3M Specialty Adhesive Remover 38987 Instruction Manual

สินค้าเกินview

The 3M Specialty Adhesive Remover 38987 is a solvent-based product formulated for the effective removal of reactive adhesives from various surfaces. Reactive adhesives are those that require a hardener or catalyst to form a bond, including but not limited to epoxies, urethanes, and silicones.

Image: 3M Specialty Adhesive Remover 38987 in an aerosol can.

คุณสมบัติหลัก:

• Specifically designed to remove reactive adhesives.
• Effective on epoxies, urethanes, and silicones.
• Solvent-based formulation for strong adhesive breakdown.
• Suitable for use on a variety of substrates.

ข้อมูลด้านความปลอดภัย

WARNING: For industrial/occupational use only. Not for consumer sale or use. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.

This product contains strong solvents. Always read and understand the Safety Data Sheet (SDS) before use. Ensure adequate ventilation during application. Use in a well-ventilated area or outdoors.

ข้อควรระวัง:

• อุปกรณ์ป้องกันส่วนบุคคล (PPE): Wear appropriate chemical-resistant gloves (e.g., nitrile), eye protection (safety glasses or goggles), and respiratory protection if ventilation is inadequate.
• ความสามารถในการติดไฟ: เก็บให้ห่างจากความร้อน ประกายไฟ เปลวไฟ และพื้นผิวที่ร้อน ห้ามสูบบุหรี่
• การสัมผัสผิวหนัง: หลีกเลี่ยงการสัมผัสผิวหนังเป็นเวลานานหรือซ้ำๆ ล้างมือให้สะอาดด้วยสบู่และน้ำหลังการใช้งาน
• การสบตา: In case of contact, rinse immediately with plenty of water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention if irritation persists.
• การหายใจเข้า: Avoid breathing vapors. If inhaled, remove to fresh air. If symptoms persist, seek medical attention.
• การกลืนกิน: Do not ingest. If swallowed, do NOT induce vomiting. Call a poison center or doctor immediately.
• พื้นที่จัดเก็บ: Store in a cool, well-ventilated place. Keep container tightly closed. Keep out of reach of children.
• ความเข้ากันได้ของพื้นผิว: Always test on an inconspicuous area first to ensure compatibility with the substrate, as some surfaces (e.g., certain plastics, painted finishes) may be damaged by solvents.

การตั้งค่า

Before beginning the adhesive removal process, ensure proper preparation to achieve the best results and maintain safety.

1. โปรดอ่านข้อมูลด้านความปลอดภัย: อย่างระมัดระวังview the Safety Information section and the product's Safety Data Sheet (SDS).
2. เตรียมพื้นที่ทำงาน: Ensure the work area is well-ventilated. If working indoors, open windows and doors, or use exhaust fans. If working outdoors, choose an area away from ignition sources.
3. รวบรวมอุปกรณ์ป้องกันส่วนบุคคล (PPE): Put on appropriate personal protective equipment, including chemical-resistant gloves, eye protection, and if necessary, a respirator.
4. Protect Surrounding Areas: Cover adjacent areas not intended for treatment with drop cloths or plastic sheeting to prevent accidental contact or overspray.
5. Test Surface Compatibility: Apply a small amount of the adhesive remover to an inconspicuous area of the surface. Observe for any adverse reactions such as discoloration, etching, or softening of the material. Proceed only if no damage occurs.
6. เตรียมเครื่องมือ: Have clean rags, plastic scrapers, or other non-abrasive tools ready for wiping and scraping the softened adhesive.

คำแนะนำการใช้งาน

Follow these steps for effective removal of reactive adhesives using 3M Specialty Adhesive Remover 38987.

1. เขย่ากระป๋อง: Shake the aerosol can thoroughly for at least one minute before use to ensure proper mixing of contents.
2. ใช้น้ำยาล้างคราบ: Hold the can approximately 6-12 inches (15-30 cm) from the surface. Spray a liberal, even coat of the adhesive remover directly onto the adhesive residue. Ensure the adhesive is fully saturated.
3. อนุญาตให้ซึมผ่าน: Allow the product to dwell on the adhesive for several minutes (typically 5-15 minutes). The exact time may vary depending on the type and thickness of the adhesive. The remover will begin to soften and loosen the adhesive. Do not allow the product to dry on the surface.
4. Scrape/Wipe: Using a plastic scraper or a clean, non-abrasive cloth, gently scrape or wipe away the softened adhesive. For stubborn residues, reapply the remover and allow more dwell time.
5. ทำซ้ำหากจำเป็น: For heavy or aged adhesive, multiple applications and scraping/wiping cycles may be required.
6. พื้นผิวสะอาด: After all adhesive residue is removed, wipe the surface clean with a fresh, clean cloth. For best results, follow with a mild soap and water wash, then rinse and dry the surface.
7. การกำจัดขยะ: Dispose of all used rags and adhesive residue according to local regulations for hazardous waste.

การซ่อมบำรุง

Proper storage ensures the longevity and effectiveness of your 3M Specialty Adhesive Remover 38987.

• เงื่อนไขการจัดเก็บ: Store the product in its original container, tightly closed, in a cool, dry, and well-ventilated area.
• อุณหภูมิ: Avoid extreme temperatures. Do not store above 120°F (49°C) or below 32°F (0°C).
• Away from Ignition Sources: Keep away from all sources of ignition, including direct sunlight, heat, sparks, and open flames.
• ความปลอดภัยของเด็ก: เก็บให้พ้นมือเด็กและสัตว์เลี้ยง

การแก้ไขปัญหา

If you encounter issues while using the 3M Specialty Adhesive Remover 38987, consider the following common solutions:

ข้อมูลจำเพาะ

การรับประกัน

The 3M Specialty Adhesive Remover 38987 is covered by a warranty as labeled on the product packaging. For specific details regarding warranty terms and conditions, please refer to the information provided directly on the product container or contact 3M customer service.

สนับสนุน

For additional product information, technical assistance, or safety data sheets, please contact 3M directly or visit their official webเว็บไซต์.

• ผู้ผลิต: 3M
• Webเว็บไซต์: www.3M.com
• ร้านค้าแบรนด์: 3M Automotive Store on Amazon

For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.