เอ็มเอ็กซ์อาร์ เอ็ม222

MXR M222 Talk Box Instruction Manual

Model: M222 | Brand: MXR

การแนะนำ

The MXR M222 Talk Box is a compact and pedalboard-friendly effects unit designed to produce the classic talk box sound. This device integrates its own amplifier and speaker driver, eliminating the need for a separate rig or patching into your amplifier's speaker output. It features Volume, Tone, and Gain controls, allowing for precise shaping of the talk box effect. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your MXR M222 Talk Box.

เนื้อหาแพ็คเกจ

  • MXR M222 Talk Box Pedal
  • พาวเวอร์ซัพพลาย 18 โวลต์
  • 8-foot Surgical Tube
  • Mic Stand Clip

การตั้งค่า

1. การเชื่อมต่อพาวเวอร์ซัพพลาย

Connect the included 18-volt power supply to the power input jack on the rear of the Talk Box. Ensure the power supply is connected to a suitable electrical outlet.

หลัง view of MXR Talk Box showing input, output, and power jack
รูปที่ 1: ด้านหลัง view of the MXR Talk Box, highlighting the input, output, and 18V power jack.

2. Instrument and Ampการเชื่อมต่อ lifier

Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the Talk Box using a standard 1/4-inch instrument cable. Connect the OUTPUT jack of the Talk Box to your ampต่อสายสัญญาณเสียงขนาด 1/4 นิ้วอีกเส้นหนึ่งเข้ากับช่องสัญญาณเข้าของแอมป์

3. Attaching the Surgical Tube

Insert one end of the 8-foot surgical tube into the tube connector on the top of the Talk Box. Secure the other end of the tube to your microphone stand using the provided mic stand clip, positioning the open end of the tube near your mouth for vocal articulation.

ด้านข้าง view of MXR Talk Box with tube inserted
รูปที่ 2: ด้านข้าง view of the MXR Talk Box with the surgical tube properly inserted into the top connector.
ฝั่งตรงข้าม view of MXR Talk Box with footswitch
รูปที่ 3: ด้านตรงข้าม view of the MXR Talk Box, showing the footswitch and overall compact design.

4. การจัดวางไมโครโฟน

Position your vocal microphone to pick up the sound from the open end of the surgical tube. The microphone should be close to the tube's opening to capture the modulated sound effectively.

การดำเนินการ

1. Activating the Effect

Press the footswitch on the Talk Box to engage or bypass the effect. The LED indicator will illuminate when the effect is active.

ด้านหน้า view of MXR Talk Box with footswitch and controls
รูปที่ 4 : ด้านหน้า view of the MXR Talk Box, showing the footswitch and control knobs.

2. ปุ่มควบคุม

  • ปริมาณ: Adjusts the overall output level of the Talk Box effect.
  • โทนเสียง: Shapes the tonal characteristics of the effect, from darker to brighter.
  • ได้รับ: Controls the amount of distortion or overdrive applied to the signal before it enters the talk box.

3. Using the Talk Box Effect

While playing your instrument and with the Talk Box engaged, place the open end of the surgical tube into your mouth. Articulate words or shape your mouth to create vocal-like sounds with your instrument's signal. The sound is then picked up by your vocal microphone and sent to the PA system.

Video 1: Official MXR M222 Talk Box demonstration, showcasing setup and various sounds achievable with the pedal.

การซ่อมบำรุง

1. การทำความสะอาด

Wipe the exterior of the Talk Box with a soft, dry cloth. Do not use abrasive cleaners or solvents. The surgical tube can be cleaned with mild soap and water, ensuring it is thoroughly dry before re-use.

2. การเปลี่ยนท่อ

The surgical tube is designed for durability but may require replacement over time due to wear or hygiene. Replacement tubes are available from authorized MXR dealers.

การแก้ไขปัญหา

  • ไม่มีเสียง: ตรวจสอบการเชื่อมต่อสายเคเบิลทั้งหมด (อุปกรณ์, amplifier, power). Ensure the Talk Box is receiving power and the footswitch LED is illuminated when engaged. Verify your instrument and ampเครื่องขยายเสียงทำงานได้อย่างถูกต้อง
  • Weak Effect: Adjust the VOLUME and GAIN knobs on the Talk Box. Ensure your microphone is properly positioned to capture the sound from the surgical tube. Check the microphone's input level on your mixer/PA system.
  • Unwanted Noise/Feedback: Reduce the GAIN setting. Ensure proper grounding of all equipment. Adjust microphone placement to minimize feedback.
  • Tube Issues: If the surgical tube is kinked, blocked, or damaged, it can affect sound quality. Ensure it is clear and properly connected.

ข้อมูลจำเพาะ

คุณสมบัติข้อมูลจำเพาะ
หมายเลขรุ่นM222
ขนาดสินค้า (กว้าง x ยาว x สูง)10.25" x 9.5" x 4.25"
น้ำหนักสินค้า4.5 ปอนด์
เล่มที่tage18 โวลต์
Ampอีเรจ9 มิลลิวินาทีamps
เอฟเฟกต์เอาต์พุตเสียงกล่องพูดคุย
ประเภทการควบคุมลูกบิด
แหล่งพลังงานสายไฟ
ฮาร์ดแวร์อินเตอร์เฟซเสียงขนาด 1/4 นิ้ว
รูปแบบสัญญาณอนาล็อก
ประเภทขั้วต่อแจ็คเสียงขนาด 1/4 นิ้ว (6.35 มม.)
ด้านล่าง view of MXR Talk Box showing serial number and rubber feet
รูปที่ 5: ด้านล่าง view of the MXR Talk Box, showing the product label and rubber feet for stability.

ข้อมูลการรับประกัน

Dunlop Manufacturing, Inc. will repair or replace, at its discretion, defective workmanship or materials on all new Dunlop electronics directly or through the selling dealer or authorized service technician, for one year from the date of purchase, at no cost to the original purchaser. Repair or replacement parts installed will then be warrantied for the unexpired portion of the original warranty term.

สนับสนุน

For further assistance, technical support, or to inquire about replacement parts, please contact your authorized MXR dealer or visit the official Dunlop webไซต์ โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกัน

© 2023 MXR / Dunlop Manufacturing, Inc. สงวนลิขสิทธิ์ทุกประการ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.