HERTZ DS-303

HERTZ Dieci Series DS-303 12-inch Subwoofer Instruction Manual

รุ่น : DS-303

การแนะนำ

Thank you for choosing the HERTZ Dieci Series DS-303 Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

The HERTZ Dieci Series DS-303 is a 12-inch (300mm) car audio subwoofer designed for high efficiency and exceptional power handling. It features a polypropylene membrane and butyl rubber surround for high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation. This subwoofer is suitable for use in compact sealed or reflex enclosures.

ข้อมูลด้านความปลอดภัย

ปฏิบัติตามข้อควรระวังเพื่อความปลอดภัยต่อไปนี้เสมอ:

  • Disconnect the vehicle's battery negative terminal before starting any installation work to prevent electrical shorts.
  • ตรวจสอบให้แน่ใจว่าสายไฟทั้งหมดได้รับการหุ้มฉนวนและยึดอย่างถูกต้องเพื่อป้องกันความเสียหายจากการสั่นสะเทือนหรือขอบคม
  • อย่าติดตั้งซับวูฟเฟอร์ในตำแหน่งที่กีดขวางการทำงานของไดรเวอร์ view หรือรบกวนระบบความปลอดภัยของยานพาหนะ (เช่น ถุงลมนิรภัย)
  • ควรใช้สายไฟที่มีขนาดเหมาะสมสำหรับการเชื่อมต่อแหล่งจ่ายไฟและลำโพง เพื่อรองรับความต้องการกำลังไฟของซับวูฟเฟอร์
  • Avoid exposing the subwoofer to excessive moisture or direct sunlight.
  • ปรึกษาผู้ติดตั้งมืออาชีพหากคุณไม่แน่ใจเกี่ยวกับส่วนใดส่วนหนึ่งของกระบวนการติดตั้ง

มีอะไรอยู่ในกล่อง

เมื่อแกะกล่องแล้ว โปรดตรวจสอบให้แน่ใจว่ามีสิ่งของครบทั้งหมด:

  • HERTZ Dieci Series DS-303 Subwoofer
  • คู่มือการใช้งาน (เอกสารนี้)
  • สกรูสำหรับติดตั้ง (หากผู้ผลิตจัดมาให้)

Note: Additional accessories such as speaker wire, amplifier, and enclosure are sold separately.

การติดตั้งและการตั้งค่า

Proper installation is crucial for optimal performance. This section outlines general guidelines. Specific enclosure design and wiring diagrams may vary based on your vehicle and ampการตั้งค่าตัวขยายสัญญาณ

1. การเลือกและการเตรียมตู้หรือกล่องหุ้ม

The DS-303 subwoofer is designed for use in compact sealed or reflex (vented) enclosures. Refer to the subwoofer's specifications for recommended enclosure volumes.

HERTZ Dieci Series DS-303 Subwoofer, rear view แสดงแม่เหล็กและขั้วต่อ

ภาพ: ด้านหลัง view of the HERTZ Dieci Series DS-303 Subwoofer, displaying the magnet structure and wiring terminals.

  • Ensure the enclosure is robust and free from air leaks.
  • Cut a circular opening in the enclosure baffle that matches the subwoofer's mounting diameter.
  • Pre-drill pilot holes for the mounting screws to prevent damage to the enclosure or subwoofer frame.

2. การเชื่อมต่อสายไฟ

The DS-303 features a 4-Ohm Single Voice Coil (SVC). Connect the subwoofer to a compatible ampเอาท์พุท lifier

HERTZ Dieci Series DS-303 Subwoofer, front view

ภาพ: ด้านหน้า view of the HERTZ Dieci Series DS-303 Subwoofer, highlighting the polypropylene cone.

  • Connect the positive (+) terminal of the subwoofer to the positive (+) terminal of the amplifier's subwoofer output.
  • Connect the negative (-) terminal of the subwoofer to the negative (-) terminal of the amplifier's subwoofer output.
  • ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทั้งหมดมีความปลอดภัยและไม่มีไฟฟ้าลัดวงจร
  • Use appropriate gauge speaker wire for the power handling of the subwoofer and the distance to the ampชีวิต.

3 การติดตั้งซับวูฟเฟอร์

HERTZ Dieci Series DS-303 Subwoofer, angled view

ภาพ: มุมเอียง view of the HERTZ Dieci Series DS-303 Subwoofer, showing the robust frame and mounting holes.

  • Carefully place the subwoofer into the prepared opening in the enclosure.
  • Align the mounting holes on the subwoofer frame with the pre-drilled holes in the enclosure.
  • Secure the subwoofer using the provided mounting screws. Tighten screws evenly in a crisscross pattern to ensure a tight, even seal. Do not overtighten.

คำแนะนำการใช้งาน

Once installed, follow these steps to operate your HERTZ DS-303 Subwoofer:

  1. การเพิ่มพลังเริ่มต้น: After all connections are made and verified, reconnect the vehicle's battery. Turn on your car audio system.
  2. Ampการตั้งค่าไลเออร์: ปรับค่าเกน ความถี่ครอสโอเวอร์ และเฟสบนอุปกรณ์ของคุณ amplifier according to your system's requirements and personal preference. Start with low gain and gradually increase.
  3. ระยะเวลาการปรับตัว: Allow a break-in period of approximately 10-20 hours of normal listening at moderate volumes. This allows the subwoofer's suspension components to loosen and achieve optimal performance.
  4. การควบคุมระดับเสียง: Avoid operating the subwoofer at excessively high volumes for extended periods, as this can lead to overheating and damage. If you hear distortion, reduce the volume immediately.

