Intex 28676 Sand Filter Pump Combo with E.C.O. System User Manual

1. บทนำ

This manual provides detailed instructions for the safe and efficient operation of your Intex 28676 Sand Filter Pump Combo with E.C.O. System. This system is designed to filter and sanitize your pool water, ensuring a clean and enjoyable swimming experience. Please read all instructions carefully before installation and use.

2. คำแนะนำด้านความปลอดภัยที่สำคัญ

เมื่อติดตั้งและใช้งานอุปกรณ์ไฟฟ้านี้ ควรปฏิบัติตามข้อควรระวังด้านความปลอดภัยพื้นฐานเสมอ ซึ่งรวมถึงสิ่งต่อไปนี้:

• ความปลอดภัยทางไฟฟ้า: Always connect the product to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not operate the pump with wet hands or while standing in water. Ensure the power cord is not damaged.
• ความปลอดภัยทางน้ำ: Never operate the pump dry. Ensure the pool is filled to the proper level before starting the system.
• การจัดการสารเคมี: Handle pool salt and other chemicals with care. Wear appropriate protective gear, such as gloves and eye protection.
• เด็ก: Keep children away from the pump and E.C.O. system during operation and maintenance.
• การซ่อมบำรุง: Always disconnect power to the unit before performing any maintenance or servicing.

3. เนื้อหาบรรจุภัณฑ์

Verify that all components are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or operate the system. Contact Intex customer service for assistance.

• Sand Filter Pump Unit
• E.C.O. Saltwater System Unit
• วาล์วควบคุม 6 ทาง
• เกจวัดแรงดัน
• ท่อยางและคลอรีนamps
• ตะกร้ากรอง
• สายไฟ
• คู่มือการใช้งาน

Image 1: Packaging for the Intex 28676 Sand Filter Pump Combo with E.C.O. System.

4. คำแนะนำในการตั้งค่า

Follow these steps for proper installation of your sand filter pump and E.C.O. system.

1. การจัดวาง: Locate the pump on a firm, level surface, at least 2 meters (6.5 feet) from the pool. Ensure the pump is positioned below the pool's water level for optimal priming.
2. การประกอบ:
   • Attach the pump to the base.
   • Mount the filter tank onto the pump base.
   • Install the 6-way control valve onto the filter tank.
   

   Image 2: The Intex 28676 Sand Filter Pump Combo unit set up on a grassy area next to a pool.
3. สื่อกรอง:
   • Remove the top cap of the filter tank.
   • Carefully add the recommended amount of filter sand or glass media. Refer to the product specifications for the correct quantity.
   • Ensure the standpipe is centered while adding media to prevent damage.
   • เปลี่ยนฝาปิดด้านบนอย่างแน่นหนา
4. การเชื่อมต่อท่อ:
   • Connect the pump's inlet to the pool's skimmer/main drain.
   • Connect the pump's outlet to the pool's return jet.
   • Connect the E.C.O. system in line with the pump's return to the pool.
   • Secure all connections with clamps เพื่อป้องกันการรั่วไหล
   

   ภาพที่ 3: รายละเอียด view of the pump's connections and the clear strainer basket lid.
5. การเชื่อมต่อไฟฟ้า: Plug the power cord into a grounded electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI).
6. การเตรียมรองพื้น: Ensure the pool is filled to the proper level. Open all necessary valves to allow water to flow into the pump. Set the 6-way valve to "Backwash" and turn on the pump briefly until water flows out of the waste port, then turn off.
7. Initial Backwash and Rinse: Perform a backwash cycle for 2-3 minutes, then a rinse cycle for 30-60 seconds. Repeat until water runs clear from the waste port.

5. คู่มือการใช้งาน

Understand the functions of the 6-way control valve and the E.C.O. system for effective pool maintenance.

5.1. 6-Way Control Valve Functions

The 6-way control valve allows you to select different operating modes for your sand filter pump. Always turn off the pump before changing the valve position.

Image 4: The 6-way control valve with clearly marked positions for various operations.

