ACV 42-1190-101 Steering Wheel Control Adapter User Manual

สินค้าเกินview

The ACV 42-1190-101 Steering Wheel Control Adapter allows you to retain the functionality of your vehicle's existing steering wheel remote controls when installing an aftermarket car radio. This adapter ensures seamless integration, providing convenience and safety by keeping essential controls accessible on your steering wheel.

Image: The ACV 42-1190-101 Steering Wheel Control Adapter, showing its compact design and wiring harness connections.

ความเข้ากันได้

This adapter is compatible with specific Mercedes-Benz models and OEM radios:

• Mercedes C-Class (W203): 2000 – มีนาคม 2004
• Mercedes CLK-Class (W208): Up to May 2003
• Mercedes CLK-Class (W209): Up to June 2004
• Mercedes E-Class (W210): ตั้งแต่ปี 2003 เป็นต้นไป
• Mercedes SL-Class (R230): From July 2004 onwards

Designed for models with an interior CAN-BUS system and compatible with the following OEM radios (featuring a 10-pin ISO connector): Audio 10, Audio 30, and APS (D2B).

การตั้งค่า

ก่อนการติดตั้ง

• Ensure your vehicle and aftermarket radio are compatible with this adapter.
• Disconnect the vehicle's negative battery terminal before beginning any electrical work to prevent short circuits or damage.
• Gather all necessary tools, including wire strippers, crimpers, electrical tape, and a trim removal tool.

ขั้นตอนการติดตั้ง

1. ถอดแบตเตอรี่: Ensure the vehicle's negative battery terminal is disconnected.
2. ถอดวิทยุเดิมออก: Carefully remove the existing factory radio from the dashboard using appropriate trim removal tools.
3. ถอดสายไฟจากโรงงานออก: Disconnect the factory wiring harness and antenna cable from the original radio.
4. เชื่อมต่ออะแดปเตอร์เข้ากับรถยนต์: Connect the vehicle-specific connector of the ACV 42-1190-101 adapter to the factory wiring harness in your car. Ensure all connections are secure.
5. Connect Adapter to Aftermarket Radio: Connect the other end of the ACV adapter harness to your new aftermarket radio. Follow the wiring diagram provided with your aftermarket radio for specific connections (e.g., power, ground, speaker, steering wheel control input).
6. การเดินสายไฟที่ปลอดภัย: Neatly route and secure all wiring to prevent pinching or interference.
7. ทดสอบการเชื่อมต่อ: Before fully reassembling, temporarily reconnect the battery and test the basic functions of the aftermarket radio and steering wheel controls.
8. Reinstall Radio: Once confirmed working, disconnect the battery again, then carefully slide the aftermarket radio into the dashboard opening and secure it.
9. เชื่อมต่อแบตเตอรี่อีกครั้ง: ต่อขั้วแบตเตอรี่ลบของรถกลับเข้าที่
10. การทดสอบครั้งสุดท้าย: Perform a final test of all radio functions and steering wheel controls.

คำแนะนำการใช้งาน

The ACV 42-1190-101 adapter is pre-programmed to translate the signals from your Mercedes-Benz steering wheel controls to your aftermarket radio. Once installed correctly, your steering wheel buttons should function as follows:

• เพิ่ม/ลดระดับเสียง: Adjusts the audio volume of your aftermarket radio.
• Track Up/Down: Changes to the next or previous track/station.
• โหมด/แหล่งที่มา: Switches between different audio sources (e.g., radio, CD, USB, Bluetooth).
• Other buttons may have specific functions depending on your vehicle and aftermarket radio model. Refer to your aftermarket radio's manual for detailed button assignments.

การซ่อมบำรุง

The ACV 42-1190-101 Steering Wheel Control Adapter requires minimal maintenance. To ensure optimal performance and longevity:

• ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทางไฟฟ้าทั้งหมดแน่นหนาและปราศจากสนิม
• Avoid exposing the adapter to excessive moisture or extreme temperatures.
• Do not attempt to open or modify the adapter unit, as this may void any potential warranty and could cause damage.

การแก้ไขปัญหา

If you encounter issues with your steering wheel control adapter, refer to the following troubleshooting steps:

• การควบคุมไม่ตอบสนอง:
  • Verify all connections between the adapter, vehicle harness, and aftermarket radio are firm and correct according to the wiring diagrams.
  • Ensure your vehicle and aftermarket radio are listed as compatible models.
  • Check the aftermarket radio's settings to ensure the steering wheel control input is enabled and configured correctly.
• ฟังก์ชั่นไม่ต่อเนื่อง:
  • Inspect wiring for any loose connections or damaged insulation that could cause intermittent contact.
  • Ensure the adapter unit itself is securely mounted and not subject to excessive vibration.
• No Power to Radio After Installation:
  • Check the vehicle's fuses related to the radio and accessory power.
  • Confirm the power and ground connections from the adapter to the aftermarket radio are correct.

If problems persist after following these steps, contact ACV Electronic support or a qualified car audio technician.

ข้อมูลจำเพาะ

ข้อมูลการรับประกัน

Specific warranty details for the ACV 42-1190-101 Steering Wheel Control Adapter are not provided in this manual. For information regarding warranty coverage, duration, and claims, please refer to the documentation included with your purchase or contact the retailer or ACV Electronic directly.

สนับสนุน

For further assistance, technical support, or inquiries not covered in this manual, please contact ACV Electronic customer support. You can typically find contact information on the manufacturer's official webไซต์หรือผ่านผู้ค้าปลีกผลิตภัณฑ์ของคุณ