1. สินค้าหมดview
The BriskHeat DHCS13 is a standard heavy-duty drum heater designed for metal drums and pails, specifically fitting 30-gallon (114L) containers. This heater provides efficient and uniform heating for various materials, utilizing a robust construction for durability and safety.
Its design incorporates a patented 360-degree grounded multi-stranded heating element, laminated between two extra-thick layers of 20mil fiberglass-reinforced silicone rubber. This construction ensures excellent strength, durability, and uniform heat distribution, meeting NEC 427.23 standards. The unit is moisture and chemical resistant and features an adjustable thermostat for precise temperature control.

Image 1.1: The BriskHeat DHCS13 drum heater shown installed on a black 30-gallon metal drum. The orange heating bands are visible wrapped around the drum, secured by spring closures.
2. ข้อมูลด้านความปลอดภัย
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure the heater is used only on metal drums and pails as specified. Do not use on plastic drums.
- ตรวจสอบว่าแหล่งจ่ายไฟมีแรงดันไฟtage matches the heater's requirements (120VAC).
- Always ensure the heater is properly grounded. The unit includes a standard 3-prong plug (NEMA 5-15) for this purpose.
- Do not operate the heater in explosive atmospheres or near flammable vapors unless specifically rated for such environments. This heater is not intrinsically safe.
- Avoid direct contact with the heating surface during operation, as temperatures can reach up to 450°F (232°C).
- Do not immerse the heater in liquid. It is moisture and chemical resistant, but not submersible.
- โปรดถอดปลั๊กไฟก่อนทำการบำรุงรักษาหรือปรับแต่งใดๆ
- เก็บสายไฟให้ห่างจากพื้นผิวที่ร้อนและขอบคม
- Do not modify the heater or its components. Use only genuine BriskHeat replacement parts if necessary.
3. การแกะกล่องและเนื้อหา
Carefully unpack the BriskHeat DHCS13 drum heater from its packaging. Inspect the unit for any signs of shipping damage. If damage is observed, do not proceed with installation and contact your supplier immediately.
เนื้อหาแพ็คเกจ:
- BriskHeat DHCS13 Drum Heater (1 unit)
4. การตั้งค่าและการติดตั้ง
The DHCS13 drum heater is designed for easy installation on 30-gallon metal drums.
- Prepare the Drum: Ensure the metal drum is clean and free from any debris or flammable residues on its exterior surface where the heater will be applied.
- ตำแหน่งเครื่องทำความร้อน: Wrap the DHCS13 drum heater around the circumference of the 30-gallon metal drum. Position it at the desired height, typically around the lower or middle section of the drum, depending on the material to be heated.
- Secure the Heater: The heater features a spring closure mechanism. Expand the spring closure as needed (up to 3 inches / 76mm) to securely fasten the heater around the drum. Ensure the heater fits snugly against the drum surface for optimal heat transfer.
- เชื่อมต่อพลังงาน: Plug the 6ft (1.8m) long power cord with its standard 3-prong plug (NEMA 5-15) into a properly grounded 120VAC electrical outlet. Ensure the outlet is capable of supplying 1000 watts.
- การตรวจสอบเบื้องต้น: Before setting the temperature, ensure the heater is firmly attached and the power cord is not pinched or in contact with any hot surfaces.
5. คู่มือการใช้งาน
The DHCS13 drum heater is equipped with an adjustable thermostat for precise temperature control.
- ปรับเทอร์โมสตัท: Locate the adjustable thermostat dial on the heater. The thermostat has a temperature range of 50°F to 425°F (10°C to 218°C).
- ตั้งอุณหภูมิที่ต้องการ: Rotate the dial to set the desired temperature for the contents of the drum. Start with a lower setting and gradually increase if higher temperatures are required.
- ตรวจสอบความร้อน: The heater will begin to warm the drum. The thermostat will cycle the heating element on and off to maintain the set temperature.
- การป้องกันอุณหภูมิเกิน: The maximum exposure temperature on the heating surface is 450°F (232°C). The thermostat will prevent the surface from exceeding this temperature.