• กรอง: This is the normal operating mode for daily filtration. Water flows through the filter media and returns to the pool.
• การล้างย้อน: Cleans the filter media by reversing water flow, sending dirty water to the waste port.
• ล้าง: Used after backwash to settle the filter media and flush any remaining dirty water to waste.
• ของเสีย: Bypasses the filter, sending water directly out the waste port. Useful for vacuuming heavy debris directly to waste or lowering the pool water level.
• หมุนเวียน: Bypasses the filter, circulating water directly back to the pool. Used for chemical distribution without filtration.
• ปิด: Shuts off flow to the filter and pump. Never operate the pump with the valve in the "Closed" position.

5.2. E.C.O. System Operation

The E.C.O. (Electrocatalytic Oxidation) system generates natural chlorine from salt to sanitize your pool water.

• ระดับเกลือ: Add pool salt according to the manufacturer's recommendations for your pool volume. The E.C.O. system will indicate if salt levels are too low or too high. Maintain the recommended salt concentration for optimal performance.
• Chlorine Generation: The system converts dissolved salt into natural chlorine, which effectively kills bacteria and algae.
• ตัวจับเวลา: Use the integrated timer to set daily operating cycles for both filtration and chlorine generation. Refer to the E.C.O. system's specific instructions for programming the desired run times.

5.3. การดำเนินงานรายวัน

Run the pump and E.C.O. system for a sufficient duration each day (typically 8-12 hours, depending on pool size, usage, and environmental conditions) to maintain water clarity and sanitation.

Image 5: A person demonstrating the operation of the Intex Sand Filter Pump Combo.

6. การบำรุงรักษา

Regular maintenance ensures the longevity and efficiency of your Intex Sand Filter Pump Combo with E.C.O. System. Always disconnect power before performing maintenance.

6.1. Regular Backwash and Rinse

Monitor the pressure gauge. When the pressure rises 5-10 PSI (0.34-0.68 bar) above its clean operating pressure, it's time to backwash.

1. ปิดปั๊ม
2. Set the 6-way valve to "Backwash".
3. Turn on the pump and backwash until the water in the sight glass runs clear (approximately 2-3 minutes).
4. ปิดปั๊ม
5. Set the 6-way valve to "Rinse".
6. เปิดปั๊มและล้างเป็นเวลา 30-60 วินาที
7. ปิดปั๊ม
8. Set the 6-way valve to "Filter" for normal operation.

6.2. Pump Strainer Basket Cleaning

1. ปิดและถอดปลั๊กปั๊ม
2. ปิดวาล์วที่จำเป็นเพื่อป้องกันการไหลของน้ำจากสระ
3. Remove the strainer basket lid.
4. Remove and clean the basket of debris.
5. Inspect the O-ring for damage and lubricate if necessary.
6. Replace the basket and lid, ensuring a tight seal.

6.3. E.C.O. Cell Electrode Cleaning

The E.C.O. system will indicate when the cell needs cleaning.

1. ปิดเครื่องและถอดปลั๊กออก
2. Disconnect the cell from the system.
3. Inspect the electrodes for scale buildup.
4. Clean the electrodes by soaking them in a solution of 1 part white vinegar to 1 part water for 15-30 minutes. Do not use metal brushes or abrasive cleaners.
5. Rinse thoroughly with clean water and reassemble.

6.4. การเปลี่ยนวัสดุกรอง

Sand filter media typically needs replacement every 3-5 years, while glass media can last longer. Refer to the filter media manufacturer's guidelines for specific recommendations.

6.5. การเตรียมพร้อมสำหรับฤดูหนาว

1. Drain all water from the pump, filter tank, and E.C.O. system.
2. ถอดท่อทั้งหมดออก
3. Store the unit in a dry, frost-free location to prevent damage from freezing.

7 การแก้ไขปัญหา

This section addresses common issues you might encounter with your Intex Sand Filter Pump Combo with E.C.O. System.

8. ข้อมูลจำเพาะ

9. ข้อมูลการรับประกัน

This Intex product is covered by a รับประกัน 2 ปี from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, neglect, accident, improper installation, or unauthorized repairs.

For specific terms and conditions, please refer to the original purchase documentation or contact Intex customer service.

10. การสนับสนุนลูกค้า

For technical assistance, spare parts, or warranty claims, please contact Intex Customer Service. You can find up-to-date contact information and support resources on the official Intex webเว็บไซต์.

Webเว็บไซต์: www.intexcorp.com/support/ (อดีตample link, please refer to your region's specific Intex webงาน)