteries.
  3. เปลี่ยนฝาหลัง
สูงสุด view of the Ecolight 6-inch LED Motion Utility Light
รูปที่ 2: ด้านบน view of the light, showing the motion sensor and light lenses.

ขั้นตอนที่ 2: เตรียมพื้นผิวการติดตั้ง

  • Choose a clean, dry, and smooth surface for mounting.
  • Clean the surface with rubbing alcohol and a clean cloth. Allow it to dry completely. Do not use household cleaners.

Step 3: Apply Command Strips

  1. Separate the two interlocking strips from each pair.
  2. Firmly press two strips together until they click. Repeat for all four strips.
  3. Remove the green liner from one side of each paired strip.
  4. Apply these strips to the designated flat areas on the back of the light. Press firmly.
  5. Remove the remaining liner from the exposed side of each strip.

Step 4: Mount the Light

  • Align the light with the prepared surface.
  • Press the light firmly against the surface for 30 seconds to ensure strong adhesion.
Ecolight 6-inch LED Motion Utility Light installed under a kitchen cabinet
Figure 3: The utility light installed under a cabinet, providing illumination.

For a visual guide on installation and removal, please refer to the official product video:

Video 1: Official installation and removal guide for the Ecolight Motion Utility Light. This video demonstrates the steps for setting up and safely removing the light using Command Strips.

คำแนะนำการใช้งาน

The Ecolight Motion Utility Light features motion-activated operation and an auto-off timer for energy efficiency.

  • การเปิดใช้งานการเคลื่อนไหว: The integrated 100-degree Passive Infrared (PIR) sensor detects motion up to 12 feet away. The light will only activate when it is dark and motion is detected, conserving battery life.
  • ตั้งเวลาปิดอัตโนมัติ: After the light activates and no further motion is detected, it will automatically turn off after 30 seconds.

การซ่อมบำรุง

การเปลี่ยนแบตเตอรี่

When the light output diminishes, it is time to replace the batteries.

  1. Carefully remove the light from its mounting surface. If using Command Strips, follow the removal instructions (pull tab straight down slowly).
  2. ถอดฝาครอบด้านหลังของไฟออก
  3. Replace the three (3) AA batteries with new ones, ensuring correct polarity (+/-).
  4. เปลี่ยนฝาหลัง
  5. Re-mount the light using new Command Strips if necessary, following the installation steps.

The light is rated for 52 hours of illumination on a full battery charge.

การแก้ไขปัญหา

ปัญหา สาเหตุที่เป็นไปได้ สารละลาย
ไฟไม่เปิด แบตเตอรี่หมดหรือติดตั้งไม่ถูกต้อง เปลี่ยนแบตเตอรี่โดยตรวจสอบให้แน่ใจว่าใส่ขั้วถูกต้อง
เปิดไฟในเวลากลางวัน Sensor is detecting insufficient ambient light. Ensure the light is installed in an area that is sufficiently dark for motion activation.
Light does not detect motion reliably. Sensor obstructed or outside detection range. Clear any obstructions from the sensor. Ensure motion occurs within 12 feet and 100 degrees of the sensor.
ไฟดับเร็วเกินไป No continuous motion detected within 30 seconds. This is normal operation. The light is designed to turn off after 30 seconds of no detected motion to conserve battery life.

ข้อมูลจำเพาะ

  • หมายเลขรุ่น: BO1065-WHG-06LF6-E
  • ขนาด : 6 x 2.5 x 1.1 นิ้ว (ยาว x กว้าง x สูง)
  • น้ำหนักสินค้า: 6.4 ออนซ์
  • แหล่งพลังงาน: Battery powered (3 x AA batteries, included)
  • เล่มที่tage: 4.5 โวลต์ (กระแสตรง)
  • วัดtage: 6 วัตต์
  • ประเภทหลอดไฟ: นำ
  • ฟลักซ์ส่องสว่าง: 80 ลูเมน
  • อุณหภูมิสี: 4000K (Bright, neutral white light)
  • เซ็นเซอร์ตรวจจับการเคลื่อนไหว: 100-degree PIR sensor, detects motion up to 12 ft.
  • ตั้งเวลาปิดอัตโนมัติ: 30 วินาที (หลังจากตรวจไม่พบการเคลื่อนไหว)
  • Lamp ชีวิต: นานถึง 30,000 ชั่วโมง
  • อายุการใช้งานแบตเตอรี่: Approximately 52 hours of illumination on a full charge
  • วิธีการติดตั้ง: Wall-mounted (with included 3M Command Strips)
  • การใช้งาน: สถานที่แห้งเท่านั้น
  • วัสดุ: พลาสติก
  • สี: สีขาว

การรับประกัน

This Ecolight Motion Utility Light comes with a รับประกันจำกัด 6 ปี. For details regarding warranty coverage and claims, please refer to the product packaging or contact Good Earth Lighting customer support.

สนับสนุน

For further assistance, technical support, or inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official webเว็บไซต์.

ผู้ผลิต: แสงสว่างจากโลกที่ดี

Webเว็บไซต์: Good Earth Lighting Store on Amazon

© 2024 Good Earth Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.