HOTONE TANLA1

Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp หัวหน้าคู่มือการใช้งาน

Model: TANLA1 | Brand: HOTONE

1. บทนำ

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

คุณสมบัติหลัก:

  • Ultra-compact, portable ampหัวลิเนียร์
  • Inspired by the legendary Vox AC30 ampโทนเสียงของเครื่องขยายเสียง
  • Separate Volume and Gain control knobs.
  • อีควอไลเซอร์ 3 แบนด์ (เบส กลาง แหลม) สำหรับปรับแต่งโทนเสียง
  • Integrated FX Loop for external effects integration.

2. คำแนะนำด้านความปลอดภัย

  • แหล่งจ่ายไฟ: Use only the specified 18V DC power adapter (center negative). Incorrect voltagอาจทำให้เครื่องเสียหายได้
  • การระบายอากาศ : ตรวจสอบให้แน่ใจว่ามีการระบายอากาศที่เพียงพอ อย่าปิดกั้นช่องระบายอากาศ
  • ความชื้น: เก็บเครื่องให้ห่างจากน้ำหรือความชื้นที่มากเกินไป
  • ความร้อน: หลีกเลี่ยงการวางเครื่องไว้ใกล้แหล่งความร้อนหรือโดนแสงแดดโดยตรง
  • การทำความสะอาด: ทำความสะอาดด้วยผ้าแห้งเท่านั้น
  • การบริการ: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.

3. สินค้าหมดview

Hotone Nano Legacy British Invasion Ampหัวไฟเออร์

ภาพ: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp หัว, โชว์asing its compact size and overall design.

แผงควบคุมด้านหน้า:

Hotone Nano Legacy British Invasion Front Panel Diagram

ภาพ: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

  1. อินพุต: 1/4" mono jack for connecting your guitar.
  2. เบส: Controls the low frequency response of your tone.
  3. กลาง: Controls the mid frequency response of your tone.
  4. เสียงแหลม: Controls the high frequency response of your tone.
  5. ได้รับ: Controls the pre-amp gain level, affecting distortion and sustain.
  6. ปริมาณ: ควบคุมปริมาณการส่งออกโดยรวมของ ampชีวิต.
  7. สวิตช์เปิด/ปิด: เปิดหรือปิดเครื่อง

การเชื่อมต่อแผงด้านหลัง:

Hotone Nano Legacy British Invasion Rear Panel Diagram

ภาพ: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

  1. 18V กระแสตรง: Power input for the included 18V DC adapter (center negative).
  2. โทรศัพท์/สายออก: 1/8" stereo jack for headphones or direct recording.
  3. ช่องรับสัญญาณเสียงเข้า: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
  4. ผลตอบแทน FX LOOP: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
  5. เอาต์พุตลำโพง: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
  6. ส่ง FX LOOP: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. การตั้งค่าและการเชื่อมต่อ

  1. การเชื่อมต่อไฟฟ้า: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
  2. การเชื่อมต่อกีตาร์: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
  3. การเชื่อมต่อลำโพง: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. คำเตือน: ห้ามใช้งาน amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
  4. หูฟัง/Line Out (ตัวเลือก): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
  5. ช่องต่อ AUX (อุปกรณ์เสริม): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
  6. FX Loop (ไม่บังคับ): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. คู่มือการใช้งาน

  1. เปิดเครื่อง: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
  2. การตั้งค่าเริ่มต้น: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
  3. การปรับกำไร: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
  4. การปรับระดับเสียง: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
  5. การปรับแต่งโทนเสียงด้วย EQ:
    • เบส: Adjust for low-end warmth and fullness.
    • กลาง: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
    • เสียงแหลม: Adjust for brightness and clarity.
  6. หมดแรง: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. การบำรุงรักษา

  • การทำความสะอาด: ใช้ผ้าแห้งเนื้อนุ่มทำความสะอาดด้านนอกของตัวเครื่อง amplifier. Do not use liquid cleaners, aerosols, or solvents.
  • พื้นที่จัดเก็บ: จัดเก็บ ampเก็บเครื่องขยายเสียงไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงและอุณหภูมิที่สูงหรือต่ำเกินไป
  • การขนส่ง: เมื่อทำการขนส่ง โปรดตรวจสอบให้แน่ใจว่า ampเครื่องขยายเสียงได้รับการบรรจุอย่างแน่นหนาเพื่อป้องกันความเสียหายทางกายภาพ
  • การดูแลสายเคเบิล: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีเสียงออก
  • ไม่ได้ต่อสายไฟหรือเปิดสวิตช์ไฟ
  • สายกีตาร์ชำรุดหรือเสียบไม่แน่น
  • Speaker cable faulty or not fully inserted.
  • ความไม่ตรงกันของค่าความต้านทานลำโพง
  • Volume/Gain knobs set to minimum.
  • Headphones connected to PHONES/LINE OUT.
  • Check power connection and ON/OFF switch.
  • Ensure guitar cable is secure and functional.
  • Ensure speaker cable is secure and functional.
  • Verify speaker impedance is 4-16Ω.
  • Increase Volume and Gain.
  • Disconnect headphones if using speaker output.
เสียงหึ่งหรือเสียงรบกวนมากเกินไป
  • Faulty power supply or ground loop.
  • การตั้งค่าเกนสูง
  • การรบกวนจากอุปกรณ์อิเล็กทรอนิกส์อื่น ๆ
  • Single-coil pickups (inherently more susceptible to hum).
  • Try a different power outlet or a high-quality isolated power supply.
  • Reduce gain settings.
  • เคลื่อนไหว ampวางเครื่องขยายเสียงให้ห่างจากอุปกรณ์อิเล็กทรอนิกส์อื่นๆ
  • Consider using humbucker pickups or a noise gate pedal.
เสียงเพี้ยนหรือเบาเกินไป
  • สายเคเบิลชำรุด
  • การเชื่อมต่อลำโพงไม่ถูกต้อง
  • ลำโพงชำรุด
  • สัญญาณขาเข้าแรงเกินไป
  • ตรวจสอบและเปลี่ยนสายเคเบิลหากจำเป็น
  • Ensure speaker cable is correctly connected and speaker impedance is correct.
  • Test with a different speaker if possible.
  • Reduce output from guitar or preceding pedals.

