SUPERNIGHT RGB LED Light Strip Remote Controller Instruction Manual

สินค้าเกินview

The SUPERNIGHT 44 Key Wireless IR Remote Controller is designed to provide versatile control over your SMD 5050, 3528, and 2835 RGB LED light strips. This controller allows for a wide range of color selections, brightness adjustments, and dynamic lighting effects, enhancing the ambiance of any space.

Image: The SUPERNIGHT 44 Key Wireless IR Remote Controller shown alongside its white control box, which connects to the LED strip.

คุณสมบัติหลัก:

• มัลติฟังก์ชั่น: Offers 20 static colors and 5 dynamic light patterns including Static, Flash, Strobe, Fade-change, and RGB Smooth-change.
• การปรับแต่ง: Easily turn ON/OFF, DIY colors, and adjust brightness levels.
• ความเข้ากันได้: Works with SMD 5050, 3528, and 2835 RGB LED light strips that use 4-Pin connectors. Not compatible with RGBW strips (5-pin connectors).
• รีโมท IR: Infrared remote control with an effective range of approximately 30 feet. Requires direct line-of-sight to the IR receiver.
• ความปลอดภัย: Input DC 12V, Max output current 12A. CE, RoHS, FCC certified for low voltage, low heat, and no radiation.

Image: A close-up of the 44-key remote controller, highlighting the various color selection buttons, brightness controls, and mode buttons (Flash, Strobe, Fade, Jump).

คำแนะนำการตั้งค่า

1. เตรียมรีโมท:

   Before first use, remove the clear plastic film from the battery compartment of the remote control. The remote uses a CR2025 coin cell battery.

   

   Image: A hand pulling a clear plastic tab from the battery slot of the remote control, indicating the battery is ready for use.
2. Connect the LED Strip to the IR Controller:

   Ensure the 4-pin connector from your RGB LED light strip is correctly aligned with the 4-pin port on the IR control box. Look for the arrow symbol on both the strip connector and the control box connector and align them for proper connection. Incorrect alignment will prevent the lights from illuminating.

   

   Image: A close-up showing the 4-pin connector of an LED strip being inserted into the IR control box, with arrows indicating correct alignment.

3. Connect Power to the IR Controller:

   Plug the DC 12V power adapter (not included with this remote controller, but typically comes with LED strip kits) into the DC input jack on the IR control box.

   

   Image: A hand plugging a black DC power adapter into the white IR control box.

4. Position the IR Receiver:

   Ensure the small black IR receiver eye, which is attached to the control box, is exposed and has a clear line of sight to where you will be using the remote. Obstructions will block the signal.

   

   Image: The remote control is shown pointing towards the small black IR sensor, emphasizing the need for direct line of sight for the remote to function.

คู่มือวิดีโอการตั้งค่า:

คำแนะนำการใช้งาน

The 44-key remote offers comprehensive control over your LED light strip. Familiarize yourself with the button layout for optimal use.

Image: An annotated diagram of the 44-key remote, explaining the function of each button, including color selection, brightness, and dynamic modes.

• เปิด/ปิดเครื่อง: ใช้ ON และ ปิด buttons at the top right to power the lights.
• การปรับความสว่าง: ใช้ V+ และ V- buttons (top left) to increase or decrease the brightness of the lights.
• การเลือกสีแบบคงที่: The remote features 20 pre-set static colors. Simply press the desired color button to change the LED strip's color.
• โหมดไดนามิก:
  • แฟลช: เปลี่ยนสีอย่างรวดเร็ว
  • แฟลช: กระพริบเป็นสีเดียว
  • เฟด3/เฟด7: Smoothly transitions between 3 or 7 colors.
  • กระโดด3/กระโดด7: Jumps between 3 or 7 colors.
  • เร็ว/ช้า: ปรับความเร็วของโหมดไดนามิก
  • อัตโนมัติ: สลับโหมดการทำงานแบบไดนามิกทั้งหมดโดยอัตโนมัติ
• DIY Color Creation:

  The remote allows you to create and save up to 6 custom colors using the DIY buttons (DIY1-DIY6).

  1. กดหนึ่งใน of ทำเอง buttons (e.g., DIY1).
  2. Use the Red, Green, and Blue arrow buttons (↑ / ↓) to adjust the intensity of each primary color until you achieve your desired custom color.
  3. กดเหมือนเดิม ทำเอง button again to save the custom color.
  4. To recall your saved custom color, simply press the corresponding ทำเอง ปุ่ม.

Image: A hand holding the remote control, demonstrating its use to change the colors of an LED strip installed behind a television, illustrating its application in home lighting.

การซ่อมบำรุง

• การเปลี่ยนแบตเตอรี่: If the remote's response becomes sluggish or stops working, replace the CR2025 coin cell battery. Refer to the setup instructions for battery compartment access.
• การทำความสะอาด: Wipe the remote and control box with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• พื้นที่จัดเก็บ: ควรเก็บรีโมทไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงและอุณหภูมิที่สูงหรือต่ำเกินไป เมื่อไม่ได้ใช้งานเป็นเวลานาน

การแก้ไขปัญหา

ข้อมูลจำเพาะ

การรับประกัน

This SUPERNIGHT product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

สนับสนุน

For further assistance, technical support, or warranty inquiries, please visit the official SUPERNIGHT store on Amazon or contact their customer service directly through the Amazon platform.

Visit the SUPERNIGHT Store on Amazon