ดีลิงค์ DAP-1520

D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) User Manual

1. สินค้าหมดview

The D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) is designed to eliminate Wi-Fi dead zones and extend the coverage of your existing home wireless network. It offers AC750 performance, providing bandwidth up to 300Mbps on the 2.4GHz band and 433Mbps on the 5GHz band. This dual-band technology helps reduce interference from nearby wireless signals, ensuring a faster and more reliable connection for all your devices. The compact wall-plug design allows for flexible placement without requiring additional power cables.

คุณสมบัติหลัก

  • Extends the coverage of your home's existing wireless network.
  • Up to 750 Mbps combined speed (300 Mbps 2.4GHz and 433 Mbps 5GHz).
  • High-speed wireless AC connectivity for laptops, smartphones, and tablets.
  • Adds dual-band coverage to existing single-band routers.
  • Compatible with any wireless router brand.
  • Compact wall-plug design for easy placement.
  • WPA2/WPA wireless encryption for secure connections.
  • Wi-Fi Protected Setup (WPS) for secure setup with a button press.
ด้านหน้า view of the D-Link DAP-1520 Wi-Fi AC750 Dual Band Range Extender, a white rectangular device with a D-Link logo.

รูปที่ 1 : ด้านหน้า view of the D-Link DAP-1520 Range Extender.

ด้านหน้า view of the D-Link DAP-1520 Wi-Fi AC750 Dual Band Range Extender with a green LED indicator light.

รูปที่ 2 : ด้านหน้า view of the D-Link DAP-1520 with LED indicator.

วิดีโอ 1: จบแล้วview of the D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520), demonstrating its features and benefits in extending Wi-Fi coverage.

2. คำแนะนำในการตั้งค่า

ก่อนที่คุณจะเริ่มต้น

  • Ensure your existing wireless router is powered on and functioning correctly.
  • Note down your Wi-Fi network name (SSID) and password from your main router.
  • Place the DAP-1520 in an electrical outlet near your wireless router for initial setup.

วิธีที่ 1: WPS (Wi-Fi Protected Setup)

  1. Plug the DAP-1520 into a power outlet. Wait for the LED indicator to turn amber.
  2. Press the WPS button on your existing wireless router.
  3. Within two minutes, press the WPS button on the side of the DAP-1520.
  4. The LED indicator on the DAP-1520 will flash green, then turn solid green when a secure connection is established.
  5. Once connected, you can unplug the DAP-1520 and move it to a location between your router and the Wi-Fi dead zone. Ensure the LED remains solid green for optimal signal.
ด้านข้าง view of the D-Link DAP-1520 Wi-Fi AC750 Dual Band Range Extender, showing the WPS button and reset pinhole.

รูปที่ 3: ด้านข้าง view of the D-Link DAP-1520 showing the WPS button.

Method 2: D-Link QRS Mobile App Setup

  1. Download the D-Link QRS Mobile app from the App Store (iOS) or Google Play (Android) on your smartphone or tablet.
  2. Plug the DAP-1520 into a power outlet.
  3. Open the QRS Mobile app and follow the on-screen instructions to connect to the DAP-1520 and configure it to extend your Wi-Fi network.

วิธีที่ 3: Web การตั้งค่าเบราว์เซอร์

  1. Plug the DAP-1520 into a power outlet.
  2. On a computer or mobile device, connect to the DAP-1520's default Wi-Fi network (e.g., 'dlink-xxxx'). The default Wi-Fi name and password can be found on the configuration card or the device label.
  3. เปิด web เบราว์เซอร์และนำทางไปที่ http://dlinkap.local/ or the IP address 192.168.0.50.
  4. Follow the on-screen setup wizard to configure the extender. You will be prompted to select your existing Wi-Fi network and enter its password.
  5. Once configured, the DAP-1520 will restart. Reconnect your devices to the extended network.

3. การดำเนินการ

ทำความเข้าใจเกี่ยวกับไฟ LED Indicator

  • สีเขียวทึบ: The extender is connected to your router and providing a strong Wi-Fi signal.
  • สีเหลืองอำพันที่เป็นของแข็ง: The extender is connected to your router but the signal strength is weak. Consider moving the extender closer to your router.
  • กระพริบสีเหลืองอำพัน: The extender is booting up or attempting to connect to your router.
  • ปิด: The extender is not powered on or is not connected to a network.