การซ่อมบำรุง

The HERTZ DS-303 Subwoofer requires minimal maintenance to ensure long-lasting performance:

  • การทำความสะอาด: ใช้ผ้าแห้งเนื้อนุ่มเช็ดทำความสะอาดกรวยและบริเวณรอบๆ อย่างเบามือ หลีกเลี่ยงการใช้สารเคมีรุนแรงหรือน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
  • การตรวจสอบ: Periodically inspect the subwoofer for any signs of damage to the cone, surround, or dust cap. Check wiring connections for tightness and corrosion.
  • การปกป้องสิ่งแวดล้อม: Keep the subwoofer free from dust, debris, and extreme temperatures.

การแก้ไขปัญหา

หากคุณประสบปัญหาเกี่ยวกับซับวูฟเฟอร์ โปรดดูปัญหาทั่วไปและวิธีแก้ไขต่อไปนี้:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีเสียงจากซับวูฟเฟอร์
  • Ampเครื่องขยายเสียงไม่ได้เปิดใช้งาน
  • สายไฟหลวมหรือไม่ถูกต้อง
  • Ampตัวระบุในโหมดป้องกัน
  • การตั้งค่าชุดอุปกรณ์หลัก
  • ตรวจสอบ ampการต่อไฟเลี้ยงและกราวด์
  • ตรวจสอบการเชื่อมต่อลำโพงและ RCA ทั้งหมด
  • ตรวจสอบ ampฟิวส์เครื่องขยายเสียง ถอดปลั๊กไฟ รอสักครู่ แล้วเสียบปลั๊กกลับเข้าไปใหม่
  • ตรวจสอบให้แน่ใจว่าเอาต์พุตซับวูฟเฟอร์เปิดใช้งานอยู่และระดับเสียงบนชุดอุปกรณ์หลักอยู่ที่ระดับสูงสุด
เสียงเบสบิดเบี้ยวหรือไม่ชัดเจน
  • Ampค่าเกนของลิฟเวอร์สูงเกินไป
  • การตั้งค่าครอสโอเวอร์ไม่ถูกต้อง
  • การเคลื่อนที่เกินระยะของซับวูฟเฟอร์
  • ปัญหาการแนบเอกสาร
  • ลด ampกำไร lifier
  • Adjust low-pass filter (LPF) on amplifier หรือหัวหน้าหน่วย
  • ลดระดับเสียง
  • ตรวจสอบตัวเครื่องว่ามีรอยรั่วของอากาศหรือความเสียหายหรือไม่
ซับวูฟเฟอร์ร้อนขึ้น
  • การกลบเสียงซับวูฟเฟอร์
  • การจับคู่ความต้านทานที่ไม่เหมาะสม
  • การระบายความร้อนไม่เพียงพอ
  • ลดระดับเสียงลง หรือ ampกำไร lifier
  • ทำให้มั่นใจ amplifier impedance matches subwoofer (4 Ohm).
  • ตรวจสอบให้แน่ใจว่ามีการระบายอากาศที่เพียงพอรอบๆ ซับวูฟเฟอร์ และ ampชีวิต.

If the problem persists after trying these solutions, contact HERTZ customer support or a qualified car audio technician.

ข้อมูลจำเพาะทางเทคนิค

คุณสมบัติข้อมูลจำเพาะ
แบบอย่างDS-303
ขนาด300 มิลลิเมตร (12 นิ้ว)
การจัดการพลังงาน (จุดสูงสุด)1000 วัตต์
Power Handling (Continuous RMS)250 วัตต์
อิมพีแดนซ์4 Ω (Ohm)
การตอบสนองความถี่28 • 300 เฮิรตซ์
ความไวต่อความรู้สึก91 เดซิเบล SPL
เส้นผ่านศูนย์กลางคอยล์เสียง38 มิลลิเมตร (1.5 นิ้ว)
วัสดุแม่เหล็กเฟอร์ไรท์ฟลักซ์ความหนาแน่นสูง
วัสดุรูปกรวยPolypropylene with Mica injection
วัสดุรอบทิศทางยางบิวทิล
Xmax (การเคลื่อนที่เชิงเส้นสูงสุด)9 มม.
น้ำหนักสินค้า8.8 ปอนด์ (4 กก.)
เทคโนโลยีการเชื่อมต่อมีสาย
ผู้ผลิตElecttromedia

ข้อมูลการรับประกัน

The HERTZ Dieci Series DS-303 Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official HERTZ website for detailed terms and conditions. This warranty typically covers manufacturing defects for a specified period from the date of purchase.

Note: Damage caused by improper installation, abuse, accident, or unauthorized modifications is not covered under warranty.

การสนับสนุนลูกค้า

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact HERTZ customer support:

  • Webเว็บไซต์: www.hertzaudio.com
  • อีเมล: อ้างถึงเจ้าหน้าที่ webเว็บไซต์สำหรับแบบฟอร์มติดต่อหรือที่อยู่อีเมล
  • โทรศัพท์: อ้างถึงเจ้าหน้าที่ webเว็บไซต์สำหรับหมายเลขติดต่อในภูมิภาค

When contacting support, please have your product model (DS-303) and proof of purchase readily available.

© 2023 เฮิร์ตซ์ สงวนลิขสิทธิ์ทุกประการ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.