Amana DS01E

Amana DS01E Wireless PTAC/Wall Remote Thermostat User Manual

การแนะนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your Amana DS01E Wireless PTAC/Wall Remote Thermostat. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage.

ข้อมูลด้านความปลอดภัย

  • ปฏิบัติตามกฎและข้อบังคับด้านไฟฟ้าในท้องถิ่นเสมอระหว่างการติดตั้ง
  • Disconnect power to the PTAC unit before performing any wiring or maintenance.
  • อย่าให้เทอร์โมสตัทสัมผัสกับอุณหภูมิที่สูงหรือความชื้นสูงหรือแสงแดดโดยตรง
  • เก็บอุปกรณ์ให้พ้นจากมือเด็ก
  • ใช้เฉพาะแบตเตอรี่ชนิดที่ระบุเท่านั้น (แบตเตอรี่ AA 2 ก้อน)

เนื้อหาแพ็คเกจ

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

  • Amana DS01E Wireless Remote Thermostat
  • ฮาร์ดแวร์สำหรับติดตั้ง (สกรูและพุกยึดผนัง)
  • คู่มือการใช้งาน (เอกสารนี้)

การตั้งค่า

1. การติดตั้งแบตเตอรี่

  1. Gently open the battery compartment cover on the back of the thermostat.
  2. ใส่แบตเตอรี่อัลคาไลน์ AA สอง (2) ก้อน โดยตรวจสอบให้แน่ใจว่าขั้วถูกต้อง (+/-)
  3. ปิดฝาช่องใส่แบตเตอรี่ให้แน่น

2 การติดตั้งเทอร์โมสตัท

The Amana DS01E is designed for wall mounting. Choose a central location on an interior wall, away from direct sunlight, drafts, or heat sources that could affect temperature readings.

  1. Separate the front cover from the backplate of the thermostat.
  2. Position the backplate on the wall at your desired height.
  3. Mark the screw hole locations using a pencil.
  4. หากจำเป็น ให้เจาะรูนำร่องก่อน แล้วจึงใส่พุกยึดผนัง
  5. ยึดแผ่นหลังเข้ากับผนังโดยใช้สกรูที่ให้มา
  6. Carefully snap the front cover onto the mounted backplate.
Amana DS01E Wireless PTAC/Wall Remote Thermostat, front view

ภาพ: ด้านหน้า view of the Amana DS01E Wireless PTAC/Wall Remote Thermostat. The image shows the rectangular white thermostat with a digital display and several control buttons below it. This is the main unit that will be mounted on the wall.

3. Pairing with PTAC Unit

The DS01E thermostat must be paired with a compatible Amana PTAC unit to function wirelessly. Refer to your PTAC unit's manual for specific pairing instructions, as procedures may vary. Generally, the process involves:

  1. Ensuring both the thermostat and the PTAC unit are powered on.
  2. Activating a 'pairing mode' on the PTAC unit (often a button press sequence or a setting in its control panel).
  3. Initiating a 'pairing search' on the DS01E thermostat (refer to the thermostat's display for prompts or specific button combinations).
  4. Confirming successful pairing, usually indicated by a message on the thermostat's display or an audible signal from the PTAC unit.

คำแนะนำการใช้งาน

การควบคุมพื้นฐาน

The Amana DS01E thermostat features button controls for easy operation. The display will show the set temperature and current operating mode.

  • การปรับอุณหภูมิ: ใช้ UP และ ลง arrow buttons to increase or decrease the desired temperature setting.
  • การเลือกโหมด: กดปุ่ม โหมด button to cycle through available operating modes (e.g., Heat, Cool, Fan, Off). The active mode will be displayed.
  • ความเร็วพัดลม: If applicable, a FAN button may allow adjustment of fan speed (e.g., Low, Medium, High, Auto).
  • แสงไฟด้านหลัง: The display features a backlight for visibility in low-light conditions. It typically activates with any button press and remains on for a short period.

บันทึก: This thermostat displays the ชุด temperature, not the current room temperature. Users should be aware that the actual room temperature is not shown on the unit's display.

การซ่อมบำรุง

การเปลี่ยนแบตเตอรี่

When the battery indicator appears on the display, replace the batteries promptly to ensure continuous operation. Follow the battery installation steps outlined in the Setup section.

การทำความสะอาด

ในการทำความสะอาดเทอร์โมสตัท ให้เช็ดภายนอกเบาๆ ด้วยผ้านุ่มๆamp cloth. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the unit, as this may damage the plastic or electronic components.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
จอแสดงผลเทอร์โมสตัทว่างเปล่าแบตเตอรี่เสียหรือติดตั้งไม่ถูกต้องเปลี่ยนแบตเตอรี่ด้วยแบตเตอรี่อัลคาไลน์ AA ใหม่ โดยตรวจสอบให้แน่ใจว่าใส่ขั้วถูกต้อง
Thermostat not controlling PTAC unit.Not paired with PTAC unit; PTAC unit power off; signal interference.Ensure PTAC unit is powered on. Re-attempt pairing process. Check for obstructions or strong interference sources.
การอ่านอุณหภูมิดูเหมือนจะไม่แม่นยำเทอร์โมสตัทตั้งอยู่ใกล้แหล่งความร้อน ลมโกรก หรือแสงแดดโดยตรงRelocate the thermostat to a more suitable, central interior wall location.
Thermostat does not show current room temperature.This model is designed to display the ชุด อุณหภูมิเท่านั้นThis is normal operation for the DS01E model. No action required.

ข้อมูลจำเพาะ

ยี่ห้อAmana
หมายเลขรุ่นDS01E
แหล่งพลังงาน2 AA batteries (for remote thermostat)
น้ำหนักสินค้า0.55 ปอนด์ (249 กรัม)
วัสดุพลาสติก
ประเภทการควบคุมปุ่มควบคุม
วิธีการควบคุมระยะไกล
ประเภทการติดตั้งติดผนัง
แสงไฟแบ็คไลท์ใช่
ขนาด (กxยxส)13.3 x 13.3 x 13.3 เซนติเมตร
UPC / GTIN663051499157

การรับประกันและการสนับสนุน

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Amana webไซต์ โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ

© 2023 อมานา สงวนลิขสิทธิ์ทุกประการ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.