- หมดแรง: To turn off the heater, unplug it from the power outlet.
บันทึก: The actual temperature of the drum contents may vary based on ambient temperature, drum material, and the specific properties of the material being heated. It is recommended to monitor the internal temperature of the drum contents, especially for temperature-sensitive materials.
6. การบำรุงรักษา
Regular maintenance ensures the longevity and safe operation of your BriskHeat DHCS13 drum heater.
- การทำความสะอาด: Disconnect the heater from power before cleaning. Use a damp cloth to wipe down the exterior of the heater. Do not use abrasive cleaners or solvents that could damage the silicone rubber.
- การตรวจสอบ: Periodically inspect the heater for any signs of wear, damage, or fraying of the power cord. Check the integrity of the silicone rubber and the spring closure mechanism.
- พื้นที่จัดเก็บ: When not in use, store the heater in a clean, dry place, away from direct sunlight and extreme temperatures.
- การซ่อมแซม: Do not attempt to repair damaged components yourself. Contact BriskHeat customer support or a qualified technician for repairs.
7 การแก้ไขปัญหา
If you encounter issues with your DHCS13 drum heater, refer to the following common troubleshooting steps:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Heater not warming up. | ไม่มีไฟเข้าตัวเครื่อง ตัวควบคุมอุณหภูมิตั้งไว้ต่ำเกินไป ปลั๊กไฟชำรุด | Check if the heater is plugged in. เพิ่มการตั้งค่าเทอร์โมสตัท ทดสอบเต้ารับกับอุปกรณ์อื่นหรือลองใช้เต้ารับอื่น |
| Heater not reaching desired temperature. | ตัวควบคุมอุณหภูมิตั้งไว้ต่ำเกินไป Drum contents too cold or large volume. Poor contact with drum surface. | เพิ่มการตั้งค่าเทอร์โมสตัท Allow more time for heating, or consider additional insulation for the drum. Ensure the heater is snugly secured around the drum. |
| เครื่องทำความร้อนเปิดและปิดบ่อยครั้ง | Normal operation (thermostat maintaining temperature). Thermostat sensor issue. | This is typically normal. If cycling is excessive or erratic, contact support. |
| Visible damage to heater or cord. | ความเสียหายทางกายภาพ | Immediately disconnect power. Do not use. Contact BriskHeat for repair or replacement. |
If the problem persists after attempting these solutions, please contact BriskHeat customer support.
8. ข้อมูลจำเพาะ
| คุณลักษณะ | ค่า |
|---|---|
| หมายเลขรุ่น | DHCS13 |
| ความจุถัง | 30-Gallon (114L) Metal Drums |
| เล่มที่tage | 120VAC |
| วัตต์ | 1000วัตต์ |
| ช่วงอุณหภูมิของเทอร์โมสตัท | 50°F ถึง 425°F (10°C ถึง 218°C) |
| Maximum Exposure Temperature (Heating Surface) | 450°ฟาเรนไฮต์ (232°เซลเซียส) |
| วัสดุ | 2-Layer Fiberglass Reinforced Silicone Rubber |
| ความแข็งแรงของฉนวนไฟฟ้า | 2000โวลต์ |
| ขนาด (กว้าง x ยาว) | 4 นิ้ว (102 มม.) x 58.5 นิ้ว (1496 มม.) |
| Diameter (for drum) | 18.6นิ้ว (473มม.) |
| ความยาวสายไฟ | 6ฟุต (1.8ม.) |
| ประเภทปลั๊ก | Standard 3-prong (NEMA 5-15) |
| การต่อลงดิน | ติดดิน |
9. การรับประกันและการสนับสนุน
BriskHeat products are manufactured to the highest quality standards. For information regarding product warranty, please refer to the warranty statement provided with your purchase or visit the official BriskHeat webเว็บไซต์.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact BriskHeat customer support:
- ผู้ผลิต: บริสก์ฮีท
- ข้อมูลติดต่อ: Refer to the BriskHeat webตรวจสอบข้อมูลติดต่อล่าสุดได้จากเว็บไซต์หรือบรรจุภัณฑ์ของผลิตภัณฑ์