Fengda BD-116C Airbrush Gun User Manual

การแนะนำ

This manual provides instructions for the safe and effective operation and maintenance of your Fengda BD-116C Airbrush Gun. Please read this manual thoroughly before use and retain it for future reference.

ข้อมูลด้านความปลอดภัย

คำเตือน:

• Protect yourself from chemical exposure. Always use appropriate personal protective equipment (PPE) such as respirators, gloves, and eye protection when handling paints and cleaning solutions.
• Handle pressurized components carefully. Ensure all connections are secure before operating the airbrush. Never point the airbrush at yourself or others.
• Ensure proper application of used materials. Dispose of paints, solvents, and cleaning solutions according to local environmental regulations.
• เก็บให้พ้นจากมือเด็ก
• ใช้ในบริเวณที่มีอากาศถ่ายเทสะดวก

เนื้อหาแพ็คเกจ

ตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างนี้รวมอยู่ในแพ็คเกจของคุณ:

• 1 x BD-R 116 Airbrush Gun
• 1 x Metal Paint Cup (2 ml)
• 1 x Metal Paint Cup (5 ml)
• 1 x Metal Paint Cup (13 ml)
• 3 x Nozzles (0.3 mm, 0.5 mm, 0.8 mm)
• 3 x Needles (0.3 mm, 0.5 mm, 0.8 mm)
• 2 x Air Connectors
• 1 x สายลม (2 เมตร)
• 1 x Mounting Tool
• 1 x คู่มือผู้ใช้ (เอกสารนี้)
• 1 x Molded Plastic Storage Box

Image: The Fengda BD-116C Airbrush Gun with its various nozzles, needles, paint cups, air hose, and tools, all neatly arranged in its storage box.

การตั้งค่า

1. แกะส่วนประกอบ: Carefully remove all items from the storage box. Inspect for any damage.
2. Select Nozzle and Needle: Choose the appropriate nozzle and needle size (0.3mm, 0.5mm, or 0.8mm) for your painting task. The 0.3mm is for fine details, 0.5mm for general work, and 0.8mm for broader coverage. Ensure the needle matches the nozzle size.
3. Assemble Nozzle and Needle:
   • Unscrew the needle chucking guide and pull out the needle.
   • Unscrew the nozzle cap and remove the nozzle.
   • Carefully insert the chosen nozzle and screw the nozzle cap back on. Do not overtighten.
   • Reinsert the chosen needle from the rear of the airbrush, pushing it gently until it seats correctly in the nozzle.
   • Tighten the needle chucking guide.
4. Attach Paint Cup: Screw the desired paint cup (2ml, 5ml, or 13ml) onto the top of the airbrush gun.
5. เชื่อมต่อสายลม: Attach one end of the 2-meter air hose to the airbrush gun's air inlet and the other end to your air compressor (not included). Ensure connections are secure to prevent air leaks.
6. เตรียมพื้นที่ทำงาน: Set up your workspace in a well-ventilated area. Cover surfaces to protect them from overspray.

คำแนะนำการใช้งาน

1. เตรียมสี: Thin your paint to the consistency recommended by the paint manufacturer for airbrushing. Test the consistency on a scrap surface.
2. เติมสีลงในถ้วย: Carefully pour the prepared paint into the attached paint cup. Do not overfill.
3. เชื่อมต่อพลังงาน: If your compressor is battery-powered, ensure it is charged. Connect the compressor to a power source if it requires mains electricity.
4. เปิดใช้งานคอมเพรสเซอร์: Activate your air compressor and set the desired air pressure. Start with a lower pressure and adjust as needed.
5. ทดสอบสเปรย์: Before applying paint to your project, test the spray pattern on a scrap piece of material.
6. Airbrush Technique:
   • Hold the airbrush approximately 5-15 cm (2-6 inches) from the surface, depending on the desired spray pattern and detail.
   • Press down on the trigger for air flow.
   • Pull back on the trigger to release paint. The further you pull back, the more paint is released.
   • Maintain a consistent distance and movement for even coverage.
   • Always start and end your spray off the work surface to avoid paint build-up.
7. การปรับการไหล: Use the needle stop screw at the rear of the airbrush to limit how far the needle can retract, controlling the maximum paint flow.
8. การตกแต่ง: When finished painting, release the trigger completely. Turn off your air compressor.

การบำรุงรักษาและการทำความสะอาด

Proper cleaning after each use is essential for the longevity and performance of your airbrush gun.

1. การล้างเบื้องต้น: Empty any remaining paint from the cup. Add a small amount of appropriate cleaner (water for acrylics, solvent for enamels/lacquers) to the cup. Spray the cleaner through the airbrush until it runs clear.
2. การล้างย้อนกลับ: Place your finger over the nozzle cap and press down for air, then pull back for paint. This will force air back into the paint cup, bubbling the cleaner and helping to dislodge paint particles. Repeat several times.
3. ถอดประกอบเพื่อทำความสะอาดอย่างล้ำลึก: For a thorough clean, disassemble the airbrush:
   • Remove the paint cup.
   • Unscrew the needle chucking guide and carefully pull out the needle from the rear. Clean the needle with a cloth dampened with cleaner.
   • Unscrew the nozzle cap and remove the nozzle. Clean the nozzle carefully with a soft brush and cleaner.
   • Clean the airbrush body and paint channel with a brush and cleaner.
4. ประกอบกลับเข้าที่: Once all parts are clean and dry, reassemble the airbrush. Apply a tiny amount of airbrush lubricant (if available) to the needle and trigger mechanism.
5. พื้นที่จัดเก็บ: Store the airbrush in its original storage box to protect it from dust and damage.

การแก้ไขปัญหา

ข้อมูลจำเพาะ

• แบบอย่าง: BD-116C
• ยี่ห้อ: เฟิงต้า
• ขนาดหัวฉีด: 0.3 มม., 0.5 มม., 0.8 มม.
• ขนาดเข็ม: 0.3 มม., 0.5 มม., 0.8 มม.
• Paint Cup Capacities: 2 ml, 5 ml, 13 ml (metal)
• ความยาวของท่ออากาศ: 2 เมตร
• วัสดุ: โลหะ
• แหล่งพลังงาน: Battery (for compatible compressors, airbrush itself is pneumatic)
• ขนาดสินค้า (แพ็คเกจ): 24.3 x 18.3 x 4.9 ซม.
• Product Weight (Package): 670 กรัม

การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.