Fengda FD-176K Complete Airbrush Starter Set User Manual

1. บทนำ

This manual provides essential instructions for the safe and effective use of your Fengda FD-176K Complete Airbrush Starter Set. This set includes a double-action airbrush (Model BD-130) and a compact air compressor (Salon Air). Please read this manual thoroughly before operating the equipment to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

2. คำแนะนำด้านความปลอดภัย

• การระบายอากาศ : Always operate the airbrush in a well-ventilated area to avoid inhaling paint fumes or atomized particles. Use a spray booth or wear appropriate respiratory protection.
• การปกป้องดวงตา: Wear safety glasses or goggles to protect your eyes from paint spray or cleaning solutions.
• การปกป้องผิวหนัง: Wear gloves to prevent skin contact with paints and solvents.
• วัสดุไวไฟ: Do not use flammable paints or solvents near open flames, sparks, or heat sources. Ensure the work area is free from ignition sources.
• ความปลอดภัยทางไฟฟ้า: Ensure the air compressor is connected to a grounded power outlet. Do not operate the compressor with wet hands or in damp เงื่อนไข: โปรดถอดปลั๊กไฟก่อนทำความสะอาดหรือซ่อมบำรุง
• เด็กและสัตว์เลี้ยง: Keep the airbrush equipment and all materials out of reach of children and pets.
• ความดัน: Never exceed the maximum recommended working pressure for your airbrush or compressor.
• Cleaning Solvents: Use cleaning solvents according to their manufacturer's instructions and safety data sheets.

3. เนื้อหาบรรจุภัณฑ์

Carefully unpack all components and verify that all items are present and undamaged. If any items are missing or damaged, contact your retailer.

• Fengda BD-130 Double-Action Gravity Feed Airbrush
• Salon Air Compact Air Compressor
• สายลม
• ที่วางพู่กัน
• ดรอปเปอร์
• ประแจ
• Storage Case for Airbrush
• Power Adapter for Compressor

Figure 3.1: Fengda BD-130 airbrush and accessories neatly organized within its protective clear plastic case.

รูปที่ 3.2: รายละเอียด view of the Fengda BD-130 double-action airbrush, highlighting its chrome finish and control components.

Figure 3.3: The clear plastic case for the Fengda BD-130 airbrush, featuring a label that details the model (BD-130 Double-Action Airbrush), feed type (Gravity), cup capacity (7ml), and working pressure (15-50PSI).

Figure 3.4: The Salon Air compact air compressor, showing its silver casing, black handle, pressure gauge, and control knobs.

4. การตั้งค่า

1. การจัดวาง: Place the air compressor on a stable, level surface in a well-ventilated area. Ensure there is adequate space around the compressor for air circulation.
2. เชื่อมต่อสายลม: Connect one end of the air hose to the air outlet on the compressor and the other end to the air inlet on the bottom of the airbrush handle. Ensure connections are secure to prevent air leaks.
3. การเชื่อมต่อไฟฟ้า: Plug the compressor's power adapter into a suitable grounded electrical outlet.
4. เตรียมสี: Mix your chosen paint to the appropriate consistency for airbrushing. Most airbrush paints require thinning. Use a dropper to add paint to the airbrush's gravity cup. Do not overfill.

5. คู่มือการใช้งาน

1. เปิดเครื่อง: Turn on the air compressor using the power switch. The compressor will begin to build pressure.
2. ปรับแรงดัน: Use the pressure regulator knob on the compressor to set the desired working pressure. The recommended working pressure for the BD-130 airbrush is 15-50 PSI, depending on paint type and desired effect.
3. Double-Action Control: The BD-130 is a double-action airbrush.
   • Pressing the trigger down releases air.
   • Pulling the trigger back controls the amount of paint released.
   Practice this control on a scrap surface to get a feel for the air and paint flow.
4. เทคนิคการพ่น:
   • Hold the airbrush approximately 2-6 inches (5-15 cm) from your surface.
   • Always start air flow before paint flow, and stop paint flow before air flow, to prevent paint splattering.
   • Move your hand in smooth, consistent strokes.
5. การหยุด: When finished, release the trigger, turn off the compressor, and disconnect the power.

6. การบำรุงรักษา

Proper cleaning and maintenance are crucial for the longevity and performance of your airbrush equipment.

6.1 Airbrush Cleaning (After Each Use)

1. ถ้วยสีเปล่า: Pour any remaining paint from the gravity cup.
2. Flush with Cleaner: Add a small amount of appropriate airbrush cleaner or solvent to the paint cup. Spray it through the airbrush onto a paper towel or into a cleaning pot until the spray runs clear.
3. การล้างย้อนกลับ: Cover the airbrush nozzle with your finger or a cap and press the trigger for air, allowing air to bubble back into the paint cup. This helps dislodge paint from the needle and nozzle. Repeat with fresh cleaner.
4. Disassemble (Periodically): For thorough cleaning, carefully disassemble the airbrush (needle, nozzle, cap). Clean each component with a brush and cleaner. Be extremely careful with the needle and nozzle as they are delicate.
5. ประกอบกลับเข้าที่: Reassemble the airbrush, ensuring all parts are correctly aligned and tightened. Do not overtighten.

6.2 Compressor Maintenance

• รักษาความสะอาด: เช็ดทำความสะอาดภายนอกคอมเพรสเซอร์ด้วยน้ำยาทำความสะอาดamp cloth. Ensure air vents are free from dust and debris.
• Drain Moisture (if applicable): Some compressors have a moisture trap or drain valve. If yours does, drain any accumulated moisture regularly.
• พื้นที่จัดเก็บ: Store the compressor in a dry, dust-free environment when not in use.

7 การแก้ไขปัญหา

8. ข้อมูลจำเพาะ

• รุ่นสินค้า : FD-176K (Complete Starter Set)
• Airbrush Model: BD-130 Double-Action Gravity Feed
• Airbrush Cup Capacity: 7 มล.
• Airbrush Working Pressure: 15-50 PSI (approximate, depends on paint and nozzle)
• รุ่นคอมเพรสเซอร์ : Salon Air (Compact)
• ขนาดแพ็คเกจ: 14.41 x 12.13 x 8.03 นิ้ว (36.6 x 30.8 x 20.4 ซม.)
• น้ำหนักสินค้า: 3.88 ounces (110 grams) - Note: This weight likely refers to a single component, not the entire set. The full set will be heavier.
• แบตเตอรี่ที่ต้องการ: เลขที่

9. การรับประกันและการสนับสนุน

For warranty information, technical support, or to inquire about replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

ผู้ผลิต Website (as per image label): http://www.airpro-europe.com

Manufacturer Address (as per image label): Roodes Wolvenstraat 15, Eerbeek, Netherlands