Connecting Devices to the Extended Network

After successful setup, the DAP-1520 will broadcast an extended Wi-Fi network. This network will typically have the same name as your main router's Wi-Fi network with '_EXT' appended (e.g., 'MyWiFi_EXT'). Connect your wireless devices (laptops, smartphones, tablets) to this extended network using your existing Wi-Fi password.

4. การบำรุงรักษา

อัพเดตเฟิร์มแวร์

Periodically check the D-Link support website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided on the D-Link website for updating your device's firmware.

การทำความสะอาด

To clean the device, unplug it from the power outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.

การรีเซ็ตอุปกรณ์

If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset. With the device powered on, use a paperclip to press and hold the reset button (located near the WPS button) for approximately 10 seconds. The LED indicator will flash, and the device will revert to its factory default settings.

5 การแก้ไขปัญหา

This section addresses common issues you might encounter with your D-Link DAP-1520.

No Internet Connection Through Extender

  • ตรวจสอบสถานะไฟ LED: Ensure the LED indicator is solid green. If it's amber, move the extender closer to your main router.
  • ตรวจสอบการเชื่อมต่อเราเตอร์: ตรวจสอบว่าเราเตอร์หลักของคุณมีการเชื่อมต่ออินเทอร์เน็ตที่ใช้งานได้
  • Re-setup: Try performing the setup process again, ensuring correct Wi-Fi password entry.

Poor Signal Strength or Slow Speeds

  • ย้ายตำแหน่งส่วนขยาย: Position the extender roughly halfway between your router and the area with poor signal. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
  • ตรวจสอบการรบกวน: Other wireless devices (cordless phones, microwaves) operating on the same frequency can cause interference.
  • ประสิทธิภาพของเราเตอร์: ตรวจสอบให้แน่ใจว่าเราเตอร์หลักของคุณทำงานได้อย่างเหมาะสมที่สุด

Cannot Access Setup Page (dlinkap.local)

  • การเชื่อมต่อโดยตรง: Ensure your device is connected to the DAP-1520's default Wi-Fi network (e.g., 'dlink-xxxx') before attempting to access the setup page.
  • Alternative IP: ลองเข้าใช้งาน http://192.168.0.50 if http://dlinkap.local/ ไม่ทำงาน.
  • ล้างแคชเบราว์เซอร์: เคลียร์ของคุณ web แคชและคุกกี้ของเบราว์เซอร์หรือลองใช้เบราว์เซอร์อื่น

For more detailed troubleshooting, please refer to the full manual available on the official D-Link support webเว็บไซต์.

6. ข้อมูลจำเพาะทางเทคนิค

คุณสมบัติข้อมูลจำเพาะ
ยี่ห้อดีลิงค์
แบบอย่างดีเอพี-1520
มาตรฐานการสื่อสารไร้สาย802.11a/b/g/n/ac
อัตราการถ่ายโอนข้อมูลUp to 433 Megabits Per Second (5GHz)
ระดับย่านความถี่ดูอัลแบนด์ (2.4 GHz, 5 GHz)
ประเภทขั้วต่อRJ45 (Ethernet Port)
อุปกรณ์ที่รองรับLaptops, Smartphones, Tablets, etc.
น้ำหนักสินค้า0.2 ปอนด์
ขนาดสินค้า (ลึก x กว้าง x สูง)ลึก 1 นิ้ว x กว้าง 1 นิ้ว x สูง 1 นิ้ว (โดยประมาณ)
ผู้ผลิตดี-ลิงค์ ซิสเต็มส์ อิงค์
สีสีขาว
Diagram illustrating the D-Link DAP-1520 Wi-Fi AC750 Dual Band Range Extender's network coverage and technical specifications table.

Figure 4: Network coverage diagram and technical specifications.

7. การรับประกันและการสนับสนุน

ข้อมูลการรับประกัน

The D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) comes with a รับประกันจำกัด 1 ปี. Please refer to the warranty card included with your product or visit the D-Link webเว็บไซต์เพื่อดูข้อกำหนดและเงื่อนไขการรับประกันฉบับเต็ม

การสนับสนุนด้านเทคนิค

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official D-Link support webเว็บไซต์:

www.dlink.com/support

You may also find helpful resources, FAQs, and community forums on the D-Link webเว็บไซต์.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.