8. ข้อมูลจำเพาะ

แบบอย่าง:TANLA1
เอาท์พุต วัดtage:5 วัตต์
แหล่งพลังงาน:Corded Electric (18V DC, center negative)
อุปกรณ์ที่รองรับ:กีตาร์
ประเภทตัวเชื่อมต่อ:1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
น้ำหนักสินค้า:15.5 ออนซ์ (ประมาณ 440 กรัม)
ขนาดสินค้า :2.34 x 5.03 x 2.95 นิ้ว (ประมาณ 5.9 x 12.8 x 7.5 ซม.)
ประเภทวัสดุ :สแตนเลส
สี:สีดำ

9. ข้อมูลการรับประกัน

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webไซต์ เก็บหลักฐานการซื้อของคุณไว้เพื่อใช้ในการเรียกร้องการรับประกัน

10. การสนับสนุนลูกค้า

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webเว็บไซต์.

Visit Hotone Audio Support Page (อดีตampลิงค์จริงอาจแตกต่างกัน)

เอกสารที่เกี่ยวข้อง - TANLA1

พรีview Hotone Siva Boogie Nano Legacy Series Ampคู่มือการใช้งาน lifier Head
คู่มือการใช้งานสำหรับกีตาร์ Hotone Siva Boogie Nano Legacy Series 5W Class AB Ampส่วนหัวของเครื่องขยายเสียง แสดงรายละเอียดการควบคุมที่แผงด้านหน้าและด้านหลัง คุณสมบัติ และข้อมูลจำเพาะต่างๆ
พรีview โฮโทน Ampero II Stomp ユーザーマニュÁル
โฮโทน Ampero II Stomp CDCM HD Gen 2 Amp Modeler / Effects Processor สำหรับ V1.0.3用ユーザーマニュアルです。製品の機能、操作方法、セットアップについて詳しく解説しています。
พรีview ฮอทโทน Ampเอโร II เอสtage: รายการผลกระทบที่ครอบคลุมและข้อมูลจำเพาะ
สำรวจรายการเอฟเฟกต์อันกว้างขวาง amp แบบจำลอง การจำลองตู้ และการตอบสนองต่อแรงกระตุ้นของ Hotone Ampเอโร II เอสtage, CDCM HD Gen 2 อันทรงพลัง Amp ตัวสร้างโมเดลและตัวประมวลผลเอฟเฟ็กต์ คู่มือนี้จะอธิบายรายละเอียดพารามิเตอร์และคุณลักษณะของเอฟเฟ็กต์แต่ละตัวสำหรับนักกีตาร์
พรีview ฮอทโทน Ampคู่มือผู้ใช้ ero One: Amp คู่มือการสร้างแบบจำลองและโปรเซสเซอร์เอฟเฟกต์
สำรวจความสามารถทั้งหมดของ Hotone Ampเอโรวัน Amp ชุดเครื่องมือสร้างโมเดล/เอฟเฟ็กต์โปรเซสเซอร์ พร้อมคู่มือผู้ใช้ฉบับสมบูรณ์ เรียนรู้เกี่ยวกับการตั้งค่า การใช้งาน เอฟเฟกต์ การปรับแต่ง และการแก้ไขปัญหาสำหรับกีตาร์ของคุณ
พรีview Hotone Pulze Mini User Manual: Guide to Guitar Effects and Amp การสร้างแบบจำลอง
Comprehensive user manual for the Hotone Pulze Mini, a portable guitar effects processor. Learn about its features, connectivity, Pulze Editor software, and troubleshooting for optimal performance.
พรีview ฮอทโทน Ampอีโร Amp คู่มือผู้ใช้เครื่องจำลอง/โปรเซสเซอร์เอฟเฟกต์
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับ Hotone Ampอีโร Amp คู่มือการสร้างโมเดลและประมวลผลเอฟเฟกต์ ครอบคลุมการตั้งค่า คุณสมบัติ เอฟเฟกต์ การปรับแต่ง และการแก้ไขปัญหาสำหรับเฟิร์มแวร์เวอร์ชัน 3.2